N‐Alkylacylamides in Thin Films Display Infrared Spectra of 310‐, α‐, and π‐Helices with Visible Static and Dynamic Growth Phases

A peptide model is a physical system containing a CONH group, the simplest being HCONHCH₃, N‐methylformamide (NMF). We have discovered that NMF and N‐methylacetamide (NMA), which form hydrogen‐bonded oligomers in thin films on a planar AgX fiber, display infrared (IR) spectra with peaks like those of polypeptide helices. Structures can be assigned by their amide I maxima near 1672 (3₁₀), 1655 (3₁₀), 1653 (α), 1655 (π), and 1635 cm^?1 (π), which are the first IR data for the π‐helix. Sharp peaks are an outcome of immobilization of polar species on the polar surface of silver halides. We report the first use of expanded thin‐film IR spectroscopy, in which plots of every spectrum over the amide I–II range show pauses or slow stages in the increase or decrease of absorption. These are identified as static phases followed by dynamic phases, with the incremental gain or loss of a helix turn. A general theory can be stated for such processes. Density functional calculations show that the NMA α‐helix pentamer (crystal structure geometry) is transformed into a π‐helix‐like form. For the first time, an entire sequence (3₁₀‐helix, α‐helix, π‐helix, quasiplanar species) of spectra has been recorded for NMA.     

污染物甲胺为电子给体可见光下Pt/ZnIn2S4光催化制氢

用水热法制备了ZnIn2S4固溶体,并通过XRD和UV-vis漫反射光谱进行了表征.研究了一甲胺、二甲胺和三甲胺为给电子体,在Pt/ZnIn2S4上的可见光光催化制氢及自身的降解反应.3种甲胺都能显著提高光催化分解水制氢活性,同时自身得到很好的降解.电子给体的放氢活性顺序为:TMADMAMMA.通过红外衰减全反射(ATR-IR)法检测电子给体在ZnIn2S4表面的吸附行为,吸附强度大小依次为MMADMATMA.光催化活性与分子结构和在催化剂表面的吸附行为有关.3种污染物浓度对放氢活性的影响都符合Langmuir-Hinshelwood动力学模型.讨论了可能的化学反应机理.     

十三氟辛基修饰的疏水有机-无机杂化二氧化硅膜孔结构、氢气分离及水热稳定性

采用1,2-双(三乙氧基硅基)乙烷(BTESE)和十三氟辛基三乙氧基硅烷(PFOTES)为前驱体,在酸性条件下通过溶胶-凝胶法制备了十三氟辛基修饰的有机-无机杂化SiO2膜材料。利用接触角测量、红外光谱、动态光散射和N2吸附等测试技术分别对膜材料的疏水性、溶胶粒径和孔结构进行表征,并深入研究有支撑膜材料的氢气渗透、分离性能以及长期水热稳定性。结果表明,十三氟辛基修饰后的膜材料由亲水性变成了疏水性,当nPFOTES/nBTESE=0.6时膜材料对水的接触角达到(110.4±0.4)°,膜材料还保持微孔结构,孔径分布在0.5~0.8 nm。氢气在修饰后的膜材料中的输运遵循微孔扩散机理,在300℃时,氢气的渗透率达到8.5×10-7mol·m-2·s-1·Pa-1,H2/CO2,H2/CO和H2/SF6的理想分离系数分别为5.49,5.90和18.36,均高于相应的Knudsen扩散分离因子。在250℃且水蒸气物质的量分数为5%水热环境下陈化250 h,氢气渗透率和H2/CO2的理想分离系数基本保持不变,膜材料具有良好的水热稳定性。     

Evidence for a Bulky Unit of a Pillar[5]arene Flipping in the Solid State

It is well known that pillar[5]arenes have two most stable conformations (pS and pR) in their crystal structures. Because of the intramolecular H‐bonding interactions, substituents, temperature, solvent and so on, the rotational behaviors of the phenolic units on pillararenes are also common. This paper showed some other kinds of conformations in the functionalized pillar[5]arenes and gave evidence for a bulky unit (1,4‐methoxycarbonylmethoxybenzene unit) flipping in the solid state. The presence of hydrogen bonding facilitated the intermolecular self‐assembly in terms of energy‐minimized packing in the crystals. Thus, the main driving force for the flipping of this bulky unit might be both the intramolecular hydrogen bonding between the phenolic units on pillararenes and quadrupolar hydrogen bonding between the host and water. This paper helps us to have a better understanding on the conformations of pillar[5]arenes.     

