Validation of Thermal Equilibrium Assumption in Transient Forced Convection Flow in Porous Channel

The validity of the local thermal equilibrium assumption in the transient forced convection channel flow is investigated analytically. Closed form expressions are presented for the temperatures of the fluid and solid domains and for the criterion which insures the validity of the local thermal equilibrium assumption. It is found that four dimensionless parameters control the local thermal equilibrium assumption. These parameters are the porosity , the volumetric Biot number Bi, the dimensionless channel length _max and the solid to fluid total thermal capacity ratio C _R. The qualitative and quantitative aspects of the effects of these four parameters on the channel thermal equilibrium relaxation time are investigated.     

Linear viscoelastic behavior of narrow molecular weight distribution 1,4 polybutadiene: Comparison with Doi-Edwards theory of reptation

Linear viscoelastic behavior of narrow molecular weight distribution 1,4 polybutadiene samples with molecular weights between 42500 and 779000 has been correlated with molecular structure using a simple modification of the Doi-Edwards theory of reptation. The entire GPC curve is required for the calculations of viscoelastic behavior.The plateau modulus obtained from the experimental data is comparable to literature values, while the equilibrium compliance (which is indicative of polydispersity) is greater than values reported in the literature for nearly monodisperse polybutadienes. Reasonable agreement between theory and experiment is obtained over the entire molecular weight range. The agreement between theory and experiment using the GPC curve is better than that obtained by assuming the polymer to be monodisperse or by using the Doi fluctuation model. The model appears to break down for a more polydisperse sample . This study indicates that it may be possible to use the Doi-Edwards theory to explain the viscoelastic behavior of narrow MWD polybutadienes without introducing any new concepts into the theory (fluctuations, constraints release, etc.).     

离子液体添加剂对硬脂酸钾固体润滑薄膜摩擦磨损性能的影响

采用浸渍-提拉方法在单晶硅片上制备硬脂酸钾以及添加离子液体的硬脂酸钾复合薄膜,采用DF-PM型静-动摩擦磨损试验机考察薄膜在低速滑动条件下的摩擦磨损性能,采用扫描电子显微镜和X射线能量散射谱仪观察分析薄膜及其偶件表面的磨损形貌及典型元素面分布.结果表明:在相对低速滑动条件下,在羟基化硅基底上制备的复合薄膜的摩擦磨损性能优于硬脂酸钾薄膜;在载荷为1.0 N条件下,含离子液体质量分数40.0%的复合薄膜的耐磨寿命超过5 000次,而硬脂酸钾薄膜仅为100次左右;随着复合薄膜中离子液体含量增加,复合薄膜更容易在偶件钢球表面形成有效转移薄膜,使复合薄膜摩擦磨损性能得以提高.     

基于光学和扫描显微平台的微尺度实验力学检测技术和装置研究

本文基于光学和扫描显微平台,介绍了本研究组在微尺度实验力学检测技术和设备方面的最新研究成果。在检测技术方面涉及显微散斑干涉技术、微标记阵列检测技术、晶粒变形分析技术、光学探针动静态变形分析技术;在检测系统和装置方面介绍了新近开发的双视场薄膜检测系统、散斑微干涉系统、微标记检测平台、AFM和SEM单轴拉伸装置、三维微定位与加载系统、微力传感器及其标定装置、微动平台驱动装置等。探讨了微尺度实验力学检测中的问题和新的检测技术,给出了一些典型的应用和相关装置。     

A theory of strain-gradient plasticity for isotropic, plastically irrotational materials. Part I: Small deformations

This study develops a small-deformation theory of strain-gradient plasticity for isotropic materials in the absence of plastic rotation. The theory is based on a system of microstresses consistent with a microforce balance; a mechanical version of the second law that includes, via microstresses, work performed during viscoplastic flow; a constitutive theory that allows:

•

the microstresses to depend on , the gradient of the plastic strain-rate, and

•

the free energy ψ to depend on the Burgers tensor .

The microforce balance when augmented by constitutive relations for the microstresses results in a nonlocal flow rule in the form of a tensorial second-order partial differential equation for the plastic strain. The microstresses are strictly dissipative when ψ is independent of the Burgers tensor, but when ψ depends on G the gradient microstress is partially energetic, and this, in turn, leads to a back stress and (hence) to Bauschinger-effects in the flow rule. It is further shown that dependencies of the microstresses on lead to strengthening and weakening effects in the flow rule.Typical macroscopic boundary conditions are supplemented by nonstandard microscopic boundary conditions associated with flow, and, as an aid to numerical solutions, a weak (virtual power) formulation of the nonlocal flow rule is derived.     

不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

氮化钛沉积膜的摩擦性能研究

采用等离子电弧沉积法在9Crl8钢表面制备了厚约0．5μm的TiN薄膜，通过显微硬度测试以及纳米压痕和纳米划痕试验，对比考察了9Crl8钢及其表面T|N薄膜的机械和摩擦性能．结果表明，9Crl8钢及其表面T．N沉积膜的纳米硬度分别为8GPa和38GPa，弹性模量分别为250GPa和580GPa，9Crl8、TiN和有机薄膜的摩擦系数分别为0．40、0．12和0．10；TiN沉积膜可显著提高基体钢的承载和耐磨能力．     

金—稀土合金电刷丝的磨损机理研究

采用扫描电子显微镜、微区电子探针及 X射线光电子能谱等分析测试技术考察了金 -稀土合金电刷丝摩擦副的磨损机理 .结果表明 :该摩擦副的摩擦磨损机理为轻微粘着磨损 ;合金中稀土元素发生偏聚 ;在摩擦升温过程中 ,稀土元素向合金表面扩散富集 ,摩擦副接触表面氧化层不断生成和磨损 ,从而降低电刷丝的表面能 ,使摩擦副的接触表面粘着能降低 ,从而改善其摩擦磨损     

Approximate inertial manifolds for reaction-diffusion equations in high space dimension

The concept of approximate inertial manifolds was introduced by Foiaset al. (1987) in the case of the two-dimensional Navier-Stokes equations. These manifolds are finite dimensional smooth manifolds such that the orbits enter a very thin neighborhood of the manifold after a transient time; this concept replaces the one of inertial manifold when either an inertial manifold does not exist or its existence is not known. Our aim in this paper is to prove that approximate inertial manifolds exist for reaction-diffusion equations in high space dimension by opposition with exact inertial manifolds whose existence has only been proved in low dimension and for which nonexistence results have been obtained in space dimensionn=4.     

形变碳纳米管中水的输运行为研究

水分子通过碳纳米管的运输行为对认识生命的新陈代谢活动、海水淡化和纳米运输器件有着重要的参考作用.本文通过分子动力学的方法研究了水分子通过形变碳纳米管的运输行为,即椭圆柱状碳纳米管的离心率e对管内水分子输运的影响.结果发现椭圆柱状碳纳米管的离心率对管内水分子的偶极矩概率分布、径向函数分布和流量有重要的影响作用.分析认为碳纳米管的形变使管内水分子的偶极矩态及其运输状态发生变化;同时也发现在一定范围内通过改变碳纳米管的形状能起到分子开关的作用.