激光清洗实时监测技术研究

针对目前在研激光清洗的实时监测问题进行实验和分析。得出两个结论:激光清洗具有传统方法无法具有的优越性,可以节省大量人力物力成为新型清洗方法而受到重视,激光清洗在设备维修保养中显示了良好的应用前景。激光清洗过程中产生的声发射信号包含了清洗过程的大量信息,利用声发射检测系统可以对激光清洗过程实时监控。     

Removal of graffiti from the mortar by using Q-switched Nd:YAG laser

This paper presents part of the larger study on microstructural features of mortars and it's effects on laser cleaning process. It focuses on the influence of surface roughness, porosity and moisture content of mortars on the removal of graffiti by Nd:YAG laser. The properties of this laser are as follows: wavelength (λ) 1.06 μm, energy: 500 mJ per pulse, pulse duration: 10 ns. The investigation shows that the variation of laser fluence with the number of pulses required for the laser cleaning can be divided into two zones, namely effective zone and ineffective zone. There is a linear relationship observed between number of pulses required for laser cleaning and the laser fluence in the effective zone, while the number of pulses required for the laser cleaning is almost constant even though the laser fluence increases in the ineffective zone. Moreover, surface roughness, porosity and moisture content of mortar samples have influence on the laser cleaning process. The effect of these parameters become however negligible at the high level of laser fluence. The number of pulses required for the laser cleaning is low for smooth surface or less porous mortar. Furthermore, the wetness of the samples facilitates the cleaning process.     

Organic contaminants removal by oxygen ECR plasma

Recently electron cyclotron resonance (ECR) plasma have been explored for wafer cleaning applications, since it is known to do less damage to silicon surface than conventional plasma. Organic contaminants removal efficiency and plasma radiation damage of the ECR plasma cleaning have been investigated. In oxygen ECR plasma cleaning, the plasma exposure time needed to remove the organic contaminants on the silicon surface down to the detection limit is 40 s, but the one to reach the lowest surface roughness is 10 s. The leakage current level of the MOS capacitor made using the Si substrate exposed to oxygen ECR plasma for 40 s is 8 × 10⁻⁹ A. The optimum exposure time determined by considering the contaminants removal efficiency and the plasma radiation damage (or the leakage current level) is 40 s. Organic contaminants seem to be removed through both sputter-off mechanism by oxygen ion bombardment and evaporation mechanism by chemical reactions with excited oxygen atoms.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Organotin concentrations in the Rivers Bure and Yare,Norfolk Broads,England

Butyltin concentrations have been measured at eight freshwater sites (rivers and lakes) in the Norfolk Broads, UK, during 1986 and 1987. Tributyltin (TBT) was found in water samples from seven of the sites. Wherever TBT was present, dibutyltin and (usually) monobutyltin occurred. Levels of TBT exceeded 100 ng dm^?3 in open stretches of both the Rivers Bure and Yare in 1986 and 1987. The highest concentration of TBT recorded for Wroxham Broad (a shallow lake) was 898 ng dm^?3. Values of up to 3.26 μg dm^?3 were measured in water samples taken from a marina. A depth profile for Wroxham Broad showed TBT to be uniformly distributed throughout the shallow water column. The results are discussed in relation to toxicity of TBT to freshwater organisms. Laboratory measurements of the degradation of TBT in freshwater from a marina gave a half-life of six days at 20°C in the light.     

Dynamic optimization of chemical cleaning in dead-end ultra filtration

In this paper a control strategy is formulated that minimizes the costs for a single chemical cleaning of a dead-end ultra filtration membrane. From the process model, the performance index and the constraints it can be derived that dynamic optimization will lead to a ‘maximum effort control problem’, in which the controls (cleaning flow and cleaning agent concentration) are either zero or maximum. The change from maximum to zero is called the switching point. This switching point depends on the overall cleaning time and the requested cleaning effectiveness. From the calculated optimal control strategy it follows that cleaning time can be significantly reduced, compared to conventional cleaning.     

S-烷基异硫脲盐作为硫醇替代物经环氧开环反应合成β-羟基硫化物

S-烷基异硫脲盐作为一种无毒、无味、易于制备的硫醇替代物，在碱性水介质中、室温下与多种环氧化合物发生环氧开环反应，区域选择性、高收率地合成了一系列β-羟基硫化物。     

Determination of organometallic compounds in surface water and sediment samples with SPME-CGC-ICPMS

Organometal compounds of tin, mercury and lead were simultaneously determined in environmental water and sediment samples by CGC-ICPMS. Instead of classical liquid/liquid extractions, solid phase microextraction was used as sampling technique. In this method, the organometallic compounds arein situ derivatised in the aqueous phase and simultaneously extracted onto a polydimethylsiloxane fiber, so that organic solvents are no longer necessary. The sorbed organometals are subsequently released from the fiber in the GC injection liner by thermal desorption. By sampling from the headspace, only the species of interest are sampled and no interfering matrix components are coextracted. With this new method, derivatisation, extraction, preconcentration and injection into the GC takes only 10 min with a minimum of handling steps. Owing to the very low detection limits (0.13–3.7 ng/1 as metal) only small sample amounts (25 ml of water, 0.5 g of sediment) are needed for one analysis. Finally, SPME is an inexpensive sampling technique that can be used with standard split/splitless injection systems.