Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Thermodynamics and kinetics of the hydride-transfer cycles for 1-aryl-1,4-dihydronicotinamide and its 1,2-dihydroisomer

Five 1-(p-substituted phenyl)-1,4-dihydronicotinamides (GPNAH-1,4-H(2)) and five 1-(p-substituted phenyl)-1,2-dihydronicotinamides (GPNAH-1,2-H(2)) were synthesized, which were used to mimic NAD(P)H coenzyme and its 1,2-dihydroisomer reductions, respectively. When the 1,4-dihydropyridine (GPNAH-1,4-H(2)) and the 1,2-dihydroisomer (GPNAH-1,2-H(2)) were treated with p-trifluoromethylbenzylidenemalononitrile (S) as a hydride acceptor, both reactions gave the same products: pyridinium derivative (GPNA(+)) and carbanion SH(-) by a hydride one-step transfer. Thermodynamic analysis on the two reactions shows that the hydride transfer from the 1,2-dihydropyridine is much more favorable than the hydride transfer from the corresponding 1,4-dihydroisomer, but the kinetic examination displays that the former reaction is remarkably slower than the latter reaction, which is mainly due to much more negative activation entropy for the former reaction. When the formed pyridinium derivative (GPNA(+)) was treated with SH(-), the major reduced product was the corresponding 1,4-dihydropyridine along with a trace of the 1,2-dihydroisomer. Thermodynamic and kinetic analyses on the hydride transfer from SH(-) to GPNA(+) all suggest that the 4-position on the pyridinium ring in GPNA(+) is much easier to accept the hydride than the 2-position, which indicates that when the 1,4-dihydropyridine is used the hydride donor to react with S, the formed pyridinium derivative GPNA(+) may return to the 1,4-dihydropyridine by a hydride transfer cycle; but when the 1,2-dihydropyridine is used as the hydride donor, the formed pyridinium derivative can not return to the 1,2-dihydropyridine by the hydride reverse transfer from SH(-) to GPNA(+). These results clearly show that the hydride-transfer cycle is favorable for the 1,4-dihydronicotinamides, but unfavorable for the corresponding 1,2-dihydroisomers.     

Phenol O–H bond dissociation energy in water clusters

We are reporting ab initio and density functional theory (DFT) calculations for the phenol O–H bond dissociation energy in the gas phase and in phenol–water clusters. We have tested a series of recently proposed functionals and verified that DFT systematically underestimates the O–H bond dissociation energy of phenol. However, O–H bond dissociation energies in water clusters are in reasonable agreement with experimental data for phenol in solution. We have evaluated electronic difference densities in phenol–water, phenoxy–water, and water, and we are suggesting that the representation of this quantity gives an interesting picture of the electronic density rearrangement induced by hydrogen bond interactions in phenol–water clusters. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Manipulating the surface properties of polyacrylamide with nitrogen plasma

Polyacrylamide (PAL) was physically adsorbed onto a hydroxylated silicon surface to form a uniform PAL film and the up-top PAL thin film was treated by nitrogen (N₂) plasma for surface modification. The atomic composition of the modified surface of the PAL film adsorbed on silicon substrate was analyzed with Fourier Transform Infrared Spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). The surface energy of PAL film was calculated from the data of contact angle of three-probe liquid. The FTIR results show an increase of peak intensity at 1214 cm⁻¹ (NH₂ stretch vibration) after the nitrogen plasma treatment, which confirms that the nitrogen was grafted to the PAL surface in the process of N₂-plasma treatment. The XPS results show that the ratio of relative intensity of N1s to O1s increases with increasing the plasma treatment time, which further affirms the formation of the amine groups on the PAL surface after the nitrogen plasma treatment. The surface tension increases with increasing the plasma grafting time. However, the surface energy decreases rapidly at the early stage when stored in air and approaches to an equilibrium value. It suggests that some physically-adsorbed ions and alkyl radicals on PAL surface can rapidly lose their activities. The increase of the surface tension of the plasma treated PLA films is due to the amine groups covalently grafted to PAL surface.     

A highly enantioselective one-pot synthesis of homoallylic alcohols via tandem asymmetric allyl transfer/olefin cross metathesis

A highly enantioselective one-pot synthesis of linear homoallylic alcohols with terminal ester functionality has been achieved. The reactions were controlled by ordered addition of reagents and catalysts, ensuring complete consumption of aldehyde. The synthetic utility of this strategy has been demonstrated in a short synthesis of a low boiling point intermediate for grahamimycin A.     

