Synthesis on the basis of electrogenerated carbenes

A series ofS _N2 reactions with halomethanes as substrates and the corresponding anions as nucleophiles were studied by the semiempirical MNDO and AM1 methods, taking into account solvent effects. Analysis of the kinetics, structures of reagents, intermediates and products, and charge distribution in them allows one to draw the conclusion that the retardation ofS _N2 reactions is stronger in solvents than in the gas phase, and the rates of reactions involving anions with a lower number of halogen atoms are higher.For Part 8 see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2148–2154, November, 1995.This work was partially financially supported by the International Science Foundation (Grant No. MHYOO).     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.     

Synthesis and Structural Characterization of a New Cadmium(Ⅱ) Complex Bridged by Endo-norbornene-cis-5,6-dicarboxylic Acid

A polynuclear complex [Cd(endc)(H2O)]n·nH2O (endc = endo-norbomene-cis5,6-dicarboxylate anion) has been synthesized by the hydrothermal reaction of cadmium nitrate tetrahydrate with endo-norbomene-cis-5,6-dicarboxylic acid in 1:1 molar ratio,and structurally characterized by single-crystal X-ray diffraction.It crystallizes in monoclinic,space group P21/c with a = 1.16471(7),b = 0.95334(7),c = 0.91109(9) nm,Z = 4,V= 1.01035(14)nm3,Dc.= 2.160 g/cm3,μ= 2.172 mm-1,F(000) = 648,R =0.0302 and wR = 0.0752.According to structural analysis,each Cd(Ⅱ) ion is coordinated to six O atoms from three endc anions and one water molecule,giving a distorted octahedral geometry.Two- dimensional layer arrangement of the title complex is constructed from the bridging nature of endc.It is worth notice that adjacent two-dimensional layers are joined together to form a three-dimensional supramolecular framework via intermolecular hydrogen bonding interactions.     

Nickel-Ruthenium Mixed-Metal Carbonyl Clusters Syntheses and Solid State Structures of the Two Tetrahedral Clusters [PPh4][NiRu3(μ3 H)(CO)9(μ-CO)3] and [NEt4]2[NiRu3(CO)8(μ-CO)4]

Redox condensation of [Ru₃H(CO)₁₁]- with Ni(CO)₄, in tetrahydrofuran solution, under a nitrogen atmosphere, yields the tetranuclear anion [NiRu_H(CO)₁₁)-. Subsequent deprotonation with Bu'OK in acetonitrile solution leads to the formation of the related dianion. Both anions have been characterized by spectroscopic techniques, elemental analysis and single crystal X-ray diffraction. [PPh₄][NiRu₃H(CO)₁₂] crystallizes in the triclinic space group PI with unit cell dimensionsof a = 11.842(2) Å,b = 12.335(3) Å, c = 13.3080) Å,a = 91.89(2)°, = 93.35(1)°,y = 96.41(2)°, Z = 2, V= 1926.9(7) Å'. The NiRu₃, metal core of the molecule defines a distorted tetrahedron with nine terminal and three edge bridging carbonyl groups. The hydrido ligand was located by difference Fourier techniques and was found to bridge the NiRu₂ basal triangle at a distance of 0.88(6) A from this plane. Selected average distances and angles are: Ru-Ru = 2.839 Å, Ru-Ni = 2.640 Å, Ru-C, = 1.910 A,Ru-C _b = 2.084 Å, Ni-C _b = 2.022 Å, Ru-H = 1.77 Å, C-0, = 1.135 Å, C-O _b = 1.159 Å, M-C-O, = 176.3°,M-C--O _b = 139.3°;other distances are: Ni-C₁ = l.758(7) Å, Ni-H= 1.85(7) Å. [NEt₄]₂[NiRu₃(CO)₁₂] crystallizes in the orthorhombic space group Pnma (no. 62) with unit cell dimensions ofa=20.247(5) Å,b = 15.038(4)Å,c = 12.079(3) Å, Z=4, V=3678(2) A'. The molecule contains a tetrahedral NiRu₃ core with eight terminal and four edge bridging carbon monoxide groups which bridge the three Ni-Ru and one Ru-Ru bond. Average distances and angles are: Ru -Ru =2.3050A Ru-Ni 2.648 Å, Ru-C _t = 1.878 Å, Ru-C _b 2.045 Å, Ni-C _b = 2.055 Å, C-O _t = 1.145 Å, C-01,=1.157 Å, M-C-O,= 176.9°, M-C-O _b = 138.6°; other distance is: Ni-C _t = 1.754(10) Å,t = terminal,b = bridging.     

Analysis of metabolites of glucose pathways in human erythrocytes by analytical isotachophoresis

A method for the quantitative determination of the major anionic constituents of fountain solutions, typically mono-, di- and hydroxycarboxylates, alkylbenzenesulfonates, and inorganic anions, including orthophosphate and polyphosphates, is presented here for the first time. The analytical problems arising from extensive co-elution of many of these analytes on an ion-exchange column have been resolved through a combination of (i) careful selection of the concentration gradient of the sodium hydroxide eluent; (ii) parallel analysis by ion-exclusion chromatography; and (iii) determination of total phosphorus by inductively coupled plasma atomic emission spectrometry.     

