Aromatization of Hantzsch 1,4-Dihydropyridines with Al(NO3)3·9H2O and/or Fe(NO3)3·9H2O in the Presence of Silica Sulfuric Acid Under Mild and Heterogeneous Conditions

A simple and convenient method for the aromatization of Hantzsch 1,4-dihydropyridines to the corresponding pyridines is achieved via combination of aluminum or ferric nitrates and silica sulfuric acid as environmentally friendly and novel oxidizing media. This oxidation was carried out in dichloromethane under heterogeneous conditions with good to excellent yields.     

Triton-B-Catalyzed,Efficient, One-Pot Synthesis of Dithiocarbazates Through Alcoholic Tosylates

A quick, efficient, one-pot synthesis of dithiocarbazates was accomplished in high yields by the reaction of various tosylates of primary, secondary, and tertiary alcohols with a variety of substituted hydrazines using the benzyl–trimethylammonium hydroxide (Triton-B)/CS₂ system. The reaction conditions are mild with simpler workup procedures than the reported methods.     

Ferric(III) Nitrate Supported on Kieselguhr: A New Reagent for Selective Oxidation of Alcohols

A selective and effective oxidation of alcohols into the corresponding aldehydes and ketones, respectively, with a new reagent, ferric(III) nitrate supported on kieselguhr, under heterogeneous conditions is reported.     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

Total and inorganic mercury determination in fish tissue by flow injection cold vapour atomic fluorescence spectrometry

A simple and reliable method for Hg determination in fish samples has been developed. Lyophilised fish tissue samples were extracted in a 25% (w/v) tetramethylammonium hydroxide (TMAH) solution; the extracts were then analysed by FI-CVAFS. This method can be used to determine total and inorganic Hg, using the same FI manifold. For total Hg determination, a 0.1% (w/v) KMnO₄ solution was added to the FI manifold at the sample zone, followed by the addition of a 0.5% (w/v) SnCl₂ solution, whereas inorganic Hg was determined by adding a 0.1% (w/v) L-cysteine solution followed by a 1.0% (w/v) SnCl₂ solution to the FI system. The organic fraction was determined as the difference between total and inorganic Hg. Sample preparation, reagent consumption and parameters that can influence the FI-CVAFS performance were also evaluated. The limit of detection for this method is 3.7 ng g^?1 for total Hg and 4.3 ng g^?1 for inorganic Hg. The relative standard deviation for a 1.0 µg L^?1 CH₃Hg standard solution (n = 20) was 1.1%, and 1.3% for a 1.0 µg L^–1 Hg²⁺ standard solution (n = 20). Accuracy was assessed by the analysis of Certified Reference Material (dogfish: DORM-2, NRCC). Recoveries of 99.1% for total Hg and 93.9% inorganic Hg were obtained. Mercury losses were not observed when sample solutions were re-analysed after a seven day period of storage at 4°C.     

六水合三氯化铁催化3-甲基环己酮与丙酮酸乙酯交叉羟醛缩合制备薄荷内酯

用FeCl3·6H2O催化3-甲基环己酮与丙酮酸乙酯交叉羟醛缩合,制得2-(2-氧代-4-甲基环己叉基)丙酸乙酯和7a-羟基薄荷内酯,皂化后用硼氢化钠还原、酸化制得(±)-薄荷内酯,产率为51%。考察了3-甲基环己酮的烯醇式异构化的位置选择性和粗产物中(±)-薄荷内酯与(±)-异薄荷内酯异构体的比例。     

Hydrogen storage over alkali metal hydride and alkali metal hydroxide composites

Alkali metal hydroxide and hydride composite systems contain both protic(H bonded with O) and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals,i.e.,-23 kJ/molH2 for LiOH-LiH, 55.34 kJ/molH2 for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molH2, and the corresponding entropy was ca. 101.23 J/(molH2 K), so the temperature for releasing 1.0 bar H2 was as high as 518℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be57.87 kJ/mol, showing good kinetic properties.     

促进学生化学学科核心素养发展的“铁盐和亚铁盐”的单元教学

设计了“铁盐和亚铁盐”的单元教学,以“探究硫酸亚铁的性质”和“线路板腐蚀液的研究”为核心任务,把铁盐与亚铁盐的性质、Fe²⁺和Fe³⁺的相互转化等核心知识贯穿其中,建立从物质类别、元素价态视角研究物质性质及转化的思路方法,促进多维度化学学科核心素养的融合发展。经过多轮次教学改进,结合教学实践过程及其教学效果抽提出“注重应用无机物的认识模型,重点把握研究物质性质的角度和思路”“抓住典型活动,培养学生的关键能力”“设计开放性任务,通过有效的师生对话进行诊断,外显问题解决思路”等教学策略。     

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.