Determination of Trichloroacetic Acid (TCAA) Using CdO Nanoparticles Modified Carbon Paste Electrode

In this paper, the electrochemical behavior of a carbon paste electrode modified with CdO nanoparticles as a potential electrocatalyst for the reduction of trichloroacetic acid (TCAA) was investigated using cyclic voltammetry and double‐potential step chronoamperometry. The modified electrode showed a great enhancement in cathodic peak current with respect to reduction of TCAA in acidic aqueous solution. Using this increment, a quantitative method was developed for the determination of TCAA in aqueous solution. The detection limit and linear dynamic range of TCAA are 2.3×10^?6 M and 2.3×10^?4–3×10^?6 M, respectively.     

Nano composite system based on coumarin derivative–titanium dioxide nanoparticles and ionic liquid: Determination of levodopa and carbidopa in human serum and pharmaceutical formulations

The combination of coumarin derivative (7-(1,3-dithiolan-2-yl)-9,10-dihydroxy-6H-benzofuro[3,2-c]chromen-6-on), (DC)–titanium dioxide nanoparticles (TiO₂) and ionic liquid (IL) yields nanostructured electrochemical sensor, formed a novel kind of structurally uniform and electrocatalytic activity material. This new ionic liquid–TiO₂ nanoparticles modified carbon paste electrode (IL–CTP) due to its enhanced conductivity presented very large current response from electroactive substrates. The modified electrode was characterized by different methods including a scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS) and voltammetry. A pair of well-defined quasi reversible redox peaks of coumarin derivative was obtained at the modified carbon paste electrode (DC/IL–CTP) by direct electron transfer between the coumarin derivative and the CP electrode. Dramatically enhanced electrocatalytic activity was exemplified at the DC/IL–CTP electrode, as an electrochemical sensor to study the electro oxidation of levodopa (LD) and carbidopa (CD). Based on differential pulse voltammetry (DPV), the oxidation of LD and CD exhibited the dynamic range between 0.10– 900.0 μM and 20.0–900.0 μM respectively, and the detection limit (3σ) for LD and CD were 41 nM and 0.38 μM, respectively. DPV was used for simultaneous determination of LD and CD at the DC/IL–CTP electrode, and quantitation of LD and CD in some real samples (such as tablets of Parkin-C Fort and Madopar, Sinemet, water, urine, and human blood serum) by the standard addition method.     

Electroless plating of copper on fly ash cenospheres using polyaniline‐Pd activation

The polyaniline of different intrinsic oxidation states, viz., the emeraldine (EM) and the leucoemeraldine (LM) states, were coated on 3‐aminopropyltriethoxy silane modified fly ash cenospheres. Without prior sensitization by SnCl₂ solution, Pd activation by PdCl₂ solution was carried out on EM and LM laden cenospheres, followed by electroless plating of copper (Cu). The topography and composition of the composites were characterized by scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy, etc. The results indicate that the oxidation state of the LM layer showed a much bigger increase than that of the EM layer in the Pd activation process, while coupled Pd reduction underwent to a more extent on the LM layer. The metallic Pd atoms on the LM and EM layers surface initiated the subsequent electroless plating of Cu, and the coated Cu on LM laden cenospheres had a much more uniform and compact morphology than that on EM laden cenospheres. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Comb polymers are commonly used as dispersants to stabilize highly concentrated cement suspensions. The effectiveness of such polymeric additives to stabilize these suspensions is determined to a large extent by the amount adsorbed. In this study we investigated the adsorption characteristics of various comb dispersant containing different graft densities on surfaces of cement particle. The effect of inorganic salts on their adsorption was also examined in order to elucidate their adsorption mechanism. The results show that the adsorption of comb polymer dispersants on cement surface conforms approximately to Langmuir's adsorption isotherm and the characteristic plateau A _s and adsorption free energy ΔG_ads are largely dependent on the anionic group content of the comb polymers. The A _s and ΔG_ads increase with increasing anionic group content. This information suggests that the adsorption of comb polymers on cement surfaces is dominated by electrostatic interaction between COO-groups on the comb polymers and the positive surface of the cement. This conclusion is supported by effects of inorganics such as calcium and sulfate ions, and diffuse reflectance FTIR spectroscopy. The implication of results for tuning polymers for the required performance in cement manufacture should be noted.     

A New Organophosphorus Insecticides Removal Process Using Fly ASH

Abstract

Fly ash and soil mixtures with a range of fly ash content from 1 to 100% were used to study adsorption and desorption of four organophosphorus insecticides, ethyl parathion, methyl parathion, fenitrothion and fenthion, in batch experiments. The object of the study was to develop a treatment process using fly ash as sorbent material to isolate/immobilize organic contaminants from aqueous solutions. The adsorption isotherms fit the Freundlich equation x/m=K_dC^1/n. The K_d values increase with the increase of the fly ash content. The isotherms seem to fit the S type, in mixtures of soil with a fly ash content from 0 to 10%, which implies that adsorption becomes easier as the concentration in the liquid phase increases. In mixtures of soil with a fly ash content from 25 to 50% the isotherms become L type and correspond to a decrease of site availability as the solution concentration increases. Finally in mixtures of soil with a fly ash content over 50%, C type adsorption was observed which correspond to a constant partition of the insecticides between the bulk solution and the adsorbent. Mass balance estimations show that the mean percent amounts of insecticides for a range of concentration 0.5–15 mg/l, removed by adsorption in the soil sample are 81.56 % for ethyl parathion, 48.97 % for methyl parathion, 67.06 % for fenitrothion and 86.65 % for fenthion. The adsorption increases as the fly ash content increased and reach the 100% in the “pure” fly ash. The adsorbed amounts of insecticides in mixtures of soils with >50% fly ash content, are up to 99%. In contrast, the amounts of desorption in water decrease as the fly ash content increase.

