On the concept of point value in the infinite-dimensional realization theory

In this article, we study the effect of the chosen representation of a point value (and point evaluation) on the class of periodic signals realizable using a certain type of infinite-dimensional linear system. By suitably representing the point evaluation at the origin in a Hilbert space, we are able to give a complete characterization of its extensions. These extensions involve a new concept called δ-sequence, the use of which as an observation operator of an infinite-dimensional linear system is studied in this article. In particular, we consider their use in the realization of periodic signals. We also investigate how the use of δ-sequences affects the convergence properties of such realizations; we consider the rate and character of convergence and the removal of the Gibbs phenomenon. As still a further demonstration of the significance of the chosen concept of a point value, we discuss the use of distributional point values in the realization of periodic distributions. The possible applications of this work lie in regulator problems of infinite-dimensional control theory, as is indicated by the well-known internal model principle.     

有向全图的幂敛指数和周期

设G是有向图,T(G)表示G的有向全图.本文得到了它们的幂敛指数k(G)和k(T)之间的关系:对任何有向图G,周期p(T(G))=1;当G是本原图时,k(T)≤k(G)+1,文中给出了取得k(G)+1的两类图;当G是无圈图时,k(T)=2k(G)-1,当G是有向圈时,k(T)=2|V(G)|-1,当G是强连通时得到了k(T)的一些估计.     

On Two Theorems of Finite Solvable Groups

For a finite group G, let T（G） denote a set of primes such that a prime p belongs to T（G） if and only if p is a divisor of the index of some maximal subgroup of G. It is proved that if G satisfies any one of the following conditions： （1） G has a p-complement for each p∈T（G）; （2）│T（G）│= 2： （3） the normalizer of a Sylow p-subgroup of G has prime power index for each odd prime p∈T（G）; then G either is solvable or G/Sol（G）≌PSL（2, 7） where Sol（G） is the largest solvable normal subgroup of G.     

Applications of electronic speckle interferometry (ESI) techniques for spacecraft structural components

Laser-based electronic speckle interferometry (ESI) techniques, viz., electronic speckle pattern interferometry (ESPI) and electronic speckle shearographic interferometry (ESSI) are used for testing of spacecraft structural components. The combined ESPI and ESSI system developed in house was successfully used for the non-destructive evaluation (NDE) of honeycomb sandwich panels and propellant tanks of Indian Space Research Organization (ISRO). Debonds between face sheet and the honeycomb core were identified using (i) thermal and (ii) dual vacuum stressing methods. On-line NDE of the propellant tanks under internal pressure loading for identification of the minute cracks and thickness reduction areas were successfully implemented by ESI.     

Structure–electrical property study of anisotropic polyaniline films

The relationships of the structure and electrical properties of anisotropic HCl‐doped polyaniline (PANI) films cast from N,N′‐dimethylpropylene urea (DMPU) solutions and stretched to different draw ratios were studied. The anisotropic structure of the stretched PANI films was examined by X‐ray diffraction, near‐infrared wave‐guide coupling, and polarized infrared measurements. The PANI emeraldine base (EB) films cast from DMPU solutions had a single‐phase noncrystalline structure, and stretching of the films did not cause crystallization to occur. The transition moment angles of two weakly absorbing infrared bands were determined, and the Hermans' orientation functions for the PANI EB films were calculated. The PANI films were then doped with HCl, and the electrical properties were determined by impedance spectroscopy. With a specially designed test fixture, the in‐plane and through‐plane impedance was obtained. The conductivity along the stretch direction increased with orientation. The in‐plane conductivity was significantly higher than the through‐plane conductivity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 823–841, 2003     

Effect of gamma irradiation with or without hot water dip and transportation from Thailand to Canada on nutritional qualities, ripening index and sensorial characteristics of Thai mangoes (Nahng Glahng Wahn variety)

Two lots of mangoes of the Nahng Glahng Wahn variety from Thailand were irradiated at the Thai Irradiation Center (TIC) at 0.49 to 0.77 kGy. Following this, one batch was retained in Thailand while the other was shipped to the Canadian Irradiation Center (CIC) for investigation of the same variables during storage. This way, it was hoped to compare the effects of gamma radiation with hot water dip (HWI) or without (I) before and after transportation on the ripening, vitamin C and vitamin A content and sensory qualities of mangoes. The results indicate that the I and HWI treatments delayed the ripening of the mangoes. The irradiated groups appeared to have a slightly higher content of ascorbic acid on the first day after irradiation than their corresponding controls. The sensory evaluation indicates that the panelists mostly favoured the I and HWI irradiated groups for the overall appearance and texture of whole mangoes and pulp and in taste and palatability of the pulp alone. Transportation stress did not appear to have much of an effect on the ascorbic acid and dehydroascorbic acid levels and the sensorial tests. The mangoes stored and studied in Canada appeared to have a lower vitamin A content.     

聚合物分散液晶光栅的衍射特性的研究

报道了一种由聚合物分散液晶膜与具有周期性条状电极结构板结合的新型光栅器件，借助于聚合物分散液晶膜的电光特性，这种栅对入射光的散射或衍射取决于对其施加的电压，即它是电场可调的，实验结果显示出当驱动电压超过器件器件阈值电压时，衍射光的强度和衍射斑的可见级次被电场调制，而且它能入射光的线性偏振态变为椭圆偏振态。     

一类非线性算子方程的多重正解及其应用

本文利用不动点指数理论对一类非线性算子方程建立了多重正解的存在性定理，并将所获结果应用到Ｈａｍｍｅｒｓｔｅｉｎ积分方程和Ｓｔｕｒｍ Ｌｉｏｕｖｉｌｅ两点边值问题，得到了新的结论，本质上改进和推广了［２，４，５，６，８－１２］的工作．     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002