Expanding the Scope of the Cleavable N-(Methoxy)oxazolidine Linker for the Synthesis of Oligonucleotide Conjugates

Oligonucleotides modified by a 2′-deoxy-2′-(N-methoxyamino) ribonucleotide react readily with aldehydes in slightly acidic conditions to yield the corresponding N-(methoxy)oxazolidine-linked oligonucleotide-conjugates. The reaction is reversible and dynamic in slightly acidic conditions, while the products are virtually stable above pH 7, where the reaction is in a ‘‘switched off-state’’. Small molecular examinations have demonstrated that aldehyde constituents affect the cleavage rate of the N-(methoxy)oxazolidine-linkage. This can be utilized to adjust the stability of this pH-responsive cleavable linker for drug delivery applications. In the present study, Fmoc-β-Ala-H was immobilized to a serine-modified ChemMatrix resin and used for the automated assembly of two peptidealdehydes and one aldehyde-modified peptide nucleic acid (PNA). In addition, a triantennary N-acetyl-d-galactosamine-cluster with a β-Ala-H unit has been synthesized. These aldehydes were conjugated via N-(methoxy)oxazolidine-linkage to therapeutically relevant oligonucleotide phosphorothioates and one DNA-aptamer in 19–47% isolated yields. The cleavage rates of the conjugates were studied in slightly acidic conditions. In addition to the diverse set of conjugates synthesized, these experiments and a comparison to published data demonstrate that the simple conversion of Gly-H to β-Ala-H residue resulted in a faster cleavage of the N-(methoxy)oxazolidine-linker at pH 5, being comparable (T_0.5 ca 7 h) to hydrazone-based structures.     

Synthesis of 4,4′-bis(4-aminophenoxy)benzophenone and polyimides based on this compound

Synthesis of 4,4-bis(4-aminophenoxy)benzophenone was performed starting from chloral. Various polyimides were obtained by reactions of 4,4 -bis(4-aminophenoxy)benzophenone with aromatic tetracarboxylic acid dianhydrides. Some of the polyimides obtained are crystalline compounds.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 673–676, March, 1996.     

On the long‐range relativistic effects in the 15N NMR chemical shifts of halogenated azines

Long‐range β‐ and γ‐relativistic effects of halogens in ¹⁵N NMR chemical shifts of 20 halogenated azines (pyridines, pyrimidines, pyrazines, and 1,3,5‐triazines) are shown to be unessential for fluoro‐, chloro‐, and bromo‐derivatives (1–2 ppm in average). However, for iodocontaining compounds, β‐ and γ‐relativistic effects are important contributors to the accuracy of the ¹⁵N calculation. Taking into account long‐range relativistic effects slightly improves the agreement of calculation with experiment. Thus, mean average errors (MAE) of ¹⁵N NMR chemical shifts of the title compounds calculated at the non‐relativistic and full 4‐component relativistic levels in gas phase are accordingly 7.8 and 5.5 ppm for the range of about 150 ppm. Taking into account solvent effects within the polarizable continuum model scheme marginally improves agreement of computational results with experiment decreasing MAEs from 7.8 to 7.4 ppm and from 5.5 to 5.3 ppm at the non‐relativistic and relativistic levels, respectively. The best result (MAE: 5.3 ppm) is achieved at the 4‐component relativistic level using Keal and Tozer's KT3 functional used in combination with Dyall's relativistic basis set dyall.av3z with taking into account solvent effects within the polarizable continuum solvation model. The long‐range relativistic effects play a major role (of up to dozen of parts per million) in ¹⁵N NMR chemical shifts of halogenated nitrogen‐containing heterocycles, which is especially crucial for iodine derivatives. This effect should apparently be taken into account for practical purposes.     

N‐bromo‐hydantoin grafted polystyrene beads: Synthesis and nano‐micro beads characteristics for achieving controlled release of active oxidative bromine and extended microbial inactivation efficiency

N‐bromo‐hydantoin and N‐bromo‐5,5′‐dimethylhydantoin conjugated polystyrene beads were synthesized from chloromethyl polystyrene beads which differ in their particles size, crosslinking, nano‐micro porosity, and tunnels size on the surface, in order to study the effect of these parameters on oxidative halogen release and resultant activity, for water purification applications. The synthesized beads were characterized using elemental analysis, FT‐IR, solid state ¹³C‐NMR, and scanning electron microscope (SEM). The conjugation yield and kinetics in different solvents and bromine loading capacity were studied. The N‐bromoamine polystyrene beads were tested for water decontamination according to NSF 231 protocol. The release of active bromine was analyzed by spectrophotometer using a DPD‐1 kit and also studied the antimicrobial activity against Escherichia coli and MS2 phages. Bead's nano‐micro characteristics were found critical for oxidative halogen release control: rate stabilization and modulation, extension and also influences antimicrobial activity. The synthesized beads exhibited extended and stable release of bromine, 6 and 4 log reduction for E. coli and MS2, respectively for 250 L of passing contaminated water. Thus, N‐halamine hydantoins conjugated polystyrenes, chemically or kinetically release modified should have applications as disinfectants in water purification systems as well as medical field. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 596–610     