Silica nanoparticles for separation of biologically active amines by capillary electrophoresis with laser-induced native fluorescence detection

This paper describes the analysis of biologically active amines by capillary electrophoresis (CE) in conjunction with laser-induced native fluorescence detection. In order to simultaneously analyze amines and acids as well as to achieve high sensitivity, 10 mM formic acid solutions (pH < 4.0) containing silica nanoparticles (SiNPs) were chosen as the background electrolytes. With increasing SiNP concentration, the migration times for seven analytes decrease as a result of increase in electroosmotic flow (EOF) and decrease in their electrophoretic mobilities against EOF. A small EOF generated at pH 3.0 reveals adsorption of SiNPs on the deactivated capillary wall. The decreases in electrophoretic mobilities with increasing SiNP concentration up to 0.3x indicate the interactions between the analytes and the SiNPs. Having a great sensitivity (the limits of detection at a signal-to-noise ratio (S/N) = 3 of 0.09 nM for tryptamine (TA)), high efficiency, and excellent reproducibility (less than 2.4% of the migration times), this developed method has been applied to the analysis of urinal samples with the concentrations of 0.50 +/- 0.02 microM, 0.49 +/- 0.04 microM, and 74 +/- 2 microM for TA, 5-hydroxytryptamine, and tryptophan, respectively. The successful examples demonstrated in this study open up a possibility of using functional nanoparticles for the separation of different analytes by CE.     

Thermal stability and bond dissociation energy of fluorinated polymers: A critical evaluation

Intrinsic bond dissociation energies (BDEs) of selected fluorinated polymers are critically evaluated. Two distinctive approaches were followed. In the first one, according to Wu and Rodgers [E.-C. Wu, A.S. Rodgers, J. Am. Chem. Soc. 98 (1976) 6112-6115], starting from the gas-phase enthalpy of polymerization we obtained the polymer backbone BDE through appropriate thermodynamic cycles. Revised experimental results indicate that the CC BDEs of all the polymers taken into account fall within a limited energy interval, comparable to the average experimental uncertainty. Central to the second methodology adopted, is a model compound approach. Thanks to the large number of reliable thermodynamic data available in the scientific literature and to simple end-capping rules, C₂ molecules were chosen as suitable models for infinite linear polymers and alternating copolymers between ethylene and fluorinated olefins. For partially fluorinated polymers, like polyvinylidene fluoride (PVDF), alternating ethylene-tertrafluoroethylene (ETFE) and alternating ethylene-chlorotrifluoroethylene (ECTFE), the weight loss due to HF and HCl evolution during heating experiments was successfully related to the threshold energy E_o(HX) for 1,2-elimination from chemically activated hydrofluoro and hydrofluorochlorocarbons according to the modified Rice-Rampsberger-Kassel (RRKM) unimolecular theory.     

Calculating the energies for Ag(001) twist boundaries utilizing the modified analytical embedded atom method

The unrelaxed energies for Ag(001) twist grain boundaries (GBs) have been calculated using the modified analytical embedded atom method (MAEAM). The results show that, besides zero energy in a perfect crystal (corresponding to the twist angle 0°), the second smallest GB energy corresponds to the twist angle 36.87°. This is consistent with the experimental results. For other twist angles, the GB energies remain nearly constant even for a twist angle as small as 1.94°. Translation parallel to the boundary plane could result in a periodic change in GB energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Dihydrogen Adduct (Co–H2) Complexes Displaying H-Atom and Hydride Transfer

The prototypical reactivity profiles of transition metal dihydrogen complexes (M-H₂) are well-characterized with respect to oxidative addition (to afford dihydrides, M(H)₂) and as acids, heterolytically delivering H⁺ to a base and H⁻ to the metal. In the course of this study we explored plausible alternative pathways for H₂ activation, namely direct activation through H-atom or hydride transfer from the σ-H₂ adducts. To this end, we describe herein the reactivity of an isostructural pair of a neutral S= and an anionic S=0 Co-H₂ adduct, both supported by a trisphosphine borane ligand (P₃^B). The thermally stable metalloradical, (P₃^B)Co(H₂), serves as a competent precursor for hydrogen atom transfer to ^tBu₃ArO^⋅. What is more, its anionic derivative, the dihydrogen complex [(P₃^B)Co(H₂)]¹⁻, is a competent precursor for hydride transfer to BEt₃, establishing its remarkable hydricity. The latter finding is essentially without precedent among the vast number of M-H₂ complexes known.     

全内反射荧光成像技术及其在单分子检测中的研究进展

全内反射荧光显微镜技术是当今最灵敏的生物成像和检测方法之一,可以直接探测单个荧光分子。这种方法已成功地用于生命科学、化学、物理学等研究领域,获得了常规方法无法得到的重要信息。本文介绍了全内反射荧光显微镜的工作原理和实验技术,总结了近年来这种单分子检测方法在生命科学、化学等领域的重要应用,并对其发展前景进行了展望。