Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

The dielectric properties of water in its different states of interaction

A tutorial on dielectric (relaxation) spectrometry of liquids is given in this article. Some methods of measuring complex (electric) permittivity spectra are briefly described. Results for water are presented and related to characteristic properties of the liquid structure and to models of the molecular dynamics, particularly as resulting from computer simulation studies. Dielectric spectra for aqueous solutions of low weight electrolytes, polyelectrolytes, small molecules, and polymers are discussed to illustrate effects of kinetic depolarization, structure saturation, as well as positive, negative, and hydrophobic hydration. Reference is also made to fluctuations in the hydrogen bond network of mixtures of water with liquids that are completely miscible with this unique solvent.     

高效液相色谱-串联质谱法同时测定表层水体中5类40种抗生素

建立了固相萃取-高效液相色谱-串联质谱（SPE-HPLC-MS/MS）同时检测表层水中5类40种抗生素的分析方法。水样经过滤、固相萃取柱富集净化后，以乙腈-0.2%（v/v）甲酸水溶液为流动相进行梯度洗脱，采用电喷雾电离源，在多反应监测、正离子模式进行定性定量分析。结果显示，40种抗生素在1~200 μg/L水平下线性关系良好，平均加标回收率为41.3%~112.6%。采用该方法对长江南京段表层水体进行检测，共检出13种抗生素，含量为13.4~780.5 ng/L，其中喹诺酮类抗生素恩诺沙星检出率达100%，大环内酯类抗生素克林霉素最高检出水平达739.4 ng/L。该法高效、灵敏、可靠，可用于实际水样中多种抗生素的分析。     

Pressurized hot water extraction of berberine, baicalein and glycyrrhizin in medicinal plants

Pressurized hot water extraction (PHWE) using a laboratory made system was applied for the extraction of thermally labile and reasonably polar components such as berberine in coptidis rhizoma, glycyrrhizin in radix glycyrrhizae/liquorice and baicalein in scutellariae radix. PHWE was carried out dynamically at a flow of 1 ml/min, temperature between 95 and 140 °C, an applied pressure of 10-20 bar and extraction time of 40 min. Extraction by PHWE was found to give efficiencies comparable to Soxhlet extraction for baicalein in scutellariae radix and sonication for berberine in coptidis rhizoma, and glycyrrhizin in radix glycyrrhizae. Effects of ethanol added into the water used in PHWE were explored. Pressurized liquid extraction (PLE) with methanol as solvent was used for extraction of baicalein in scutellariae radix. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC.     

Aspects of thermal conductivity relative to heat flow

Summary The various techniques and methodologies of thermal conductivity measurement have been conventionally based on the determination of the rate of directional heat flow through a material having a unit temperature differential between its opposing faces. The constancy of this rate depends on the material density, its thermal resistance and the heat flow path itself. The last of these variables contributes most significantly to the true value of steady-state axial and radial heat dissipation depending on the magnitude of transient thermal diffusivity along these directions. The purpose of this paper is to exemplify the above features by defined parameters of heat flow measurement by existing methodologies. No new method is proposed here. Importantly, the relationship between the rate of heat transfer, total heat transferred and thermal conductivity at a given temperature under steady-state conditions for a fixed heat flow path will be illustrated.     

流动注射在线阴离子树脂预富集火焰原子吸收测定痕量铜

研究了以阴离子交换树脂作吸附剂的流动注射在线微柱预富集火焰原子吸收测定铜的新方法。在最佳条件下富集１５０ｓ，富集２３倍，检出限０．２μｇ／Ｌ，ＲＳＤ为１．６％，分析速度２０次／ｈ。天然水样中可能存在的离子不干扰铜的测定。所建立的方法已用于水样中痕量铜的测定。     

氧气在阴极的电还原及其应用研究进展

本文综述了氧阴极电还原的研究进展，着重介绍了阴极表面修饰对该过程的影响以及氧阴极电还原在有机物电合成与废水处理方面的研究进展。     

Preparation and swelling properties of hydrolysis-resistant superabsorbent composite based on acrylic acid and sodium bentonite

