Cyanex272-P507浸渍树脂协同萃取色层分离铥镱镥的研究

以Cyanex272-P507浸渍树脂采用萃取色层法对铥镱镥富集物进行了吸附和淋洗分离研究,考察了淋洗剂浓度、稀土负载量、淋洗液流速等因素对分离铥镱镥富集物的影响。结果表明,在充填的树脂粒度为0.3~0.6 mm的色层柱中,以0.2 ml.cm-2.min-1进料流速时能得到较大的吸附率;在稀土负载量为树脂重量的0.6%,淋洗液流速为1.0 ml.cm-2.min-1,温度为30℃,装柱树脂高度为400 mm(高径比为25∶1)的条件下,用1.0,1.5,2.0 mol.L-1盐酸梯度淋洗Tm,Yb,Lu,可实现铥镱镥富集物三者的完全分离。     

四烷基锡中性载体推动亚硝酸根离子迁移穿透大块液膜

通过大块液膜体系研究了四烷基锡的碳链长度、载体浓度.NO_2~-浓度及抗衡离子等因素对NO_2~_穿透含四烷基锡的液膜的传质速率的影响,讨论了它们与四烷基锡为载体的离子电极性能间的关系。NO_2~-通过四烷基锡为载体的液膜的迁移规律符合离子对传输模式。     

中性载体阳离子电极膜电化学的计算机数字模拟

对中性载体阳离子电极膜3种可能的传输模式进行了数字模拟,研究了淌度、浓度、配合物稳定常数以及阴离子亲脂性对电极电位响应的影响。模拟结果对于廓清这类电极响应机理,解释有关实验现象及指导新电极设计提供了有用的信息。     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

Thermoanalytical characterization of carbon/carbon hybrid material, Apple Woodceramics

Woodceramics, a carbon/carbon composite of plant-originated carbon reinforced by glassy carbon from phenolic resin, was prepared from apple pomace at carbonizing temperatures of 1073 K (AWC800) and 1473 K (AWC1200), and characterized by thermoanalytical methods and X-ray diffraction (XRD). Simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) showed complicated overlapping reactions similar to those of coal. The initial temperature of pyrolysis was obtained by fitting logistic functions to observed TG data. The results suggested that AWC1200 contained more volatile matter than AWC800. In an inert atmosphere, complicated devolatilization takes place. In an oxidizing atmosphere, thermal change occurs roughly in four steps: desorption of physically adsorbed matter; pyrolysis into aliphatic and aromatic fragments; ignition; combustion of char. The oxidation resistance of AWC1200 was superior to AWC800.     

Synthesis of Some Allyl-β-Cyclodextrin Derivatives and their Properties as Capillary GC Stationary Phases

Summary Three -Cyclodextrin derivatives (-CDs) were synthesized by substituting the 2,6-OH groups of -CD with allyl groups and the 3-OH groups with three different acyl groups (valeryl, heptanonyl, octanoyl). The chromatographic properties of these -CDs as stationary phases for capillary gas chromatography (CGC) were studied. The test results showed that the three -CDs possessed good coating properties and that the capillary columns coated with them exhibited high column efficiency. These -CDs can separate not only the disubstituted benzene isomers but also some racemic compounds.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

FT–IR microspectroscopy study of blends of ester functionalized ethylene–propylene copolymer with (vinylidene fluoride-hexafluoropropene) elastomer

An ethylene—propylene (EPR) copolymer functionalized with (1,2-dicarboethoxy)ethyl groups has been blended with a vinylidene fluoride—hexafluropropene elastomer (NML). The existence of intermolecular interactions involving mainly the carbonyl groups of the side chains of the functionalized copolymer and the methylene hydrogens of the fluoroelastomer through hydrogen bonding was shown by means of FT—IR spectroscopy. The structure and composition of some microdomains in the mixture was examined by means of FT—IR microspectroscopy.     

The effect of ph and gas composition on the bubble fractionation of proteins

Studies were conducted to establish the effect of the variation of environmental factors on the separation occurring in protein systems, resulting from bubble fractionation in a bioreactor. The measure of separation was selected to be the separation ratio. This is defined to be the ratio of either the top or the middle position concentration in the vessel to the bottom concentration of the vessel. Invertase and α-amylase were the two “model” enzymes considered. It was observed that, under certain conditions, i.e., a combination of the nature of the sparging gas and the medium pH, varying degrees of protein separation were achieved. The pH of the system dramatically influenced the separation. It was found that the best separation occurred at a certain pH, assumed to be at or close to thepI of the protein in question. Furthermore, it was observed that systems sparged with CO₂ exhibited greater separation than systems sparged with air. In fact, in the case of invertase, almost threefold separation was observed at the top port when the solution was sparged with CO₂.