气相色谱法测定广藿香油中百秋李醇含量

建立了气相色谱仪测定广藿香油中百秋李醇含量的方法。用毛细管色谱柱DB-5MS（30m×O．32mm．0．25μm）,正十八烷为内标,氢火焰离子化检测器进行检测,内标法定量。百秋李醇含量在0．2-2．0mg／mL范围内,百秋李醇峰面积和内标物峰面积之比与百秋李醇质量浓度呈良好的线性关系,相关系数r=0．9997。方法的检出限为1μg／mL,加标回收率为90．0％～100．6％,测定结果的相对标准偏差为1．22％（n=6）。研究表明,本法简便、快速、测定结果准确可靠,精密度优于外标法。     

大豆油煎炸过程理化指标与LF-NMR弛豫特性的相关性研究

在对大豆油无料/薯条煎炸过程[温度:(180±5)℃,持续36 h]中的酸价(AV)、粘度(V)、吸光值(A)及总极性化合物(TPC)含量等及低场核磁共振(LF-NMR)弛豫特性(峰起始时间T21、T22、T23、相应的峰面积比例S21、S22、S23、单组份弛豫时间T2W)变化规律研究的基础上,利用多元回归分析建立了理化指标与其LF-NMR检测结果的相关性模型,并进行验证。结果表明:大豆油的酸价、TPC含量及S21峰面积均随煎炸时间的延长而线性增大,T21、T22峰起始时间及T2W则随煎炸时间的延长而线性减小(r2>0.90),粘度、吸光值随煎炸时间的延长逐渐增加并符合二项式关系(r2>0.90),而T23峰起始时间及S22、S23与煎炸时间之间无明显规律性变化。煎炸薯条后,油样的酸价、粘度、TPC含量、吸光值及S21均较无料煎炸显著增大(P<0.05),而T21、T22峰起始时间及T2W显著缩短。多元回归分析表明,酸价及TPC含量与T2W、T21,粘度与T2W,吸光值与S21间均可建立良好的相关性模型(R2>0.93)。模型验证合理可靠,可通过油样的LF-NMR检测结果有效预测其理化指标的变化。     

甲基苯基含氢硅油的合成及其热稳定性

以甲基含氢硅油为氢源,在浓硫酸催化下经水解共聚缩合合成了甲基苯基含氢硅油(1),其结构和热稳定性经1H NMR,FT-IR和TGA表征。结果表明,1失重5%的温度为337.42℃。     

绿色合成CdSe及制备CdSe-聚氨酯纳米复合发光材料

通过一步法绿色合成了CdSe-聚氨酯(CdSe-PU)纳米复合发光材料.在N2保护下,将单质硒(Se)溶于蓖麻油,以蓖麻油酸作为氧化镉(CdO)的配体,合成硒化镉(CdSe)纳米晶.将聚丙二醇2000和异佛尔酮二异氰酸酯(IPDI)合成的预聚体,加入含CdSe纳米晶的蓖麻油溶液,通过交联作用得到CdSe-PU纳米复合发光材料.采用紫外-可见分光光度计(UV-Vis)、荧光光谱仪(PL)、傅里叶红外光谱仪(FT-IR)、热重分析仪(TGA)、透射电子显微镜(TEM)对CdSe纳米晶和聚氨酯复合材料的结构和性能进行了表征.结果表明:此方法合成的CdSe纳米晶性能良好,能在聚氨酯纳米复合材料中均匀分散且性能稳定,CdSe-PU纳米复合材料耐热性有所提高.     

Application of solid‐phase microextraction to the determination of polycyclic aromatic sulfur heterocycles in Bohai Sea crude oils

A simple and rapid solid‐phase microextraction approach for the isolation of polycyclic aromatic sulfur heterocycles from the aromatic fraction of crude oil is described. 8‐Hydroxyquinoline silica gel impregnated with palladium chloride was used as a sorbent material for extraction. Operational parameters of the extraction solvents have been evaluated and optimized. Benzothiophene, dibenzothiophene, and benzo[b]naphtho[1,2‐d]thiophene and their C₁–C₄ alkyl derivatives were identified and quantified by GC–MS. Under optimum conditions, the limits of detection for benzothiophene, dibenzothiophene, and benzo[b]naphtho[1,2‐d]thiophene were 0.277, 0.193, and 0.597 μg/g oil, respectively. The recoveries for the polycyclic aromatic sulfur heterocycles ranged from 81.5 to 92.1%, and the linear dynamic range was from 10 to 1000 ng/mL. The developed methodology was tested in the characterization of crude oil samples collected at the DY, SZ, ZH, and HC petroleum oil fields of the Bohai Sea. The results proved that SPE coupled with GC–MS is a promising tool for the quantitative analysis of polycyclic aromatic sulfur heterocycles in crude oils, especially for oil samples with low concentrations of polycyclic aromatic sulfur heterocycles.     