核壳结构Cu@CoW的合成和对硼氨配合物水解的催化性能

分别以硼氨配合物和硼氢化钠为还原剂合成了核壳结构的Cu@CoW三元合金催化剂和非核壳结构的CuCoW三元合金催化剂,25℃下,Cu0.4@Co0.5W0.1三元合金催化剂对于硼氨配合物水解反应的TOF(转换频率)值达到0.369 0 molH2·molcat-1·s-1,明显高于非核壳结构的Cu0.4Co0.5W0.1催化剂,接近Pt、Pd等贵金属的催化活性,反应的活化能为49 kJ·mol-1。与非核壳结构的CuCoW合金相比,核壳结构的Cu@CoW三元合金催化剂的催化性能及稳定性均有明显提高。     

LiNbO_3不同晶面的光催化产氢性能

研究了LiNbO3(001)、(100)和(110)晶面的光催化产氢性能。(001)、(100)和(110)3个晶面光催化产氢性能之比为7.8∶1.3∶1.0。LiNbO3[001]晶向存在电偶极矩和自发极化,有利于增加光生电子和空穴的分离效率,减少光生电子和空穴的复合,提高LiNbO3(001)面的光催化活性。LiNbO3(001)面的空穴有效质量最小,有利于光生空穴的迁移,从而减少光生电子和空穴的复合,也有利于光催化性能的提高。     

稀土元素取代对Ti_(0.26)Zr_(0.07)V_(0.24)Mn_(0.1)Ni_(0.33)贮氢合金结构和电化学性能的影响

研究了5种稀土元素部分取代V对Ti0.26Zr0.07V0..24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24Mn0.1Ni0.33和Ti0.26Zr0.07V0.24-xMn0.1Ni0.33REx(x=0.005;RE=La,Ce,Nd,Ho,Y)均由体心立方结构的钒基固溶体相和六方结构的C14 Laves相组成。在合金中加入稀土元素,会使合金中两相的晶胞体积同时增大。稀土元素部分取代V均改善了合金电极的活化性能。La和Nd元素取代后,合金电极的最大放电容量明显增加,而Ce的取代提高了合金电极的循环稳定性。Ce,Nd,Ho,Y均改善了合金电极的倍率放电性能。合金电极在高温状态下表现出了良好的放电性能,其中Nd在333 K时放电容量可达550.4 mAh·g-1。稀土元素对荷电保持率的影响各异。     

含2,6-二(甲基苯并咪唑)吡啶钴、镨配合物的合成、结构、电化学性质和理论计算研究

以2,6-二(甲基苯并咪唑)吡啶和2,2′-联吡啶为配体,合成了一个钴的配合物[Co(mbzimpy)(bipy)Cl]Cl O4·1.3H2O(1)和一个镨的配合物[Pr(mbzimpy)2(NO3)2]Cl O4·2CH3COCH3(2),(mbzimpy=2,6-bis(methylbenzimidazol-2-yl)pyridine,bipy=2,2′-bipyridine)并利用单晶衍射对其结构进行了表征。还对配合物1和2的荧光和电化学性质进行了研究。晶体结构中C-H…O氢键和π-π芳环堆积作用将每个单核分子连接成一个三维的空间结构。配合物1的TD-DFT理论计算的结果表明:实验得到的紫外谱图和理论计算的紫外谱图较好地吻合。通过循环伏安图可以了解金属中心的氧化和还原电子对。在不同偶极矩的溶剂中研究其荧光性能。     

Propane-1,2,3-triyl tris(hydrogen sulfate): A mild and effcient recyclable catalyst for the synthesis of biscoumarin derivatives in water and solvent-free conditions简

A simple, efficient, and ecofriendly procedure has been developed using propane-l,2,3-triyl tris（hydrogen sulfate） as a catalyst for the synthesis of biscoumarin derivatives in water and solvent-free conditions. The significant features of the present protocol are simplicity, environmentally benign, high yields, no chromatographic separation, and recyclability of the catalyst.     

One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.