TiO2 nanotube arrays prepared by anodization as an adsorbent in micro‐solid‐phase extraction to preconcentrate and determine nitrogen‐containing polycyclic aromatic hydrocarbons in water samples

In this study, a simultaneous determination method for nitrogen‐containing polycyclic aromatic hydrocarbons including 7‐methylquinoline, acridine, 5,6‐benzoquinoline, carbazole, and 9‐methylcarbazole was developed. This method is based on a micro‐solid phase extraction using TiO₂ nanotube arrays as an adsorbent in combination with HPLC. Some factors that had an effect on the enrichment were optimized, such as sample pH, surfactant concentration, ion strength, type of eluent, equilibrium time, and desorption time. Under the optimized conditions, the linear ranges and LODs were in the range of 0.01–100 and 0.0035–0.81 μg/L, respectively. The precisions of the proposed method were <9.51% (RSD, n = 6). The developed method was validated with four real samples, and the spiked recoveries were in the range of 77–109.6%. All these results demonstrated that this novel micro‐solid‐phase extraction technique was a reliable alternative to conventional preconcentration method for the extraction and analysis of such nitrogen‐containing polycyclic aromatic hydrocarbons in complex samples.     

Miniaturized molecularly imprinted polymer extraction method for the gas chromatographic analysis of flavonoids

In this study, the use of monolithic molecularly imprinted polymers in a micropipette tip format allowing the simple and fast extraction of flavonoids from standard solutions and a black tea sample is demonstrated. The imprinted polymer employed quercetin, methacrylic acid or 4‐vinylpyridine, and ethylene glycol dimethacrylate as template, functional monomer, and cross‐linker, respectively. Surface morphologies of the quercetin‐imprinted polymers and the corresponding nonimprinted polymers were characterized by SEM. Extraction of flavonoid standards was performed to evaluate the selectivity and recovery with these imprinted and nonimprinted polymers. Flavonoid compositions in aliquots eluted from the tips were identified using fast GC with flame ionization detection. Maximum specific capacities of 0.2, 5.7, and 16.0 mg/g for catechin, morin, and quercetin, respectively, were obtained with the imprinted polymer prepared with methacrylic acid, with the corresponding recoveries of 99.8, 98.8, and 95.4%, respectively. Efficient extraction by the quercetin‐imprinted polymer of epicatechin, catechin, and quercetin from an apple‐flavored black tea sample was achieved, with GC–MS employed for compound identification for both the tea and extracted samples.     

Multiresidue determination of UV filters in water samples by solid‐phase extraction and liquid chromatography with tandem mass spectrometry analysis

UV filters, contained in sunscreens and other cosmetic products, as well as in some plastics and industrial products, are nowadays considered contaminants of emerging concern because their widespread and increasing use has lead to their presence in the environment. Furthermore, some UV filters are suspected to have endocrine disruption activity. In the present work, we developed an analytical method based on liquid chromatography with tandem mass spectrometry for the determination of UV filters in tap and lake waters. Sixteen UV filters were extracted from water samples by solid‐phase extraction employing graphitized carbon black as adsorbent material. Handling 200 mL of water sample, satisfactory recoveries were obtained for almost all the analytes. The limits of detection and quantification of the method were comparable to those reported in other works, and ranged between 0.7–3.5 and 1.9–11.8 ng/L, respectively; however in our case the number of investigated compounds was larger. The major encountered problem in method development was to identify the background contamination sources and reduce their contribution. UV filters were not detected in tap water samples, whereas the analyses conducted on samples collected from three different lakes showed that the swimming areas are most subject to UV filter contamination.     

A useful approach for the differentiation of wines according to geographical origin based on global volatile patterns

In this study, the feasibility of solid‐phase extraction combined with gas chromatography and mass spectrometry in tandem with partial least squares discriminant analysis was evaluated as a useful strategy to differentiate wines according to geographical origin (Azores, Canary and Madeira Islands) and types (white, red and fortified wine) based on their global volatile patterns. For this purpose, 34 monovarietal wines from these three wine grape‐growing regions were investigated, combining the high throughput extraction efficiency of the solid‐phase extraction procedure with the separation and identification ability. The partial least squares discriminant analysis results suggested that Madeira wines could be clearly discriminated from Azores and Canary wines. Madeira wines are mainly characterized by 2‐ethylhexan‐1‐ol, 3,5,5‐trimethylhexan‐1‐ol, ethyl 2‐methylbutanoate, ethyl dl ‐2‐hydroxycaproate, decanoic acid, 3‐methylbutanoic acid, and (E)‐whiskey lactone, whereas 3‐ethoxypropan‐1‐ol, 1‐octen‐3‐ol, (Z)‐3‐hexenyl butanoate, 4‐(methylthio)‐1‐butanol, ethyl 3‐hydroxybutanoate, isoamyl lactate, 4‐methylphenol, γ‐octalactone and 4‐(methylthio)‐1‐butanol, are mainly associated with Azores and Canary wines. The data obtained in this study revealed that solid‐phase extraction combined with gas chromatography and quadrupole mass spectrometry data and partial least squares discriminant analysis provides a suitable tool to discriminate wines, both in terms of geographical origin as well as wine type and vintage.     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.     