Novel combination of non-aqueous capillary electrophoresis and multivariate curve resolution-alternating least squares to determine phenolic acids in virgin olive oil

This paper presents the development of a non-aqueous capillary electrophoresis method coupled to UV detection combined with multivariate curve resolution-alternating least-squares (MCR-ALS) to carry out the resolution and quantitation of a mixture of six phenolic acids in virgin olive oil samples. p-Coumaric, caffeic, ferulic, 3,4-dihydroxyphenylacetic, vanillic and 4-hydroxyphenilacetic acids have been the analytes under study. All of them present different absorption spectra and overlapped time profiles with the olive oil matrix interferences and between them. The modeling strategy involves the building of a single MCR-ALS model composed of matrices augmented in the temporal mode, namely spectra remain invariant while time profiles may change from sample to sample. So MCR-ALS was used to cope with the coeluting interferences, on accounting the second order advantage inherent to this algorithm which, in addition, is able to handle data sets deviating from trilinearity, like the data herein analyzed. The method was firstly applied to resolve standard mixtures of the analytes randomly prepared in 1-propanol and, secondly, in real virgin olive oil samples, getting recovery values near to 100% in all cases. The importance and novelty of this methodology relies on the combination of non-aqueous capillary electrophoresis second-order data and MCR-ALS algorithm which allows performing the resolution of these compounds simplifying the previous sample pretreatment stages.     

New discrimination method combining hit quality index based spectral matching and voting

A new discrimination method, called hit quality index (HQI)-voting, that uses the HQI for discriminant analysis has been developed. HQI indicates the degree of spectral matching between two spectra as known. In this method, a library sample yielding the highest HQI value for an unknown sample was initially searched and a group containing this sample was chosen as the group for the unknown sample. When overall spectral features of two groups are quite close to each other, many library samples with similar HQI values could be available for an unknown sample. In this situation, the simultaneous consideration of multiple votes (several library samples with close HQI values) for final decision would be more robust. In order to evaluate the discrimination performance of HQI-voting, three different near-infrared (NIR) spectroscopic datasets composed of two sample groups were used: (1) domestic and imported sesame samples, (2) domestic and imported Angelica gigas samples, and (3) diesel and light gas oil (LGO) samples. For the purpose of comparison, principal component analysis–linear discriminant analysis (PCA–LDA), partial least squares–discriminant analysis (PLS–DA) as well as k-nearest neighbor (k-NN) were also performed using the same datasets and the resulting accuracies were compared. The discrimination performances improved with the use of HQI-voting in comparison with those resulted from PCA–LDA and PLS–DA. The overall results support that HQI-voting is a comparable discrimination method to that of existing factor-based multivariate methods.     

Development of a manual method for the determination of mineral oil in foods and paperboard

So far the majority of the measurements of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) were obtained from on-line high performance liquid chromatography–gas chromatography–flame ionization detection (on-line HPLC–GC–FID). Since this technique is not available in many laboratories, an alternative method with more easily available tools has been developed. Preseparation on a small conventional liquid chromatographic column was optimized to achieve robust separation between the MOSH and the MOAH, but also to keep out the wax esters from the MOAH fraction. This was achieved by mixing a small portion of silica gel with silver nitrate into highly activated silica gel and by adding toluene into the eluent for the MOAH. Toluene was also added to the MOSH fraction to facilitate reconcentration and to serve as a keeper preventing loss of volatiles during solvent evaporation. A 50 μl volume was injected on-column into GC–FID to achieve a detection limit for MOSH and MOAH below 1 mg/kg in most foods.     

Oil Base Mud. Part I: Synthesis of Some Local Surfactants Used as Primary Emulsifiers for Oil Base Mud and Evaluation of Their Rheology Properties

Six oil soluble nonionic surfactants with different HLBs have been prepared. Their HLBs situate between 3.9 and 6.7. Transesterification was carried out for glycerol and triethanol amine with oleic acid at different moles to obtain six emusilifiers. They named glycerol momooleate (I), glycerol diooleate (II), glycerol trioleate (III), triethanol amine mono-, di- and tri-oleate (IV), (V,) and (VI). The chemical structure was confirmed using; the elemental analysis, FTIR and ¹HNMR. They were evaluated as a primary emulsifiers (PE) for thdrilling fluids (oil base mud) comparing with a currently used primary emulsifier (Fc). The water in oil base mud (w/o emulsions) was prepared. The concentration of emulsifiers and their HLB exhibited interesting rheology properties including shear-thinning behavior, yield value, viscoelastic effects, thixtropy, gel strength, and filtration loss. The rheology properties of such emulsions strongly depended on the average size distribution of the dispersed droplets that could be varied both with the bulk concentration and HLB value of the emulsifiers. The interfacial and surface properties of these emulsifiers suggest that the droplet size of the dispersed phase and bulk concentration are strongly related to the HLB value of emulsifiers. The w/o emulsion (mud formulation) stability is sensitive to the droplet size of the dispersed phase and HLB value of the used emulsifier. The results were discussed on the light the chemical structure of the primary emulsifiers and the emulsion ingredients.     

Synthesis and Characterization of Self-Assembling Some Thiol Surfactants on Gold Nanoparticles

The purpose of this work is to study the self-assembling of some synthesized thiol surfactants namely (mercaptopropane-, mercaptohexane-, mercaptooctane-, and mercaptodecane sodium sulfonate) on the fabricated gold nanoparticles. The self-assembling of these surfactants on gold nanoparticles characterized using different techniques such as FTIR spectroscopy, UV spectroscopy, and transmission electron microscopy (TEM). Spectroscopic evidence suggests that the synthesized thiol surfactants have been attached to the gold nanoparticles. The effect of self-assembling of these surfactants on the size of the gold nanoparticles was studied using TEM images. The growth of the gold nanoparticles was investigated with respect to the increase of alkyl chain in the synthesized thiol surfactants. The results show that the stabilization of gold nanoparticles was affected by the increase in alkyl chain length of these surfactants. The effect of gold nanoparticles on the interfacial tension and the emulsion stability of these surfactants with crude oil was studied.