The variation of carrier gas viscosities with temperature

After describing simplified equations exspressing the temparature dependency of the viscosity of carrier gases (helium, nitrogen and hydrogen ) relative to a base value, absolute relationships based on the kinetic theory of gases are discussed. Comparative data obtained using various calculation methods are given and are compared to measured values. Based on the kinetic relationshipsm, of viscosity. Finally, the influence of pressure on the viscosity is also briefly discussed. As a supplement, Viscosity data are tabulated for the three gases in the range of 0°C to 400°C in increments of 2 K, calculated using the kinetic relationships.     

Size dependence of self-diffusion in the hard-square lattice gas

A striking size dependence of the mean-square displacement of diffusing particles in the two-dimensional lattice gas of hard squares has been observed by Monte Carlo simulation. It is shown that the size effect is due to the formation of a stable cage structure in small lattices when the particle concentration is high. The formation of cages is governed by a new type of percolation problem related to bootstrap percolation.     

颗粒速度在颗粒流稀疏流-密集流转变中的作用

用实验和计算模拟的方法研究了颗粒流中的颗粒速度与颗粒流特性的关系.实验研究发现当入口流量固定时，在出口上方高速运动的颗粒会使颗粒流由稀疏流向密集流转变的临界出口尺寸变小.当颗粒流转变为密集流后，颗粒速度的作用被出口上方的颗粒堆积区所消耗，最终变得与颗粒速度无关.二维分子动力学模拟计算得到了与实验相同的结论.通过二维分子动力学模拟计算，还给出了不同颗粒速度下体系的密度和速率在空间的分布图.这些分布图显示随着颗粒到达出口上方的瞬间速度的不同，颗粒堆积区的密度和高度均会改变，并最终导致颗粒流流动状态的改变. 关键词： 颗粒流 颗粒气体 分子动力学模拟     

Synthesis and properties of poly(phenylacetylenes) having two polar groups or one cyclic polar group on the phenyl ring

Phenylacetylene (PA) derivatives having two polar groups (ester, 2a – d ; amide, 4) or one cyclic polar group (imide, 5a – c ) were polymerized using (nbd)Rh⁺[(η⁶‐C₆H₅)B^?(C₆H₅)₃] catalyst to afford high molecular weight polymers (～1 × 10⁶ – 4 × 10⁶). The hydrolysis of ester‐containing poly(PA), poly( 2a) , provided poly(3,4‐dicarboxyPA) [poly ( 3 )], which could not be obtained directly by the polymerization of the corresponding monomer. The solubility properties of the present polymers were different from those of poly(PA) having no polar group; that is, poly( 2a )–poly( 2d ) dissolved in ethyl acetate and poly( 4 ) dissolved in N,N‐dimethylformamide, while poly(PA) was insoluble in such solvents. Ester‐group‐containing polymers [poly( 2a )–poly( 2d )] afforded free‐standing membranes by casting from THF solutions. The membrane of poly( 2a ) showed high carbon dioxide permselectivity against nitrogen (PCO₂/PN₂ = 62). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5943–5953, 2006     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Growth of oxide thin films for optical gas sensor applications

Tungsten trioxide and titanium dioxide thin films were synthesised by pulsed laser deposition. We used for irradiations of oxide targets an UV KrF* (λ = 248 nm, τ_FWHM ≅ 20 ns, ν = 2 Hz) excimer laser source, at 2 J/cm² incident fluence value. The experiments were performed in low oxygen pressure. The (0 0 1) SiO₂ substrates were heated during the thin film deposition process at temperature values within the 300-500 °C range. The structure and crystalline status of the obtained oxide thin films were investigated by high resolution transmission electron microscopy. Our analyses show that the films are composed by nanoparticles with average diameters from a few to a few tens of nm. Moreover, the films deposited at substrate temperatures higher than 300 °C are crystalline. The tungsten trioxide films consist of a mixture of triclinic and monoclinic phases, while the titanium dioxide films structure corresponds to the tetragonal anatase phase. The oxide films average transmittance in the visible-infrared spectral range is higher than 80%, which makes them suitable for sensor applications.     

A testbench for the nested dipole hypothesis of Kosterlitz and Thouless

We consider the two-dimensional one-component plasma without a background and confined to a half-plane near a metal wall. The particles are also subjected to an external potential acting perpendicular to the wall with an inverse-power-law Boltzmann factor. The model has a known solvable isotherm which exhibits a Kosterlitz-Thouless-type transition from a conductive to an insulator phase as the power law is varied. This allows predictions of theoretical methods of analyzing the Kosterlitz-Thouless transition to be compared with the exact solution. In particular, we calculate the asymptotic density profile by resumming its low-fugacity expansion near the zero-density critical coupling in the insulator phase, and solving a mean-field equation deduced from the first BGY equation. Agreement with the exact solution is obtained. As the former calculation makes essential use of the nested dipole hypothesis of Kosterlitz and Thouless, the validity of this hypothesis is explicitly verified.     

Nd2O3掺杂对SnO2气敏性质的影响

SnO_2是目前应用最广的一种气敏材料。我们曾经报道掺入La_2O_3,CeO_2,Pr_6O_(11),和Nd_2O_3后可使半导体元件的灵敏度提高,尤以对乙醇、乙醚、丙酮为显著。掺Nd_2O_3元件对乙炔的灵敏度也有提高。本文考察了SnO_2粒度和被测气氛的物化性质对掺Nd_2O_3元件灵敏度的影响。SnO_2采用水解SnCl_4法制备,纯度经光谱分析测定合格,试样用标准筛分目。在SnO_2中加1wt%Nd_2O_3(光谱纯)和适量水及甲基纤维素,混磨15分钟。将制成的悬浊液滴在一对铂