Evaluation of alternative solvents for improvement of oil extraction from rapeseeds

This present study was designed to evaluate the performances of five alternative solvents (alcohols: ethanol, isopropanol and terpenes: d-limonene, α-pinene, p-cymene) compared to n-hexane in rapeseed oil extraction. The extracted oils were quantitatively and qualitatively analyzed to compare the solvents’ performances in terms of kinetics, fatty acid compositions, lipid yields, and classes. Moreover, micronutrients in extracted oils were also respectively quantified by high-performance liquid chromatography (HPLC) and gas chromatography (GC). In addition, the interactions between alternative solvents and rapeseed oil have been theoretically studied with the Hansen solubility methodology to get a better comprehension of dissolving mechanisms. The results indicated that p-cymene could be the most promising solvent for n-hexane substitution with higher lipid yield and good selectivity, despite the micronutrient contents were relatively low.     

Model-based equipment-design for plant-based extraction processes – considering botanic and thermodynamic aspects

The growing demand for plant-based products in the food, cosmetics and pharmaceutical industry leads to the need for a systematic process and equipment-design for the potentially applicable extraction techniques. Therefore, in this article, the classification of plant-based raw materials according to their characteristics is discussed. Furthermore, physicochemical modelling via distributed plug flow approach is applied and its possible fields of application are examined. Here, especially the extraction of water from the plant-based raw material as well as the entailed effects on the equilibrium and the mass transport kinetics are concerned. In addition to that, an evaluation method for the examined and generally available equipment through spider diagram is proposed. The relation to the initially argued botanic systems is discussed in particular. The extraction of vanillin from vanilla beans serves as exemplary system for this.     

Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

Extraction of coal-tar pitch using NMP/ILs mixed solvents

Coal-tar pitch(CP)is a promising carbon raw material for producing needle coke,carbon fiber etc.During processing,the H/C ratio,ash content,and quinoline insoluble(QI)in the CP are the key factors that influence the material preparation.In this study,NMP was selected to extract CP first;then[BMIM]Cl/NMP mixed solvent was used;and finally a series of ionic liquids(ILs)mixtures with NMP were developed for the extraction of CP to obtain the refined pitch.The extracts were analyzed via elemental analysis,TGA,FT-IR,and 13C-NMR.Results indicate that different NMP/IL mass ratios or different kinds of ILs have impact on the extraction yield.The relationship of the hydrogen to carbon(H/C)ratio changed with different solvents and QI extracts were obtained.Results showed that the H/C ratios changed little between NMP extracts and could be adjusted by changing the NMP/ILs mass ratio or using different ILs.The extracts are suitable for preparation mesophase pitch because of no ash content,low QI,and appropriate H/C ratios.As a result,NMP can be used to refine pitch.In addition,[BMIM]Cl is good mixed with NMP for CP extraction,because it can obtain a relatively high yield under the same extraction conditions.     

Flame atomic absorption spectrometry determination of trace amount of gold after separation and preconcentration onto ion-exchange polyethylenimine coated on Al2O3

The object of this work is to develop a simple and selective method for efficient extraction of Au(III) ions in aqueous solution using a new solid-phase extraction sorbent. Polyethylenimine (PEI) ion-exchange polymer was coated on alumina in the presence of NaNO₃. The method is based on sorption of Au³⁺ ions on 50 mg PEI/Al₂O₃. A solution of 0.5 M thiourea, then 1.0 M HCl effectively eluted the gold ion and then aspirated into flame atomic absorption spectroscopy (FAAS). The influence of flow rate of sample solution and eluent, the pH effect, eluent type and sorption capacity was investigated. The effects of various diverse ions for preconcentration and separation of the gold ion were investigated. Relative standard deviation of 4.0 μg mL⁻¹ of gold was 1.46% (n = 10). The detection limit was 26.2 ng L⁻¹ in original solution. The method has been applied successfully for the recovery of trace amount of Au(III) ions from water samples.