Simultaneous multichannel mass-specific detection for high-performance liquid chromatography using an array detector sector-field mass spectrometer

The use of a separation step, such as liquid chromatography, prior to inductively coupled plasma mass spectrometry (ICP–MS) has become a common tool for highly selective and sensitive analyses. This type of coupling has several benefits including the ability to perform speciation analysis or to remove isobaric interferences. Several limitations of conventional instruments result from the necessity to scan or pulse the mass spectrometer to obtain a complete mass spectrum. When the instrument is operated in such a non-continuous manner, duty cycle is reduced, resulting in poorer absolute limits of detection. Additionally, with scanning instruments, spectral skew can be introduced into the measurement, limiting quantitation accuracy. To address these shortcomings, a high-performance liquid chromatograph has been coupled to an ICP–MS capable of continuous sample introduction and simultaneous multimass detection. These features have been realized with a novel detector array, the focal plane camera. Instrument performance has been tested for both speciation analysis and for the elimination of isobaric interferences. Absolute limits of detection in the sub picogram to tens of picograms regime are obtainable, while the added mass dimension introduced by simultaneous detection dramatically increases chromatographic peak capacity.     

Automatic sugar analysis in the beet industry. Part I: Parameter optimization of a reversed phase HPLC carbohydrate determination

An evaluation of the most commonly used HPLC system (reversed phase octadecyl sillica gel) was undertaken in order to determine the level of certain carbohydrates in molasses produced in the refining of sugar beet. Chromatographic parameters and purification operations prior to analysis are discussed in order to develop an analytical method permitting automation of sugar determination. A Zorbax ODS column (250 × 9.4 mm), water elution, and light scattering detection allow easy determination of glucose + fructose, sucrose, and raffinose in molasses using an internal standard (maltose).     

Fluorometric detection with a packed flow cell in micro high-performance liquid chromatography

Summary A packed flow cell was used for fluorometric detection in micro high-performance liquid chromatography. The flow cell consisted of fused-silica tubing packed with the same material as the separation column. A focusing effect of the stationary phase on the signal intensity was observed, leading to an improvement of the mass detection limit, as achieved by on-column detection.     

Electron capture detector performance parameters in view of the response presentation forms

Summary Four most frequently used presentation forms of the ECD response are described. Equations describing the dependence of the sensitivity, linearity and minimum detectable concentration of the ECD working under constant frequency mode of operation on the pulse period are derived from Wenthworth’s kinetic model for all four forms mentioned above. The forms presented are compared on the basis of equations derived. Results of the calculations are given and some predictions are experimentally tested for sulphur hexafluoride. Good agreement was found between the predicted and observed relationships. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

High-performance liquid chromatography with continuous gradient elution in screening for unknown metabolites of butoprozine directly in dog bile

This paper describes the screening for metabolites of butoprozine, a new anti-anginal drug, in dog bile by means of reverse-phase HPLC. Although it does involve a simple clean-up step to remove a substantial amount of endogenous bile compounds, this screening method nevertheless avoids extraction of metabolites and thus allows all metabolites to be introduced into the chromatographic system. A single run of 100 minutes from 100% water to 100% methanol in a linear gradient effects adequate separation of the great majority of metabolites without interference from remaining endogenous compounds. Two methods of differentiating between metabolite peaks and endogenous peaks have been worked out. The first one makes use of ¹⁴C-labeled butoprozine by measuring the amount of radioactivity in the column effluent while simultaneously recording the UV absorbance. The second method compares continuous gradient chromatograms of bile recorded before and after butoprozine administration under very similar conditions. The latter method can be applied to both radioactive and non-radioactive materials.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.     

Detection ofFusarium trichothecenes (nivalenol,deoxynivalenol, fusarenone and 3-acetyldeoxynivalenol) by high-performance liquid chromatography

Summary Separation and determination ofFusarium trichothecenes: nivalenol, deoxynivalenol, fusarenone and 3-acetyldeoxynivalenol, were carried out by highperformance liquid chromatography with UV detection, and methanol—water (30/70) as mobile-phase on Lichrosorb RP-18 column. Detection limits were 2, 3, 3 and 5ng per injection of nivalenol, deoxynivalenol, fusarenone and 3-acetyldeoxynivalenol, respectively. The method appears to be adequate for detection of the above trichothecenes in contaminated corn and rice as well as in cultures ofFusarium spp. A preliminary TLC purification was necessary for detection of fusarenone in corn.     

反相高效液相色谱分离-安培法检测酚类化合物

本文报道了RP-HPLC-安培法检测测定酚类化合物的条件。在Shim-pack CLC-C_8柱上用含0.05mol/L NaH_2PO_4缓冲溶液的5％甲醇水溶液洗脱分离,于E+1.0V处检测。线性范围在0～7μg/ml,检测限达ng/ml。     

Analysis of organomercury compounds in sediments by capillary GC with atomic fluorescence detection

Analysis of methyl- and ethylmercury (MM and EM) halides in biological and environmental samples is generally performed by gas chromatography with electron capture detection. Tedious sample work-up protocols and poor chromatographic response (using packed columns) have, however, shown the need for the development of new methods in this field. This paper reports a sensitive method, free from these deficiencies, for the determination of methyl- and ethylmercury. The organomercury compounds (MM and EM) are first released from the sample matrix, by the combined action of acidic potassium bromide and cupric ions, and then extracted into dichloromethane. The initial extracts are subjected to thiosulfate clean-up and the organomercury species are isolated as their chloride derivatives by addition of cupric chloride, and subsequent extraction into a small volume of organic solvent. Capillary GC coupled with atomic fluorescence detection provided excellent separation efficiencies for methyl- and ethylmercury and proved to be a very selective and sensitive technique. The absolute detection limit for both MM and EM was found to be 0.2 pg.     

Increased electrochemical detector sensitivity by electrode surface modification

Summary Electrode surface modification by electrochemical pretreatment of glassy carbon electrodes was shown to enhance significantly the sensitivity of the electrodes for the detection of timolol and oxprenolol, but reduce slightly the sensitivity to prenalterol. This method may permit the detection of exprenolol and timolol with increased sensitivity, or may allow their detection at lower applied potentials than is presently possible. Electrode surface modification may prove to be a valuable aid to the detection of compounds that are considered to be outside the practical limits of electrochemical detection.