激光合作目标用玻璃微珠的研制

本文研究了玻璃及成珠工艺对激光合作目标特性的影响，并设计了特殊设备和工艺规程，在此基础上研制出高性能激光合作目标用的玻璃微珠     

Azide‐based Cross‐Linking of Polymers of Intrinsic Microporosity (PIMs) for Condensable Gas Separation

Cross‐linked polymers of intrinsic microporosity (PIM)s for gas separation membranes, were prepared by a nitrene reaction from a representative PIM in the presence of two different diazide cross‐linkers. The reaction temperature was optimized using TGA. The homogenous membranes were cast from THF solutions of different ratios of PIM to azides. The resulting cross‐linked structures of the PIMs membranes were formed at 175 °C after 7.5 h and confirmed by TGA, XPS, FT‐IR spectroscopy and gel content analysis. These resulting cross‐linked polymeric membranes showed excellent gas separation performance and can be used for O₂/N₂ and CO₂/N₂ gas pairs, as well as for condensable gases, such as CO₂/CH₄, propylene/propane separation. Most importantly, and differently from typical gas separation membranes derived from glassy polymers, the crosslinked PIMs showed no obvious CO₂ plasticization up to 20 atm pressure of pure CO₂ and CO₂/CH₄ mixtures.

     

Sensitive Parameter Predicting Steady-State Pressure Difference of Partially Crosslinked Polyacrylamide Suspension in Core Flow Experiments

Using artificial cores, six different partially crosslinked polyacrylamide (PCPAM) suspensions were used for sandpacked core flow experiments; the results indicated that the migration of the PCPAM particles through porous media was a process of plugging and flooding at the same time. A theoretical model was proposed and the sensitive parameter, G′, was determined by rheological oscillation measurements with a 200 μm plate gap. In addition, the validity of the proposed theoretical model was verified by the results of the core flow experiments and a fitting equation of ΔP ₁ with G′ was obtained which can be used for quantifying the steady-state pressure of PCPAM suspensions flowing through porous media in the core flow experiments.     

Preparation of Poly (L-lactic Acid) Microsphere

Poly (L-lactic acid) (PLLA) microspheres were prepared by a solvent evaporation method based on an oil/water emulsion. The effect of the mass ratio of PLLA and poly(vinyl alcohol) (PVA) on the formation of the microspheres was discussed, and the influence of extraction speed of dichloromethane on the microsphere morphology was also studied. Moreover, the influences of the PLLA concentration and the volume ratio of water phase to dichloromethane phase were investigated. The results showed that stable microspheres can be obtained under the conditions that the mass ratio of PLLA to PVA is 20:1. Porous microspheres were obtained under faster evaporating speed of dichloromethane. The microsphere size increased with increasing PLLA concentration. The microsphere size also increased with the increase of the volume ratio of water phase to dichloromethane phase.     

单分散键合型含铕聚苯乙烯微球的制备与荧光传感性能

制备了一种可定性定量检测水溶液中三价铁离子的含铕聚苯乙烯微球, 分别用固体核磁碳谱(¹³C CP/MAS NMR)、 傅里叶变换红外光谱(FTIR)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 元素分析、 粒度分析和ζ电位分析等对其化学组成和结构形貌进行表征. 当铕配合物单体用量低于2.5%时, 可以得到稳定的单分散键合型含铕聚苯乙烯微球. 用紫外光激发时, 该含铕聚苯乙烯微球发射铕离子的特征红光. Fe³⁺能猝灭该微球的荧光, 酸根离子和其它金属离子对其干扰较少; 猝灭效率与Fe³⁺浓度在0~300 μmol/L浓度范围内均呈线性关系; 随着铕配合物单体用量的增加, 微球的荧光增强, 其在检测Fe³⁺的荧光时, 猝灭常数(K_SV)增加, 检测限(LOD)下降. 调节铕配合物单体的用量, 可获得热性能优异、 红光发射强度高且稳定性好的单分散聚苯乙烯荧光微球, 对Fe³⁺荧光检测显示出较高的选择性, 在生物检测和环境保护等领域具有较高的应用价值.     

Optical fields in a multilayered microsphere with a quasiperiodic spherical stack

We studied the frequency spectrum of photons in a multilayered microsphere coated by a quasiperiodic (Fibonacci) dielectric stack numerically. We found that the transmittancy spectrum of such a stack consists of quasiband gaps and narrow resonances caused by re-reflection of optical waves. When the number (Fibonacci order) of layers increases, the band gaps and resonances split, and the structure of the frequency spectrum acquires a fractal form. We found the self-similarity of the frequency spectrum and evaluated the fractal dimension both for lossless and dissipative cases. The influence of a weak random deviation of spherical layers width is also discussed.     