Abstract

A novel hydrolysis-resistant superabsorbent composite was prepared via the solution polymerization based on acrylic acid (AA) and sodium bentonite (SBT) as monomers, tetraallylammonium bromine (TAAB) as crosslinker and ammonium persulfate (APS) as initiator. The mechanism of polymerization and the structure of the superabsorbent polymer (SAP) were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (X-ray), and scanning electron microscopy (SEM). The reaction conditions such as different mass ratios of APS to AA, TAAB to AA, SBT to AA, neutralization degree of AA were optimized by orthogonal experiment, and the influence of each reaction condition on the capacity of water absorption at 150?°C was investigated via single-factor controlled experiment. The hydrolysis resistance and swelling kinetics of the SAP were studied in different solutions at 150?°C. Compared to traditional SAPs, the SAP synthesized with TAAB as crosslinker performed a more excellent hydrolysis resistance and water absorbency capacity at high temperatures. The water absorbency in distilled water or 0.1?mol L^?1 NaCl solution could reach 392.6 and 145.2?g g^?1at 150?°C, respectively. The SAP maintaining high swelling capacity in the pH range of 5–9 indicated its wide application values in the acidic or alkaline environment at high temperature. In addition, the SAP exhibited good reusability which could still retain about 73% of its initial water absorbency after reswelling six times at 150?°C.     

Thermodynamic study of complex formation of benzo-18-crown-6 with K+, Tl+, and Pb2+ in water

H ⁰ and S ⁰ values of the complex formation in water of benzo-18-crown-6 (B18C6) with K⁺, Tl⁺, and Pb²⁺ were determined and compared with those of 18-crown-6. The H⁰ values of B18C6 are negative. The stability in water of the B18C6-metal ion complex at 25°C is governed largely by the magnitude of the H ⁰ value. The B18C6-metal ion complex is less stable in water than the corresponding 18C6-metal ion complex. This is due largely to a less favorable enthalpic contribution of the B18C6-metal ion complex compared with the corresponding 18C6-metal ion complex. The two aromatic ether oxygen atoms of B18C6 are responsible for the larger H ⁰ value of the B18C6-metal ion complex compared with the corresponding 18C6-metal ion complex.     

Metal carbonyl catalysis of carbon monoxide and formate reactions

The water gas shift reaction (CO + H₂O = CO₂+ H₂) is catalyzed by aqueous metal carbonyl systems derived from simple mononuclear carbonyls such as Fe(CO)₅ and M(CO)₆ (M = Cr, Mo, and W) and bases in the 140–200 °C temperature range. The water gas shift reaction in a basic methanol-water solution containing Fe(CO)₅ is first order in [Fe(CO)₅], zero order in [CO], and essentially independent of base concentration and appears to involve an associative mechanism with a metallocarboxylate intermediate [(CO)₄Fe-CO₂H]^–. The water gas shift reactions using M(CO)₆ as catalyst precursors are first order in [M(CO)₆], inverse first order in [CO], and first order in [HCO₂ ^–] and appear to involve a dissociative mechanism with formatometallate intermediates [(CO)₅M-OCHO]^–.The Reppe hydroformylation of ethylene to produce propionaldehyde and 1-propanol in basic solutions containing Fe(CO)₅ occurs at 110–140 °C. This reaction is second order in [Fe(CO)₅], first order in [C₂H₄] up to a saturation pressure >1.5 MPa, and inhibited by [CO]. These experimental results suggest a mechanism where the rate-determining step involves a binuclear iron carbonyl intermediate. The substitution of Et₃N for NaOH as the base facilitates the reduction of propionaldehyde to 1-propanol but results in a slower rate for the overall reaction.The homogeneous photocatalytic decomposition of the formate ion to H₂ and CO₂ in the presence of Cr(CO)₆ appears to be closely related to the water gas shift reaction. The rate of H₂ production from the formate ion exhibits saturation kinetics in the formate ion and is inhibited by added pyridine. The infrared spectra of the catalyst solutions indicate an LCr(CO)₅ intermediate. Photolysis of the Cr(CO)₆/formate system in aqueous methanol in the presence of an aldehyde RCHO (R =n-heptyl,p-tolyl, andp-anisyl) results in catalytic hydrogenation of the aldehyde to the corresponding alcohol RCH₂OH by the formate ion. Detailed kinetic studies onp-tolualdehyde hydrogenation by this method indicates saturation kinetics in formate ion, autoinhibition by thep-tolualdehyde, and a threshold effect for Cr(CO)₆ at concentrations >0.004 mol L^–1. The presence of an aldehyde can interrupt the water gas shift catalytic cycle by interception of an HCr(CO)₅ ^– intermediate by the aldehyde.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1533–1539, September, 1994.