Effect of Polymerizable Photoinitiators on the UV‐polymerization behaviors of photosensitive polysiloxane

In this contribution, three polymerizable benzophenone photoinitiators containing maleimide group including 4‐maleimidebenzophenone (MBP), 4‐chlorine‐4′‐maleimide benzophenone (CMBP), and 4‐maleimide‐4′‐[(4‐maleimide)thiophenyl]benzophenone (MMTBP) were designed and synthesized to enhance the polymerization degree of photosensitive polysiloxane containing methacryloxy active groups (MAPSO). The polymerization behaviors of the MAPSO cured by different photoinitiators were investigated using Fourier transform infrared (FTIR). It was noted that the MAPSO initiated by MMTBP showed a high carbon–carbon double bond conversion above 80% because of the existence of thiophenyl group which could generate more radicals from the photolysis reaction at the C? S bond. In addition, the thermal stability of the UV‐cured MAPSO were studied by thermogravimetric analysis (TGA), the result showed that the initial 5% mass loss (T _5%) and residual weight percent at 800 °C in nitrogen of the UV‐cured MAPSO initiated by MMTBP systems was 200 °C and 33.8%. Thus, this work provides a new perspective and efficient strategy to improve the polymerization degree of UV‐curable polysiloxanes with carbon–carbon double bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1696–1705     

Reactivity of Various α-Halo Ketones in One-Pot Synthesis of γ-Iminolactones

The highly reactive 1:1 intermediate generated in the reaction of tert-butyl isocyanide and dialkyl acetylenedicarboxylate is trapped by α-halo ketones to produce halogenated iminolactones as the sole product in good yields.     

Study on the Synthesis and Bioactivity of Novel Mahkoside A Derivatives

Abstract

A series of novel Mahkoside A derivatives was synthesized, and their in vitro cytotoxic activities were evaluated against the human cancer cell line Ec‐9706. A Preliminary structure–activity relationship study showed compounds 7 and 8 have obvious cytotoxic activities (IC₅₀: 30.0 and 12.5 µg · mL^?1, respectively).     

Cooperative Effect of Noncovalent Interactions on Tetrel Bonding in Halogenated Silanes

Tetrel bond, a weak noncovalent interaction between the σ-hole of a Group IV element (silicon in our case) and the cloud of an electronegative element (oxygen in our case) is the focus of this work. The percentage strengthening of tetrel bond has been investigated by optimizing 16 binary complexes of halogenated silane and water of general formula SiX_nH_4−n−H₂O and 16 ternary complexes, of general formula NaX−SiX_nH_4−n−H₂O, where X=F, Cl, Br and I and n=1, 2, 3 and 4 at various levels of theory defined within the formalism of density functional theory (DFT). With the addition of NaX, tetrel bond between Si and O in SiX_nH_4−n−H₂O gets strengthened up to 49 %, owing to cooperativity effect exerted by hydrogen bonding between X and H in the ternary complex NaX−SiX_nH_4−n−H₂O. In the series of complexes studied here, overall stabilization due to cooperativity lies between 10 kJ/mol to 170 kJ/mol. This large extent of reinforcement due to cooperativity has never been showcased before. The exceptional stabilization and reinforcement owe its genesis to the transformation of the ternary complex into a cluster orchestrated by the H-bonding in most of the cases and covalent bonding in few of the cases.     

还原-氧化协同降解全/多卤代有机污染物

全/多卤代有机污染物大多具有生态毒性、生物蓄积性、环境持久性及长距离迁移性,不仅危害环境与生态安全,而且可经食物链传递威胁人类健康。由于卤原子是吸电子基团且取代数目多,这类物质的最高占据分子轨道能较低,难于被氧化降解,相反较易被还原法脱卤降解。随卤原子取代数减少,脱卤产物难被进一步还原,而其毒性甚至高于母体污染物。注意到低卤代有机物更容易发生氧化降解,一些研究构建了还原-氧化接力降解体系,即先利用还原法将全/多卤代有机污染物还原为低卤代产物,再利用氧化法降解这些中间产物,从而实现深度/完全脱卤和矿化。本文根据催化反应类型对还原-氧化联用法进行了归纳,分类介绍了基于传统化学催化、光催化、电化学、光电化学及机械化学等构建还原-氧化协同降解体系的原理及应用,以期为开发高效的处置技术提供思路和建议。