配位-沉淀法制备Ni(OH)2和NiO超微粉

本工作采用配位 -沉淀法成功的制备了薄片形氢氧化镍和氧化镍超微粉末 ,通过 XRD、TG-DTA、IR及 TEM等实验手段对超微粉的组成结构进行分析表征。     

Effects of polystyrene-encapsulated magnesium hydroxide on rheological and flame-retarding properties of HIPS composites

In this study, polystyrene (PS)-encapsulated magnesium hydroxide (Mg(OH)₂) was successfully prepared by in situ polymerization of styrene on the surface of Mg(OH)₂ in a high-speed mixer. A large amount of PS chemically bonded on Mg(OH)₂ surface was confirmed by means of FT-IR, TGA and SEM. A series of composites of high impact polystyrene (HIPS) were prepared by melt blending in a co-rotating twin-screw extruder. The effects of PS-encapsulated filler on the properties of HIPS composites were studied by SEM, rheology and combustion tests (horizontal burning tests and cone calorimetry). The dispersion and adhesion patterns of PS-encapsulated Mg(OH)₂ in HIPS matrix were investigated through FT-IR and SEM. The experimental results demonstrated that comparing to the composites containing untreated filler, the rheological and flame retardant properties of those containing PS-encapsulated filler were found to be significantly improved. This improvement is mostly attributed to a better dispersion of the encapsulated filler and a strong adhesion between the filler and matrix.     

Lu2O3对球形Ni(OH)2高温充放电性能的影响

为了改善镍电极的高温充电效率，采用机械混合的方式将球形Ni(OH)2与不同比例的Lu2O3混合后制成粘结式镍正极。充放电测试、循环伏安和XRD等实验结果表明，掺杂Lu2O3后镍电极的析氧过电位明显提高，高温充电效率得到了很大改善，在充电后的电极中β-NiOOH生成；而且Lu2O3的掺杂比例对镍电极的高温性能在不同的充放电倍率下有不同程度的影响，3．5％是最好的掺杂比例，掺杂对高温小电流充电效率的改善作用要大于高温大电流充电。     

Morphology-controlled nonaqueous synthesis of anisotropic lanthanum hydroxide nanoparticles

The preparation of lanthanum hydroxide and manganese oxide nanoparticles is presented, based on a nonaqueous sol-gel process involving the reaction of La(OiPr)₃ and KMnO₄ with organic solvents such as benzyl alcohol, 2-butanone and a 1:1 vol. mixture thereof. The lanthanum manganese oxide system is highly complex and surprising results with respect to product composition and morphology were obtained. In dependence of the reaction parameters, the La(OH)₃ nanoparticles undergo a shape transformation from short nanorods with an average aspect ratio of 2.1 to micron-sized nanofibers (average aspect ratio is more than 59.5). Although not directly involved, KMnO₄ plays a crucial role in determining the particle morphology of La(OH)₃. The reason lies in the fact that KMnO₄ is able to oxidize the benzyl alcohol to benzoic acid, which presumably induces the anisotropic particle growth in [0 0 1] direction upon preferential coordination to the ±(1 0 0), ±(0 1 0) and ±(−110) crystal facets. By adjusting the molar La(OiPr)₃-to-KMnO₄ ratio as well as by using the appropriate solvent mixture it is possible to tailor the morphology, phase purity and microstructure of the La(OH)₃ nanoparticles. Postsynthetic thermal treatment of the sample containing La(OH)₃ nanofibers and β-MnOOH nanoparticles at the temperature of 800 °C for 8 h yielded polyhedral LaMnO₃ and worm-like La₂O₃ nanoparticles as final products.     

Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Convenient procedure of Horner-Wadsworth-Emmons olefination for the synthesis of simple and functionalized α,β-unsaturated nitriles

A mild and practical procedure of Horner-Wadsworth-Emmons olefination promoted by lithium hydroxide and α-cyano phosphonates has been set up for the synthesis of α,β-unsaturated nitriles. The reaction conditions are tolerated by functionalized ketones and the exclusive formation of E-γ-hydroxy α,β-unsaturated nitriles has been observed.     

超声波处理对球形β-Ni(OH)2结构及电化学性能的影响

A method of ultrasonic treatment （UST） was first used to modify the structure and electrochemical performance of nickel hydroxide for the active material of nickel series alkaline batteries. The experimental results showed that UST was an effective method to improve the electrochemical performance of β-Ni（OH）2 such as specific discharge capacity, discharge potential, electrochemical reversibility and oxygen evolution over-potential. The results of electrochemical impedance spectroscopy, powder X-ray diffraction and particle size distribution indicated that the improvement of the performance of β-Ni（OH）2 through UST was attributed to the reduction of the charge-transfer resistance （Rt） and the diffusion impedance （Zw）, which resulted from the decrease of the crystallite and particle size and the increase of interlayer spacing. Diffusion coefficient of proton DH of ultrasonic treated β-Ni（OH）2 gained by CV tests was 1.13 × 10^-11 cm^2/s, and the average discharge specific capacity of ultrasonic treated β-Ni（OH）2 electrode was 301 mAh/g.     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.     

Polyol-Metall-Komplexe. 25. rac-Mannose,rac-Arabit und L-Threit als deprotonierte Liganden in Ferraten(III)

Polyol Metal Complexes. 25. rac-Mannose, rac-Arabitol and L -Threitol as Deprotonated Ligands in Ferrates(III ) Ba₂[Fe₂(β-rac-ManfH_?5)₂] · 12H₂O ( 1 ), Sr₄[Fe₄(rac-Arab1,2,3,5H_?4)₄(OH)₂]CO₃ · 33 H₂O ( 2 ), and Ba₂[Fe₂(L-ThreH_?4)₂(OH)₂] · 12.5 H₂O ( 3 ) (Man = mannose, Arab = arabitol, Thre = threitol) have been crystallized from alkaline aqueous solution. Crystal structure analysis revealed dinuclear ferrate(III ) ions for 1 and 3 , the former being a C_i-symmetrical homoleptic ferric complex with pentadentate pentaanions derived from racemic β-mannofuranose. In 3 , besides tetradentate L -threitolato ligands, there is one terminal hydroxo ligand at each ferric center. Hydroxo ligands are also present in the C_i-symmetrical hexaanions of 2 , which are tetranuclear planar entities built up from four edge-sharing FeO₆ octahedra. However arabitol is a pentitol, the tetraanionic ligands are only tetradentate for steric reasons.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.