Facile synthesis of linear–hyperbranched polyphosphoesters via one‐pot tandem ROMP and ADMET polymerization and their transformation to architecturally defined nanoparticles

A convenient one‐pot synthesis of linear–hyperbranched polyphosphoesters (l–HBPPEs) was accomplished by a tandem ring‐opening metathesis polymerization (ROMP) and acyclic diene metathesis (ADMET) polymerization procedure. A linear monotelechelic poly(norbornene) with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as a macromolecular chain stopper in subsequent ADMET polymerization of a phosphoester functional AB₂ monomer, yielding l–HBPPEs as the reaction time prolonged. These l–HBPPEs bearing lots of pendent thiol groups in linear poly(norbornene) and peripheral acrylate groups in HBPPE could be self‐crosslinked in ultradilute solution through thiol‐Michael addition click reaction between acrylate and thiol to give single‐molecule nanoparticles with comparatively uniform size. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 964–972     

Topological Phase Transition of Non-Hermitian Crosslinked Chain

The contents of topological classification of matter are enriched by non-Hermiticity, such as exceptional points, bulk-edge correspondence, and skin effects. Physically, gain and loss can be introduced by imaginary on-site potentials of lattice Hamiltonians, and the topological phase transition for a cross-linked chain in the presence of such non-Hermiticity is investigated. The topological phase diagram in terms of a winding number is obtained analytically with phase boundaries coinciding with the surfaces of exceptional points. The topologically original edge states with distribution mainly at the joints between domains of different phases are protected even for long chains. The non-Hermitian topological feature can also be reflected by vortex structures in the vector fields of complex eigenenergies, expected values of Pauli matrices, and trajectories of these quantities. This model may be implemented in coupled photonic crystals, fermions trapped in optical lattice, or non-Hermitian electrical-circuit lattices, and the edge states are immune to various kinds of disorders until topological phase transition occurs. This work gives insight into the influence of non-Hermiticity on topological phase of matter.     

Visible‐light photocatalytic activity of Ag@MIL‐125(Ti) microspheres

Ag nanoparticle (NP)‐decorated MIL‐125(Ti) microspheres (Ag@MIL‐125(Ti)) were firstly fabricated via a facile hydrothermal and following photo‐reduction method. The photocatalysts were characterized using X‐ray diffraction, scanning and transmission electron microscopies, X‐ray photoelectron spectroscopy and UV–visible diffuse reflectance spectroscopy. The characterization results indicated that Ag NPs were dispersed on the surface of MIL‐125(Ti) microspheres, and the Ag NPs had a uniform diameter of about 40 nm. The composites exhibited excellent visible‐light absorption, due to the modification with the Ag NPs. The photocatalytic activity for the visible‐light‐promoted degradation of Rhodamine B was improved through the optimization of the amount of Ag loaded as a co‐catalyst, this amount being determined as 3 wt%. Additionally, studies performed using radical scavengers indicated that O₂^? and e^? served as the main reactive species. The catalyst can be reused at least five times without significant loss of its catalytic activity. Furthermore, a photocatalytic mechanism for degradation of organics over Ag@MIL‐125(Ti) is also proposed. Copyright © 2015 John Wiley & Sons, Ltd.     

海藻酸壳聚糖可塑性支架材料的制备及表征

利用海藻酸钠和壳聚糖2种原料, 采用阴阳离子静电复合原理, 通过滴注法层层自组装成可搭载药物的缓释微球, 再按一定比例与海藻酸钠-壳聚糖溶液混合制成缓释微球型支架材料, 将缓释微球结构嵌入疏松多孔海绵状结构中. 研究了缓释微球的组分比对缓释微球型支架材料的孔隙率、 收缩率、 亲水性及降解性能的影响; 扫描电子显微镜照片显示, 微球结构相对完整, 多孔海绵状结构孔径为140~200 μm; 支架浸出液细胞毒性检测实验组对照组未见差异. 缓释微球体积所占比例即组分比为10%的缓释微球型支架材料孔隙率最高为68.2%~70.8%, 亲水性最好, 收缩率最低为4.4%~5.2%; 支架降解速率随缓释微球组分比升高而减慢, 组分比为20%的缓释微球型支架材料综合性能更优; 缓释微球型支架材料冻干成型前为液态, 具有良好可塑性. 缓释微球型支架材料为缓释系统与多孔支架材料有机结合提供了新思路.