Physical Adsorption of H2S Related to the Conservation of Works of Art: The Role of the Pore Structure at Low Relative Pressure

The adsorption isotherms of H₂S in selected adsorbents were determined at 298 K, at relative pressures up to about 0.005, aiming the use of these materials in the removal of that pollutant from the museums atmosphere. The Dubinin-Astakhov equation adjusts very well the experimental results, although one cannot interpret the pre-exponential factor w₀ as the limiting adsorbed amount. The parameter E, related with the adsorption energy, and the parameter n, that can be associated with the surface heterogeneity of the adsorbents, are correlated and the first is also correlated with the adsorbed amounts. It was not found any expectable relationship between the adsorbed amounts and textural parameters of the adsorbents such as the specific surface area or the microporous volume. This points out that the adsorption of H₂S is highly specific. In general, 13X and Y sodium zeolites seem to be the most effective adsorbents, but at lowest tested pressures, near the concentrations found at museums, a pillared clay prepared from a Wyoming montmorillonite seems to be more efficient.     

ZSM-5分子筛吸附分离对二乙苯的研究

本文用动态法就对二乙苯在ＺＳＭ－５分子筛上的吸附进行了研究，考察了温度、脉冲进料量、解吸剂的流速、解吸剂的性质等对分离效果的影响，确定了最佳操作条件：温度为２００℃～２３０℃，常压，以甲苯为解吸剂，解吸剂流量 ２５０～３５０Ｋｇ／ｍ２·ｈ，对二乙苯的单程收率为 ６０％，纯度＞９５％。     

Use of FTIR spectroscopy in the investigation of catalytic reactions in zeolites—Possibilities and limitations

FTIR-spectroscopic investigations of catalytic reactions yield detailed information about the interaction of adsorbed molecules with the catalyst and kinetic data of the surface reaction, if the participating molecules show vibrations whose position and intensity in the IR-spectrum depend on the sorption state and the quantity adsorbed. In this paper, the possibilities and limitations of the method are represented by two examples.     

分子筛表面酸性与液相合成乙酸丁酯催化活性的关联

本文用Ｈｓｍｍｅｔｔ指示剂正丁胺滴定法测定ＨＺＳＭ－５分子筛表面酸量按强度的分布并与液相合成乙酸丁酯的催化活性相关联，探明了分子筛催化剂中酸强度为－５．６＜Ｈ０≤－３．０和－３．０＜Ｈ０≤＋３．３范围的酸中心对催化反应的贡献分别为４８％和３３％。将表面酸量按其对反应的贡献折算成有效酸浓度以后，反应的有效酸浓度和反应速度常数之间符合均相酸催化反应的规律，对以ＨＺＳＭ－５分子筛为催化剂在１２０℃下液相     

Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.     

水蒸气处理对P-ZSM-5催化性能的影响

在不同温度下,用水蒸气对P-ZSM-5催化剂进行了处理,利用XRD、NH3-TPD、比表面和孔径物理吸附仪等手段对催化剂进行了表征,研究了水蒸气处理对P-ZSM-5催化1-丁烯裂解反应性能的影响.实验结果表明:P-ZSM-5催化剂具有良好的水热稳定性;合适的水蒸气处理,有利于催化剂孔容和孔径的增加;水蒸气处理降低了P-ZSM-5催化剂的酸量和酸强度,明显提高了丁烯裂解生成丙烯的选择性、收率和催化剂的抗积炭性能.最佳的水蒸气处理温度为580℃,P-ZSM-5催化剂催化1-丁烯裂解反应的丙烯选择性为39.4%,收率为34.2%.     

甲胺在择形分子筛催化剂上的选择性合成

考察了同晶置换改性丝光沸石和金属表面活性改性ＨＺＳＭ－５对甲醇胺化反应的催化性能，发现两种改性方法都可以降低三甲胺（ＴＭＡ）选择性，提高一甲胺（ＭＭＡ）与二甲胺（ＤＭＡ）的选择性，两种方法都是通过分子筛外表面改性以实现择形性调变的，同晶置换改性可使丝光沸石的强酸性发生显著变化，而强Ｂ酸中心是丝光沸石催化胺化反应的活性中心。     

碱金属改性Y分子筛的甲苯氧化甲基化反应性能及基酸碱性质

碱金属改性Ｙ分子筛的甲苯氧化甲基化反应性能及其酸碱性质＊周灵萍李伟苏明李赫口亘陶克毅＊＊（南开大学化学系，天津３０００７１）关键词Ｙ型分子筛，甲苯，甲烷，氧化甲基化，苯乙烯，乙苯，酸性，碱性分类号Ｏ６４３／ＴＱ４２苯乙烯和乙苯是重要的化工原料．以往合...     

杂原子钛对TiY分子筛性能的影响

采用水热晶化法合成了含骨架杂原子的TiY分子筛，通过X射线粉末衍射（XRD）、傅里叶变换红外光谱(FT-IR)、差示扫描量热、吡啶吸附红外光谱等方法考察了杂原子Ti进入Y分子筛骨架后对分子筛各项性能的影响。结果表明，TiY分子筛具有典型的Y型分子筛晶体结构；随着Ti添加量的增加，TiY分子筛晶化所需的时间延长，晶胞常数增大，分子筛的热稳定性和水热稳定性均有所增强。与Y分子筛相比， TiY分子筛的L酸中心数量明显增加，同时B酸中心强度增加，TiY分子筛的裂化反应活性提高，催化剂上的积炭量明显减少。     

加氢处理催化剂载体中Y型分子筛组分对催化剂表面性质和催化性能的影响

应用ＸＲＤ，ＸＰＳ，ＩＲ－ＴＰＤ，ＣＯ２和ＮＯ吸附及正庚烷裂解和噻吩加氢脱硫脉冲微反等方法，研究了加氢处理催化剂载体经Ｙ型分子筛改性前后各种性质的变化，结果表明，载体经Ｙ型分子筛改性后，催化剂的Ｂ酸、正庚烷裂解活性和异构选择性明显提高，Ｙ型分子筛以分散的形式分布于γ－Ａｌ２Ｏ３表面，减少了载体表面的空位铝，该催化剂中有盯当一部分金属组分进入Ｙ型分子筛孔道与３其Ｂ酸位作用，与ＮｉＱ／γＡｌ２Ｏ３相比