The results of this research demonstrate that the fly ash shows a significant capacity for adsorption of organophosphorus compounds from aqueous solution and can be used for pesticide removal process.     

OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

Elution behaviour and environmental impact of heavy metals and rare-earth elements from volcanic ashes of Mt. Oyama,Miyake Island

To obtain information on the environmental impact of materials eluted from volcanic ashes of Mt. Oyama, Miyake Island, which erupted in July 2000, the dissolution behaviours of heavy metals and rare-earth elements from the volcanic ashes were examined. The most important characteristic of the Mt. Oyama eruption is that sulphur dioxide (SO₂) gas has been continuously released, and all persons living on Miyake Island have been required to evacuate. To estimate in terms of the volcanic eruption using SO₂ gas, the ash nature in Mt. Usu, Hokkaido, was also examined and compared with that in Mt. Oyama. When rain water mixed the ashes, the water from the ashes of Mt. Oyama became acidic because of the sulphuric acid. Therefore, SO₂ gas in Mt. Oyama can accelerate the dissolution of protons and heavy metals in the ashes, whereas the rain water in Mt. Usu was not acidic and the dissolution of the heavy metals was not so evident compared with that in the case of Mt. Oyama. With this sulphuric acid, heavy metals such as As, Cd, Pb and Hg in the ashes in Mt. Oyama easily dissolved owing to the low pH. The ashes in Mt. Oyama had been released for eight years and the amount of fallen ashes was estimated to be 33 billion tons. The weights of the harmful heavy metals in the volcanic ashes, such as As, Cd, Pb and Hg, were estimated to be 3.8?×?10², 1.3?×?10³, 1.1?×?10³ and 29?kg, respectively, and these heavy metals were dissolved and diluted in seawater. Therefore, the concentration and species (chemical form) of these metals should be carefully monitored in the future. Moreover, SO₂ gas, which has a direct effect on human health and has been monitored continuously, causes other effects, such as facilitation of metal ion elution and rock aeration.     

Adsorptive transfer voltammetry applied to the study of chromium-induced DNA damage in the presence of curcumin

The interaction between double-stranded (ds) calf-thymus DNA and chromium in the presence of curcumin (CC) was studied by differential pulse adsorptive transfer voltammetry using carbon paste electrode (CPE). Curcumin–Cr complex generated changes in calf thymus DNA. The mechanism for DNA cleavage by curcumin–Cr complex appears to involve both the hydroxyl radical as well as singlet oxygen. The characteristic peak of dsDNA, due to the oxidation of guanine residues, drastically decreased. The increased DNA damage by curcumin–Cr complex was observed in the presence of various concentrations of chromium(VI).     

Concise Synthesis of (3Z)-Dodecen-12-olide,Pheromone Component of the Emerald Ash Borer

Emerald ash borer (EAB), Agrilus planipennis Fairmaire, is an invasive insect that has killed millions of ash trees in Canada and the USA. (3Z)-Dodecen-12-olide is a known female-produced pheromone of this insect, and a concise, three-step synthesis of a 2:1 blend of (3Z)-dodecen-12-olide and (3E)-dodecen-12-olide starting from commercially available (2-carboxyethyl)triphenylphosphonium bromide and 10-bromo-1-decene is described. The key steps in this synthesis are a lithium-salt-free Wittig reaction and an intramolecular S_N2 esterification. Both of these macrocyclic lactones are behaviorally active toward EAB, and the 2:1 blend whose synthesis is described here has the potential to be a detection agent, mating disruptor, or mass trapping agent, which could be used in the control of EAB.     

基于布谷鸟算法与BP神经网络的煤灰变形温度预测

以120种煤样为数据基础,采用布谷鸟算法(CS)优化BP(Back Propagation)神经网络,建立了CSBP模型对单煤、煤掺添加剂和配煤等3类样本的煤灰变形温度(DT)样本进行预测。模型以煤灰化学成分及其组合参数等13个变量作为输入量,以变形温度(DT)作为输出量。CSBP模型预测结果与BP神经网络模型预测结果进行对比发现,无论是单煤、煤掺添加剂还是配煤,CSBP模型较BP模型对煤灰变形温度(DT)的预测都更加精准,平均相对误差分别达到了3.11%、4.08%和4.22%。另外,对比3类样本预测结果发现,无论是CSBP模型还是BP模型,相比单煤预测而言,煤掺添加剂及配煤的预测误差都有明显的增加。