甲烷在SrO-La2O3/CaO催化剂上的氧化偶联Ⅱ.反应动力学的研究

在２０％Ｌａ２Ｏ３／ＣａＯ（ＬＣ）催化剂中添加ＳｒＯ（添加ＳｒＯ的ＬＣ以ＳＬＣ表示）明显地提高了反应活性和Ｃ２选择性。反应动力学研究表明，ＬＣ和ＳＬＣ催化剂在甲烷氧化偶联反应中，在表观活化能和表观反应级数上存在很大的差异。ＬＣ催化剂在ＣＨ４转化以及Ｃ２和ＣＯｘ形成过程中，表观活化能大于ＳＬＣ催化剂，而ＳＬＣ催化剂的指前因子小于ＬＣ体系，两者存在着补偿形象。ＳＬＣ催化剂的反应速率常数比ｋｃ２／ｋＣＨ     

Structure of Low Temperature Phase b-Ba_3Y(BO_3)_3 Crystal

1 INTRODUCTION Recently the series of compounds M3Ln(BO3)3 (M = Sr, Ba and Ln = LaLu, Sc, Y) with space group P63cm or -3R have been reported[1～5], and some of them exhibit interesting optical properties when doped with the active Cr3+ or Yb3+ ions as laser materials. For example, Yb3+-doped Sr3Y- (BO3)3 crystal is a promising laser material for both tunable and femtosecond laser applications[6～8]. The Ba3Y(BO3)3 crystal melts congruently at 1256 ℃ and has a phase transitio…     

Hydraulic activity of C4A3Cr in presence of C4A3S

This paper deals with synthesis and assessment of the hydraulicity of C₄A₃Cr, analog phase C₄A₃S to , relevant to the phase chemistry and properties of sulfoaluminate cements. C₄A₃Cr, synthesized at 1250 °C is well crystallized phase, latently hydraulic, with hydration accelerated in the presence of C₄A₃S, or CS. Calorimetric curves show reciprocal influence of sulfate and chromate phase in hydration of C₄A₃S-C₄A₃Cr system. The total heat expressed at hydration is nearly the same for all specimens, but the rate of heat evolution depends on the ratio of C₄A₃S/C₄A₃Cr phases. X-ray diffraction pattern and DTA curves showed that, increasing content of C₄A₃Cr in hydrating mixture results in a coexistence of two types of ettringite (chromate and sulfate ettringite) hydrogarnet, gibbsite and monosulfate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

L-谷氨酸、甘氨酸二元、三元体系中铽(Ⅲ)、钙(Ⅱ)的化学形态研究

在模拟生理条件下 (37℃ ,I=0 .1 5mol/ L Na Cl) ,用 p H电位法研究了铽 ( )、钙 ( )与 L-谷氨酸、甘氨酸二元、三元体系。确定了体系存在的物种 ,测定了体系中配合物的稳定常数。讨论了上述二元、三元体系中铽 ( )、钙 ( )的物种分布特点。     

甲烷氧化偶联催化反应的特征

应用程序升温反应（ＴＰＲ）及质谱分析表征了ＣａＯ，Ｓｍ２Ｏ３，０．５－１０％Ｓｍ／ＣａＯ催化剂上的甲烷氧化偶联反应特性。谱图分析表明，在４００－１０００℃范围内，甲烷氧化偶联反应产物的变化呈现三个反应温度区域：（１）完全氧化区，反应主要为ＣＨ３·在催化剂表面完全氧化形成ＣＯｘ和Ｈ２：（２）偶联区，主要为ＣＨ３·的氧化和偶联竞争反应，Ｈ２谱线出现明显的低温峰；（３）氧耗尽区，反应为高温气相反应，产物     

磷肥和硒施用对稻米硒、钙、锌等营养累积的影响

研究了施用不同水平磷肥和硒对稻米中硒、钙、锌、镁、硫等人体必需营养吸收累积的影响。结果表明，适量施磷，降低米中硒含量；大量施磷，又促进硒在米中累积。施磷肥一般不利于钙和锌在稻米中累积，适量施磷增加稻米中镁、硫含量，而过量施用磷肥显著降低钙、锌、镁、硫等矿质营养的含量，影响稻米营养品质。适量施硒，一般提高稻米的矿质营养含量；过量施硒，特别在高磷水平下则降低矿质营养含量。     

含有羧基配体的蝎型钒氧配合物的合成、结构及其热分解动力学

设计合成了两种新型的以聚吡唑硼酸盐、氨基酸为配体的钒氧配合物VO[phCH2CH(NH2)COO][HB(pz)3](1)和VO(3,5-Me2pz)[HB(3,5-Me2pz)3](CH3COO)(2). 通过元素分析、红外光谱对配合物进行了表征, 并利用单晶X射线衍射技术解析了它们的结构. 非等温热分解动力学研究表明, 配合物1和2的热分解反应都是分两步进行的. 通过计算, 配合物1热分解的第一步反应的可能机理为成核与生长(n=1/4); 第二步反应的可能机理为化学反应. 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1/4)(1-α)[-ln(1-α)]-3 和dα/dT=(A/β)e-E/RT(1-α)2. 分解反应的表观活化能分别是223.52 和331.94 kJ·mol-1; 指前因子ln(A/s-1)分别是49.67 和57.50. 配合物2 热分解的第一步反应的可能机理为化学反应; 第二步反应的可能机理为成核与生长(n=1/2). 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1-α)2, 和dα/dT=(A/β)e-E/RT(1/2)(1-α)[-ln(1-α)]-1. 分解反应的表观活化能分别是300.56 和444.72 kJ·mol-1; 指前因子ln(A/s-1)分别是75.53 和92.50.     

盐卤硼酸盐化学──ⅩⅩⅧ.氯柱硼镁石的激光拉曼光谱

本文研究了氯柱硼镁石硼酸和硼砂的晶体和它们在水溶液中的激光拉曼光谱，并与某些阴酸盐的谱图进行对比．初步提出硼氧配阴离子的聚合形式，为进行氯柱硼镁石结构分析提供实验依据．