纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Chemischer Transport von Cr2O3 mit CrI3/I2 – Experimente und Modellrechnungen zur Beteiligung von CrOI2,g

On the Chemical Transport of Cr₂O₃ with CrI₃/I₂ – Experiments and Model-Calculations for Participation of CrOI_2,g Gaseous chromium oxyiodides that were unknown up to now cause the migration of Cr₂O₃ in the temperature gradient 1 000°C→900°C when iodine (e. g. 0.1 mmol/ml) and CrI₃ is added (eq. (1)). Transport agent for Cr₂O₃ is gaseous CrI₄. With a smaller concentration of iodine (D(I₂) ? 0.016 mmol/ml) and lower temperatures (e.g. T? = 850°C) the influence of H₂O (from the wall of the silica ampoule) becomes more important. Under these conditions the transport of Cr₂O₃ is a result from the endothermic reactions (2), (3) and (4). H_2,g has on the basis of the decomposition of HI_g a positive difference of the solubility and H_2,g should not to be considered as a transport agent. Because of the range of equilibrium-values the reaction 4 has to be taken into consideration. Estimated value of the enthalpie for CrOI_2,g is fixed more precisely by thermodynamic model calculation to Δ_fH°₂₉₈(CrOI_2,g) = ?51.4 kcal/mol. The estimated limit of error for the enthalpie of formation is smaller than ± 5 kcal/mol. Without an addition of CrI₃ is in the system Cr₂O₃/I₂ a migration of Cr₂O₃ not observable.     

Perfluoropoly-ether/peroxide compounds: spectroscopic studies and quantum chemical calculations

Perfluoropolyethers (PFPEs) are a class of high performance materials used in a wide range of applications (refrigeration, lubrication, semiconductor industry, etc.). PFPEs containing peroxidic units are intermediate materials for the preparation of commercial end products. In this work we study the spectroscopic properties of ether and peroxides linkages in this class of compounds; nuclear magnetic resonance (NMR) spectra are discussed, FT-Raman data presented. Quantum chemical calculations on model molecules were used as a tool for the interpretation of the Raman experimental data and physical-chemical properties.     

Reduced parabolic model for radical addition reactions

The transition state of addition of free radicals and atoms to multiple bonds is considered as a result of intersecting of two parabolic potential curves. One of them characterizes the stretching vibration of the attacked multiple bond, and another curve characterizes the stretching vibration of the bond formed in the transition state. The force constant of the latter is calculated by an empirical equation that correlates the force constant with the bond dissociation energy. In the framework of this model, the thermally neutral activation energy (E _e0) and the elongation of the attacked and formed bonds (r _e) in the transition state were calculated from the experimental data (activation energy (E _e) and enthalpy of reaction (H _e)) for the addition of an H atom and methyl, alkoxyl, aminyl, triethylsilyl, and peroxyl radicals to the C=C bond and the addition of H and CH₃ to the C=O and CC bonds. Analysis of the data obtained showed that E _e0 depends linearly on the |H _e| + E_e sum, i.e., E_e0/kJ mol^–1 = 14.2 + 0.61 · (E_e – H _e), and the bond elongation in the transition state for addition of the most part of radicals to ethylene and acetylene vary within (0.65–0.87)·10_–10 m. The factors affecting the activation energy of the radical addition reactions are discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1542–August, 2004.     

钛硅分子筛的结构表征及催化性能研究

以ＴＰＡＢｒ为模板剂，氨水等为碱源合成了钛硅分子筛ＴＳ－１，并利用ＸＲＤ，ＩＲ，元素分析，ＵＶ－ＶＩＳ，热分析等手段对合成的分子筛进行了表征，通过丙烯环氧化反应合成的ＴＳ－１催化性能。结果结果，ＴＳ－１凝胶与产品的硅钛与基本一致；随着硅钛比的降低，ＴＳ－１由单斜晶系过渡为正交晶系，在硅钛比为１２９－１６．７的范围内，随着进入骨架的钛量增加，单胞体积增大；     

Quantum chemical models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media (MOH-H<Subscript>2</Subscript>O-DMSO,M = Li,Na, K)

Models of alkali metal hydroxide-water-dimethylsulfoxide superbasic media have been constructed using Hartree Fock and DFT (B3LYP) quantum chemical methods; the structure and energies of anion complexes are considered. The hydroxide anion in the models is stabilized as complexes of OH^?·H₂O and OH^?· 2H₂O types.     

Identification of micro-scale calorimetric devices

Micro-calorimetric devices using Si-based sensors are very useful for the study of gas–solid reactions, in which very low mass of reactants are necessary. But in fact the consequence of using flat detectors is an increase of the uncertainty in the measured energy. In this work a calorimetric gas sensor based on Xensor chip is analysed studying the local x–y contributions of dissipation to the sensitivity related to the value in the centre. We study also the effects of the gas-flow on the sensitivity, comparing the results obtained with two Xensor type chips. Finally we carry out a deeper analysis of the x–y effects on the calorimetric detector for dissipations in the reactant shell extremely close to the detector surface to visualize the link between the power density distribution and the output signal.     

MH—Ni电池封口化成及其性能

在硼氢化钾碱性溶液中对金属氢化物（ＭＨ）电极的表面进行化学还原处理，提高了ＭＨ电极的放电容量、活化性能和电催化活性．用其为负极组装的ＡＡ型ＭＨ－Ｎｉ电池进行了封口化成，电池放电容量达到１１５０ｍＡｈ，５Ｃ下电池的放电容量达到０．２Ｃ下容量的８０％以上，电池在１Ｃ１００％ＤＯＤ（放电深度）充放电条件下，循环寿命由原来的１００次左右提高到２００次以上     

Orthogonal PbS nanowire arrays and networks and their Raman scattering behavior

Three-dimensional, orthogonal lead sulfide (PbS) nanowire arrays and networks have been prepared by using a simple, atmospheric pressure chemical vapor deposition (APCVD) method. These uniform nanowires (average diameter 30 nm) grow epitaxially from the surface of the initial PbS crystal seeds and form orthogonal arrays and networks in space. The growth mechanism has been explored, and the process was classified as homogeneous, epitaxial growth in the 200 directions. Furthermore, Raman spectra of PbS nanowires are reported here, and their characteristic Raman peak (190 cm(-1), no shoulder) could be used as a unique probe for the study of PbS nanomaterials.