Vehicle density and velocity estimation on highways for on-ramp metering control

A scheme for vehicle density and velocity estimation in a stretch of highway based on a modified cell transmission model [C. F. Daganzo, Transportation Research, Part B, 28B(4),269–287, 1994. Elsevier is presented. The scheme is intended for use with on-ramp metering control algorithms, providing local knowledge of densities and velocities that is helpful to improve on-ramp metering control performance. Estimation of density is obtained by nonlinear estimators, while velocity estimation is obtained by gradient algorithms. There is one density–velocity estimator for free traffic flow and other for congested traffic flow. Both estimator schemes work in parallel. The final estimation of density and velocity results from a convex combination of the predictions of the two estimators. This combination depends on occupancy or density measurements at the boundaries of the stretch and is produced by a fuzzy inference system. Stability and convergence of the density and velocity estimation scheme is proved by Lyapunov based techniques. Simulation results comparing measured and estimated traffic data are presented. They confirm good performance of the estimators. Research sponsored by grants UNAM PAPIIT IN110403 and CONACYT 47583.     

Limited resolution in complex network community detection with Potts model approach

According to Fortunato and Barthélemy, modularity-based community detection algorithms have a resolution threshold such that small communities in a large network are invisible. Here we generalize their work and show that the q-state Potts community detection method introduced by Reichardt and Bornholdt also has a resolution threshold. The model contains a parameter by which this threshold can be tuned, but no a priori principle is known to select the proper value. Single global optimization criteria do not seem capable for detecting all communities if their size distribution is broad.     

Zero bias anomaly in the density of states of low-dimensional metals

We consider the effect of Coulomb interactions on the average density of states (DOS) of disordered low-dimensional metals for temperatures T and frequencies ω smaller than the inverse elastic life-time 1/τ. Using the fact that long-range Coulomb interactions in two dimensions (2d) generate ln²-singularities in the DOS ν(ω) but only ln-singularities in the conductivity σ(ω), we can re-sum the most singular contributions to the average DOS via a simple gauge-transformation. If σ(ω) > 0, then a metallic Coulomb gapν(ω) ∝ |ω|/e ⁴ appears in the DOS at T = 0 for frequencies below a certain crossover frequency Ω ₂ which depends on the value of the DC conductivity σ(0). Here, - e is the charge of the electron. Naively adopting the same procedure to calculate the DOS in quasi 1d metals, we find ν(ω) ∝ (|ω|/Ω ₁)^1/2exp(- Ω ₁/|ω|) at T = 0, where Ω ₁ is some interaction-dependent frequency scale. However, we argue that in quasi 1d the above gauge-transformation method is on less firm grounds than in 2d. We also discuss the behavior of the DOS at finite temperatures and give numerical results for the expected tunneling conductance that can be compared with experiments. Received 28 August 2001 / Received in final form 28 January 2002 Published online 9 July 2002     

Laser spectroscopy of high spin isomers – a review

This review summarizes the experimental data on charge radii differences among ground state and high spin isomeric states determined by high-resolution laser spectroscopic methods. A comparison is presented between radii changes obtained from the isomeric shifts in the atomic spectra and from the quadrupole moments of both ground and isomeric states under the assumption that the radii changes are determined by the difference of the quadrupole deformations. Special attention is paid to isomers arising from the break-up of nucleon pairs and isomers of odd–odd nuclei. The characteristic features of the radii changes for isomeric states of different origin are discussed.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

On the convergence rate and optimization of a numerical method with splitting of boundary conditions for the stokes system in a spherical layer in the axisymmetric case: Modification for thick layers

The convergence rate of a fast-converging second-order accurate iterative method with splitting of boundary conditions constructed by the authors for solving an axisymmetric Dirichlet boundary value problem for the Stokes system in a spherical gap is studied numerically. For R/r exceeding about 30, where r and R are the radii of the inner and outer boundary spheres, it is established that the convergence rate of the method is lower (and considerably lower for large R/r) than the convergence rate of its differential version. For this reason, a really simpler, more slowly converging modification of the original method is constructed on the differential level and a finite-element implementation of this modification is built. Numerical experiments have revealed that this modification has the same convergence rate as its differential counterpart for R/r of up to 5 × 10³. When the multigrid method is used to solve the split and auxiliary boundary value problems arising at iterations, the modification is more efficient than the original method starting from R/r ～ 30 and is considerably more efficient for large values of R/r. It is also established that the convergence rates of both methods depend little on the stretching coefficient η of circularly rectangular mesh cells in a range of η that is well sufficient for effective use of the multigrid method for arbitrary values of R/r smaller than ～ 5 × 10³.     

煤矿瓦斯和煤尘监控的数学模型

结合2006年全国大学生数学建模竟赛D题,借助Matlab软件,通过数学建模,计算出有关煤矿瓦斯和煤尘的3个主要安全指标,从而为解决煤矿实际安全生产提供了参考.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

具功能反应的三种群捕食者——食饵系统数学模型稳定性的研究

[1]中提出了具有功能反应的三种群捕食者——食饵系统的两种模型(Ⅰ)、(Ⅱ),并给出了局部渐近稳定的条件。本文研究了另外两种模型(Ⅲ)和(Ⅳ)的局部渐近稳定的条件。     

二维随机激光器的模式选择及阈值与饱和特性

基于将Maxwell方程与四能级原子系统速率方程相结合而建立起随机激光时域理论，并利用有限时域差分法，研究了二维随机介质中激光模式的输出特性与介质尺寸、外形及抽运速率等参数的关系.结果表明，与传统激光模式相似，随机激光模式的强度随抽运速率的变化不仅具有阈值特性，而且具有饱和特性.基于模式特性对介质及抽运参数的依赖关系，提出了二维随机激光器的选模方式，在很大程度上不同于传统激光器的选模方式. 关键词： 随机激光器 模式选择 无序介质中的光学特性