警惕锌剂治疗的毒性和副作用

临床实践证明某些疾病补锌治疗有效，但也发现1％左右的人出现副作用，人类对锌过量虽具有耐受性，但据报道不管是急性中毒量，治疗量，还是常用的自选补充量，均可出现中毒症状。原因是锌与其它元素间有相互作用，特别是与铜的拮抗作用，所以用锌剂一定要严格掌握适应症、剂量、疗程，以免引起不良反应，影响儿童健康。     

1,2,2-Trimethyldisilane-1,1,2-triol: intermediate formation and conversion to condensation products

1,2,2-Trimethyldisilane-1,1,2-triol (1) is formed as an unstable intermediate upon hydrolysis of oligo(trimethyldisilanylsesquiazane). In the absence of trapping agents it undergoes rapid condensation to give ether-soluble poly(trimethyldisilanyloxane) which contains silanol groups. Treatment of the hydrolysis products with chlorotrimethylsilane in the presence of triethylamine affords trimethylsiloxy derivatives, (Me₃SiO)₂MeSiSiMe₂(OSiMe₃),5,6, and [Si₂Me₃O _x (OSiMe₃) _y ] _n . The isolation of these products indicates that disilanetriol1 readily undergoes condensation to form hydroxylcontaining six-membered rings and polysiloxanes. The condensation of compound1 in the presence of Me₃SiOH has been studied. The ratio between the isomeric cyclosiloxanes5 and6 has been determined both by¹H NMR spectroscopy and by a chemical method (chlorinolysis). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1788–1792, October, 1993.     

聚合物系统中的传能和光化学

评论了聚合物系统中非辐射能量传递类型,影响能量传递的因素,以及能量传递同聚合物光化学的关系,附22篇文献。     

Thermodynamics of the dissociation of 2-aminopyridinium ion in synthetic seawater and a standard for pH in marine systems

Buffer solutions composed of 2-aminopyridinium chloride and 2-aminopyridine in synthetic seawater are useful as a supplement to buffers of Tris (pH 8.2) and Bis (pH 8.8) in standardizing measurements of hydrogen ion concentration (pm _H or pH(SWS)) in oceanography. The dissociation constant of 2-amino-pyridinium ion over the range of salinities (S) from 30 to 40 has now been determined from the emf of cells without liquid junction at eight temperatures (T) from 278.15 to 313.15 K. The results fit the equation pK=2498.31/T–15.3274+2.4050 lnT+S(0.012928–2.9417×10^–5T) with a standard deviation of 0.0023. Thermodynamic constants for the dissociation process and standard reference values of pm _H and pH(SWS) were derived from the data. The pm _H of the buffer consisting of 2-aminopyridinium chloride and 2-aminopyridine (each 0.04 molal) in synthetic seawater of salinity 35 varies from 7.356 at 278.15 K to 6.601 at 313.15 K.     

A Kinetic Evidence for the Nitroxyl Radicals Recycling Mechanism in the Photostabilizing Process of HALS

The photoinduced bulk polymerization of a reactive-hindered amine fight stabilizers(r-HALS), 4-acryloyl-2, 2, 6, 6-tetramethylpiperidinyl (ATMP), was performed at 80℃ by using a DPC technique. An unique periodic exponential attenuation-type oscillating curve was found when the polymerization was carried out in air, but this phenomenon was not found in nitrogen.It is supposed that this unique kinetic performance may be attributed to nitroxyl radicals that are produced in situ from the oxidation of ATMP. ATMP polymer with narrow polydispersity (d =1.03) can be obtained by photoinduced solution polymerization of ATMP. The signal detected in ESR may be assigned to the nitroxyl radicals in the matrix of ATMP polymer. Since this kind of recycling of nitroxyl radicals is well documented for the photostabilizing mechanism of HALS, the present results may serve as a kinetic evidence for this mechanism.     

Optical biosensor for pharmaceuticals, antibiotics, hormones, endocrine disrupting chemicals and pesticides in water: Assay optimization process for estrone as example

Certain contaminants at trace concentrations in surface waters can have dramatic effects on the hormonal system of organisms in the aquatic environment. Therefore, immunoanalytical methods at a very low limit of detection (LOD) and a low limit of quantification (LOQ) are becoming more and more important for environmental analysis and especially for monitoring drinking water quality. Environmental monitoring of antibiotics, hormones, endocrine disrupting chemicals, and pesticides in real water samples (e.g. surface, ground or drinking water) with difficult matrices places high demands on chemical analysis. Biosensors have suitable characteristics such as efficiency in allowing very fast, sensitive, and cost-effective detection. Here we describe an assay optimization process with a fully automated immunoassay for estrone which resulted in a LOD below 0.20 ng L⁻¹ and a LOQ below 1.40 ng L⁻¹. In contrast to common analytical methods such as GC-MS or HPLC-MS, the biosensor used requires no sample pre-treatment and pre-concentration. The very low validation parameters for estrone are the result of the continuous optimization of the immunoassay. The basis of our sensitive assay is the antibody with a high affinity constant towards estrone. During the optimization process, we reduced the amount of antibody per sample and improved the chip surface modification. Finally, this proceeding led to a calibration routine with an amount of antibody of only 3.0 ng per sample (sample volume: 1.0 mL). The reduction of the amount of antibody per sample results in better validation parameters (LOD, LOQ, and IC₅₀), but this reduction leads to the current device-related limitation of the River Analyser (RIANA).For some endocrine disrupting compounds, no effect levels (NOELs) in the lower nanogram per liter range are reported. This defines the challenge, which analytical methods have to compete with and our RIANA instrument with its improved sensitivity for the detection of a single hormone in the lower nanogram per liter range is a powerful tool in aquatic analytics in addition to the common analytical methods.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

C12-s-C12·2Br与低碳醇混合水溶液胶团化行为的温度效应和焓/熵补偿

季铵盐Gemini表面活性剂C12-s-C12·2Br(s=2,3,4,6)与丙醇、丁醇、戊醇、己醇混合水溶液的In(cmc)随温度升高而逐渐增大.计算所得热力学数据表明,C12-s-C12·2Br与醇混合胶团化过程服从熵驱动机理,也出现了焓/熵补偿现象.随着温度上升,熵驱动力增大,在指定温度时,醇分子烷烃链上碳原子数n增大使△Gm0值减小,胶团结构更加稳定;而增加s使值增大,胶团稳定性下降.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

低共熔混合锂盐相图的绘制及应用

采用热分析法对不同组成的混合锂盐二元体系进行研究, 绘制了混合锂盐体系的步冷曲线和T-x相图, 结果表明体系均为具有最低共熔点的二元体系. LiOH-LiNO3、LiOH-LiCl、LiOH-Li2CO3及LiNO3-LiCl体系的最低共熔点分别为175.7、294.5、418.2及221.6 ℃. 利用低共熔混合物LiNO3-LiOH为锂盐与不同前驱体反应, 制备出了层状结构良好的锂离子电池正极材料LiNiO2、LiNi0.8Co0.2O2及LiNi1/3Co1/3Mn1/3O2. X射线衍射分析表明, 合成的材料具有规整的层状NaFeO2结构, 且XRD衍射峰强度之比I(003)/I(104)>2.0, 电性能测试表明, 在2.7-4.3 V(vs Li/Li+)的电压范围内进行0.1C倍率充放电, LiNiO2、LiNi0.8Co0.2O2、LiNi1/3Co1/3Mn1/3O2首次充电比容量分别达168.0、225.4、194.0 mAh·g-1, 放电比容量分别为138.4、165.8、157.7 mAh·g-1.