白术挥发油中苍术酮氧化反应的动力学

白术挥发油;苍术酮;动力学方程;活化能;反应机理     

Mechanistic aspects of the Wolff-Kishner reaction. V. The cation effect on the reaction of benzophenone hydrazone in butyl carbitol and decyl alcohol

The rate of the Wolff-Kishner reaction of benzophenone hydrazone in butyl carbitol increases as the cation of the alkoxide base is varied in the order K>Na>Li>Mg. The replacement of butyl carbitol by 1-decanol also accelerates the reaction, and an additional increase is caused by the presence of crown ether. On the basis of changes in the activation parameters, it is concluded that the reactivity of the hydrazone anion increases as the contact ion pair becomes more fully solvated and dissociated.     

Methylmethacrylate complexes of sterically hindered aluminum aryloxides: activation of methacrylic esters

The interaction of AlR₂(BHT)(OEt₂) and AlMe(BHT)₂ with methylmethacrylate (MMA) leads to the formation of the Lewis acid-base complexes AlR₂(BHT)(MMA) [R = Me (1), Et (2)] and AlMe-(BHT)₂(MMA) (3), respectively. The molecular structure of 1 has been determined by X-ray crystallography. The decrease in the C=O and C=C stretching frequencies in the IR spectrum, and downfield shift in the ¹³C NMR spectrum of the - and γ-carbons of the MMA, when compared to free MMA, is presented with respect to the activator ability of sterically crowded aryloxide compounds of aluminum to aluminum-porphyrin catalyzed (Inoue) polymerization of MMA.     

硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Theoretical prediction of the contact distance dependence of the electron transfer reactivity of the ClO/ClO− coupling system

On the basis of the structures and properties of the ClO/ClO^? system obtained at the density functional theory (DFT) (UB3LYP) level, employing the 6‐311+G(3df) standard basis set, the electron transfer reactivity of this system is investigated. The results indicate that there are five possible stable coupling complexes that correspond to the generous minima on the global potential energy surfaces (PES). The most stable coupling complex is planar EC4, in which there is a O? O linkage with two trans‐Cl atoms. Their stabilization energies are calculated to be 20.57 (EC1: C₁), 20.54 (EC2: C₂, ²B), 20.69 (EC3: C₁), 20.70 (EC4: C_s, ²A′), and 20.69 (EC.5: C_2h, ²B_u) kcal/mol at the B3LYP/6‐311+G(3df) level; with the correction of the basis set superposition error (BSSE), the stability order of these encounter complexes is EC4 > EC.5 > EC3 > EC1 > EC2. Based on the five encounter complexes, five coupling modes are designed for the study of the electron transfer reactivity of this system. The dissociation energy curves at the activated states and the corresponding activation energies of these five coupling modes are obtained and are compared at the B3LYP/6‐311+G(3df) and MP2/6‐311+G* levels. The inapplicability of DFT methods has also been discussed in this article in predicting the energy curves, especially with a long contact distance, in which DFT methods give the abnormal behavior for the dissociations of the complexes caused by the “inverse symmetry breaking” problem. On the basis of the golden rule of the time‐dependent perturbation theory, the electron transfer reactivity and the contact distance dependence of the various electron transfer kinetics parameters (e.g., activation energy, coupling matrix element) have been analyzed at the UMP2(full)/6‐311+G* level. The electron transfer can take place over a range of contact distances, but the most effective coupling distance corresponds to only a small range. The coupling orientation analyses also indicate that the most favorable coupling mode to the electron transfer does not always correspond to the most stable encounter complex mechanism. Some highly energetic coupling modes are more favorable for the electron transfer. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．     

Thermal Studies on Ionic Derivatives of Hafnium(IV) Involving Maltol Ligand

A number of ionic chelate complexes of maltol(A) and hafnium(IV) the type[(η₅−C₅H₅)₂HfL]⁺[MCl3]⁻ (B) [HL=maltol; M=Zn(II), Cd(II), Hg(II), Cu(II)]have been synthesized and characterized by spectral studies (IR, UV, ¹H NMR and ¹³C NMR). The stoichiometry of the complexes has been confirmed by conductance measurements. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes and from TG curves, the order, apparent activation energy and apparent activation entropy of the thermal decomposition reactions have been elucidated .The order in each case has been determined to be one and the degree of spontaneity and lability have been inferred from the apparent activation energy and entropy, respectively. Thermal parameters have been correlated with some structural aspects of the complexes concerned. From differential thermal analysis curves, the heat of reaction has been calculated. This revised version was published online in August 2006 with corrections to the Cover Date.