The effect of the amphiprotic nature of human hair keratin on the adsorption of high charge density cationic polyelectrolytes

Adsorption of the cationic polymers poly(methacrylamidopropyltrimethyl ammonium chloride) (PMAPTAC) and poly(1,1-dimethylpiperidinium-3,5-diallylmethylene chloride) (PDMPDAMC) on human hair was studied by measurements of the amount of polymer adsorbed and by the streaming potential method. Results reflect the amphoteric nature of the keratin surface and show that the excess of anionic sites at pH values above 4 is the main driving force for the adsorption of cationic polyelectrolytes. Lowering the pH below 4 or addition of neutral salt (KCl) reduces the amount of adsorbed polymer. It was shown that the adsorption of cationic polymer in the concentration range 0.01 to 0.1 % and at neutral pH reverses the overall character of the surface from anionic to cationic. Keratin fibers modified in this manner do not exhibit amphoteric character and bear excess positive charge in the pH range 2–9.5. The value of the amount of the polymer adsorbed at saturation concentration (2 mg/g) as well as the lack of molecular weight effect in the range (5 · 10⁴ – 10⁶) on the amount of polymer adsorbed suggest that polymer chains adopt a rather extended conformation on the fiber surface. Some data concerning the formation of a complex between adsorbed cationic polymer and anionic detergents or polyelectrolytes are also presented.     

Conductive characteristics of radical‐bearing polythiophenes using a microcomb‐shaped electrode

The electric conductivity of π‐conjugated and radical‐bearing polymers, i.e., polythiophenes bearing pendant galvinoxyl and phenoxyl radical groups, was measured using a microcomb‐shaped electrode. The electric conductivity was found to be enhanced by the radical content in the polymer. The infrared (IR) and Raman spectroscopies suggested a structural change from an aromatic form to a quinoid one in the polythiophene backbone by the phenoxyl radical generation. The effect of the pendant galvinoxyl radical's unpaired electron on the electric conductivity of the polythiophene was discussed by comparing the conductivity of a radical‐bearing polystyrene and a polythiophene mixed with low‐molecular radical molecules. Copyright © 2007 John Wiley & Sons, Ltd.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

聚噻吩的固相聚合及其应用

作为共轭聚合物的典型代表,因聚噻吩衍生物具有良好的稳定性和结构易改性,其在有机光电子领域、新能源等有重要的应用。而固相聚合作为一种环保、可大规模制备等优点,受到研究者的关注。本文主要总结了近年来聚噻吩及其衍生物的固相聚合反应单体分子设计、聚合研究机理以及相关应用的进展,并展望了未来的研究方向。     

On the Randić Index of Acyclic Conjugated Molecules

The Randić index of an organic molecule whose molecular graph is G is the sum of the weights (d(u)d(v))^−1/2 of all edges uv of G, where d(u) and d(v) are the degrees of the vertices u and v in G. We give a sharp lower bound on the Randić index of conjugated trees (trees with a perfect matching) in terms of the number of vertices. A sharp lower bound on the Randić index of trees with a given size of matching is also given Mei Lu: Partially supported by NNSFC (No. 60172005) Lian-zhu Zhang: Partially supported by NNSFC (No. 10271105) Feng Tian: Partially supported by NNSFC (No. 10431020)     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

Spectroscopic Interrogation of Layer-by-layer Assembled Films of Conjugated Polyelectrolytes

Layer-by-layer fluorescent conjugated polyelectrolyte films have been studied. The photoluminescence of conjugate polyelectrolytes was observed to be highly tunable during this film assembly process. Efficient photoinduced electron transfer from thus prepared highly luminescent film to a natural electron-transfer protein cytochrome c has also been observed.     

Oriented thin films from soluble polythiophenes

The degree of orientation of thin films of eight different polymeric structures, belonging to the class of soluble polyalkylthiophenes (PATs) has been studied. Thin films of the polymers, obtained by spin coating onto glass substrates, were oriented by means of the rubbing technique. The degree of orientation is related to the regioregularity of the system: highly regioregular polymers can be oriented, while regiorandom materials are not oriented. The degree of orientation can be improved by thermal annealing of the oriented films. As a result of annealing, which was performed at different temperatures according to the thermal behavior of the polymers, it was possible to increase the polarization ratio for poly(3-decylthiophene) up to 12–13 as detected from the UV-vis spectra in polarized light. Moreover in the investigated PATs, both the key role of molecular weight and its distribution for achieving a high orientation degree has been assessed. Copyright © 2003 John Wiley & Sons, Ltd.     

超支化共轭聚合物的合成、性质及在光电器件中的应用研究进展

简述超支化共轭聚合物光电活性材料研究进展,设计、合成了多种具有3-D立体结构的超支化共轭聚合物,研究了它们的结构与性能的关系及其在器件上的应用.实验结果表明,这种聚合物具有良好的溶解性,可成膜性和高的发光效率.可应用于发光二极管(LED),发光电化学池(LEC),光伏打电池等器件.这类化合物不仅可以作为发光材料,还可以通过修饰得到具有分子或离子识别、信息存储性能的特殊功能材料.