Radical anions of nitrobenzothiazoles: EPR study of conjugative properties of benzothiazolyl systems

The electrochemical reduction in DMSO of the five isomers of nitrobenzothiazole (NBTZ) gave quite persistent radical anions that could be easily characterised by EPR spectroscopy. By contrast, the chemical reduction in alkaline solution, that is by t-BuOK in DMSO or by glucose and MeOK in MeOH, presented some problems with 6- and 4-NBTZ, and in the case of 2-NBTZ did not provide any detectable paramagnetic species. The internal consistency of coupling constants of the nitrobenzothiazole radical anions is in good agreement with the conjugative properties of the various benzothiazolyl systems and allows rectifying a recent EPR characterisation of 6-NBTZ radical anion.     

Synthesis and Crystal Structure of a Cadmium Coordination Polymer with Dicyanamide and 1,2-Bis（1,2,4-triazol- 1-yl）ethane

The new cadmium(II) coordination polymer [Cd(bte)2(dca)2]n 1 (bte = 1,2-bis(1,2,4- triazol-1-yl)ethane, dca = dicyanamide) was synthesized and characterized by single-crystal X-ray diffraction. The crystal is of monoclinic, space group P21/n with a = 8.7148(15), b = 8.6142(17), c = 15.204(3) A, β = 92.100(10)o, V = 1140.6(4) A3, Z = 2, Mr = 572.87, Dc = 1.668 g/cm3, F(000) = 572, μ = 1.004 mm-1, the final R = 0.0654 and wR = 0.1429 for 1737 observed reflections (I > 2σ(I)). The cadmium atom is coordinated equatorially by four nitrogen atoms from four bte ligands and axially by two nitrogen atoms from two dca anions to adopt a distorted octahedral geometry. Each bte molecule bridges two cadmium(II) atoms. Two strands of bte molecules are wrapped around each other, and held together by cadmium(II) atoms. 1 Forms a double chain structure containing eighteen-membered Cd2(bte)2 rings.     

Carbonat-isostere Anionen [SnX3]5− in den Verbindungen Rb6[SnX3]O0,5 und Cs6[SnX3]O0,5 mit X = As,Sb und Bi

Carbonate Isostructural Anions [SnX₃]^5? in the Compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi The metallic shining compounds Rb₆[SnX₃]O_0.5 and Cs₆[SnX₃]O_0.5 with X = As, Sb, and Bi were prepared from the melt starting from adequate mixtures of the elements and SnO₂. They crystallize in the hexagonal system (space group P6₃/mmc, No. 194, Z = 2) with the lattice constants mentioned in ?Inhaltsübersicht”?. In the structures of the isotypic compounds tin and the main group(V) elements build up trigonal planar anions [SnX₃]^5? with X = As, Sb, and Bi isostructural to the carbonate anion, oxygen forms isolated O^2? ions. The bond lengths Sn? X are significantly shortened with respect to the sums of Pauling covalent radii. The atoms of the units [SnX₃]^5? are coordinated by alkali metal cations forming trigonal prisms and the O^2? anions occupy octahedral holes.     

Kinetics of the Formation of Goethite in the Presence of Sulfates and Chlorides of Monovalent Cations

The synthesis of goethite by oxidation of Fe²⁺in presence of metallic iron was undertaken in an aqueous medium containing indifferent salts such as Na₂SO₄, (NH₄)₂SO₄, NaCl, and NH₄Cl. Temperature and bubbling air rate were maintained, respectively, at 70°C and 1 L/min. The influence of anions and cations on the kinetics of each step of the process has been followed distinctly, the iron dissolution rate has been determined by the variation of the medium acidity, and the precipitation of goethite has been determined by gravimetric measurements. With respect to Cl⁻, the SO₄²⁻anion decreases the rate of the two reactions. NH₄⁺acts as an inhibitor when it is present at low concentrations and as an accelerator for higher concentrations; the limit corresponding to the change of NH₄⁺behavior depends on the nature of the counter ion. The reaction product is composed of pure goethite in the presence of sulfate salts, whereas a mixture of goethite and lepidocrocite, respectively, 60–70 and 40–30%, was observed in the presence of chloride salts.     

Comparison between capillary electrophoresis and ion-chromatography for analysis of inorganic anions

Separation and detection of some selected inorganic anions with capillary electrophoresis are shown. The anions are separated in microbore capillaries (25 m* 0.2 m) and detected with a UV-detector. Results are compared with the method of ion exchange chromatography. In consideration of the most important physical and chemical parameters an easy kind of computer simulation for such electropherograms was developed.To get optimal results of separation and UV-detection in capillary electrophoresis some parameters of the device HPE 100, i.e. loading time in the electrokinetic sample injection mode and the running voltage are varied. The behaviour of absorption in the UV region of the chosen anions as well as the influence of pH values in retention behaviour are investigated. There is a simple way to calculate the electrophoretic mobilities from known retention times. Approximate limits of detection for all anions and for each technique are given.