Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

Chemical preparation and investigation of Fe-P-B ultrafine amorphous alloy particles

A series of Fe-P-B ultrafine amorphous alloy particles has been prepared by the chemical reduction method The composition and size of the particles have been effectively adjusted.Mossbauer spectroscopy in addition to sonic other techniques has been used to investigate the reaction process,the factors that influence the preparation,the crystallization of the particles,and the interactions between the components within them.The results indicate that the co-deposition of iron,phosphorus and boron atoms in the solution at room temperature forms Fe-P-B amorphous alloy particles,and a preferential bonding of Fe-P bond to Fe-B one exists in the particles.     

Preparation of spherical spinel LiMn2O4 cathode material for lithium ion batteries

A novel process is proposed for synthesis of spinel LiMn₂O₄ with spherical particles from the inexpensive materials MnSO₄, NH₄HCO₃, and NH₃H₂O. The successful preparation started with carefully controlled crystallization of MnCO₃, leading to particles of spherical shape and high tap density. Thermal decomposition of MnCO₃ was investigated by both DTA and TG analysis and XRD analysis of products. A precursor of product, spherical Mn₂O₃, was then obtained by heating MnCO₃. A mixture of Mn₂O₃ and Li₂CO₃ was then sintered to produce LiMn₂O₄ with retention of spherical particle shape. It was found that if lithium was in stoichiometric excess of 5% in the calcination of spinel LiMn₂O₄, the product had the largest initial specific capacity. In this way spherical particles of spinel LiMn₂O₄ were of excellent fluidity and dispersivity, and had a tap density as high as 1.9 g cm^–3 and an initial discharge capacity reaching 125 mAh g^–1. When surface-doped with cobalt in a 0.01 Co/Mn mole ratio, although the initial discharge capacity decreased to 118 mAh g^–1, the 100th cycle capacity retention reached 92.4% at 25°C. Even at 55°C the initial discharge capacity reached 113 mAh g^–1 and the 50th cycle capacity retention was in excess of 83.8%.     

Morphology control of soap-free seeded P(St-EA-AA) latex particles

Soap-free poly(styrene-ethyl acrylate-acrylic acid) latex particles with narrow size distribution and with surface carboxyl groups were synthesized by semicontinuous emulsion polymerization, and the particles with homogeneous multihollow structure were obtained after alkali posttreatment. Effects of treatment conditions and crosslinking agents on particle morphology were investigated. Results showed that the multihollow structure can be formed inside the uncrosslinked particles only when the treatment temperature exceeded 50 °C, the pH was higher than 10.0, the amount of 2-butanone was more than 3.0 ml and the treatment time was longer than 30 min. Furthermore, the volume expansion of the particles increased with the temperature increased to 90 °C, the pH to 12.5 or the amount of 2-butanone to 7.0 ml, and this value increased first and then decreased with the treatment time prolonged. Fine pores can be generated in the shell of particles crosslinked by 0.2 g of ethyl glycol dimethylacrylate (EGDMA), while no hollow structure formed inside particles when 0.4 g of EGDMA or 0.2 g of divinyl benzene was used.     

中药配方颗粒红外光谱法的快速鉴别

采用红外光谱法对中药配方颗粒及其辅料进行了鉴别研究。结果表明：不同生产厂商的配方颗粒中所添加的辅料类型及用量有较大差别；不同种的配方颗粒在辅料含量较低的情况下有较明显的指纹性，而辅料含量较高时，采用差谱技术可以提高谱图的指纹性，达到中药配方颗粒--鉴别的目的。该法简便、快速、可靠，是中药配方颗粒宏观质控的一个强有力的手段。     

单分散交联聚甲基丙烯酸环氧丙酯树脂的制备及亲合纯化伴刀豆球蛋白-A

采用一步种子溶胀聚合法制备了颗粒呈单分散的交联聚甲基丙烯酸环氧丙南树脂，对其环氧基的组成比进行了表征，并以氨基葡萄糖为配基，首次制备了纯化粗品伴刀豆球蛋白-A(Ⅲ）(Con-A，Ⅲ)的聚合物基质的高效亲合色谱柱。配基在树脂上的键合量为8．2mg／g，对纯化后的Con-A（Ⅲ）的吸附量为13．4mg／g。使用该亲合色谱介质成功地从粗品Con-A中快速纯化了Con-A，电泳分析显示为一个主要的谱带，纯度从15％提高到95％。     

Thermal conductivity measurements on ferrofluids

The thermal conductivity of a number of ferrofluids consisting of colloidally dispersed Fe₃O₄ particles in diester, hydrocarbon, water and fluorcarbon carriers have been measured at 38°C. The variation in thermal conductivity with particle concentration is well described by Tareef's equation (1940). This has enabled the ratio of the physical to magnetic size to be determined and compared with estimates of the ratio obtained from electron micrographs and magnetic measurements.The fit between theory and experiment is particularly good for hydrocarbon carrier fluids giving the ratio of solid to magnetic radiusR _i/R _m=1.24±0.03 compared with the value obtained from magnetic data and electron micrographs of 1.19±0.07. The corresponding value from the fluids with a diester carrier ranges between 1.1<R _d/R _m<1.3 which is again consistent with microscopy and magnetic data.The application of a magnetic field of 0.1 T had no noticeable effect on the thermal conductivities of ferrofluids.     

Electric parameters of photosystem II particles — electric light scattering study

Electric light scattering and microelectrophoresis were applied to investigate the electric moments (permanent dipole moment and electric polarizability and electrophoretic mobility of envelope-free chloroplasts and photosystem II (PS II particles. The effect of the removal of the extrinsic polypeptides (18, 24 and 33 kDa) on the electric moments was also studied. A significant difference was observed between the orientation behaviour of chloroplasts and PS II preparations. The data indicate that the permanent and induced dipole moments contribute to the orientation of the PS II particles, whereas chloroplasts possess induced dipole moment only.

NaCl and Tris treatments of PS II preparations influence both the transverse permanent dipole moment and the electric polarizability of PS II particles. The increase in the electrophoretic mobility of PS II particles on removal of the extrinsic proteins corresponds to an increase in the electric polarizability value, demonstrating its interfacial nature.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.