超声提取-毛细管气相色谱法检测酱腌菜中对羟基苯甲酸酯

采用超声提取法提取酱腌菜中的对羟基苯甲酸甲酯、对羟基苯甲酸乙酯及对羟基苯甲酸丙酯,在SE30毛细管柱(33 m×0.53 mm,2.65μm)上得到了良好分离。对羟基苯甲酸甲酯、对羟基苯甲酸乙酯及对羟基苯甲酸丙酯在0～750μg/mL浓度范围内与色谱峰面积呈良好的线性关系,相关系数为0.9999。对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸丙酯的检出限分别为0.1,0.1,0.2μg/mL,测定结果的相对标准偏差小于3.6%(n=11),平均回收率为84.5%～97.1%。     

基于丙烯酸-丙烯酰胺共聚物的氧化铟锡蚀刻油墨的制备与性能

以丙烯酸（AA）、丙烯酰胺（AM）为单体,采用水溶液聚合法制备了低黏度聚（丙烯酸-丙烯酰胺）P（AA—Co—AM）树脂。使用旋转黏度计和热重分析仪等测试了树脂的性质,并以该树脂为连接料,制备了新型水性氧化铟锡（ITO）蚀刻油墨。探讨了该油墨的保水性、pH变化和蚀刻图像解析度等。结果表明：通过优化合成工艺可制备分子量适宜的P（AA—CO—AM）树脂,它在150℃以下无分解现象;油墨在使用3h后失水率仅为3．68％-5．34％,存放60d后pH基本无变化,且丝网印刷效果明显好于市售油墨。     

Controlled loading and release of methylene blue from LbL polyurethane/poly(acrylic acid) film

The layer‐by‐layer (LbL) assembled multilayer films are widely used in the biomedical field for the controlled drug delivery. Here, multilayer films were assembled by LbL technique through alternating deposition of cationic polyurethane (PU) and poly(acrylic acid) (PAA) on glass slides. Methylene blue (MB) was used as a model drug to investigate the loading and release ability of the prepared multilayer film. The results showed that the loading rate and loading amount of MB were greatly influenced by pH value of the dye solution, and the release rate of MB was controlled both by ionic strength and pH value of immersing solution. The result also indicated that the film had a good reversibility of drug loading and release. It suggested that the PU/PAA multilayer film had potential applications in drug delivery and controlled release. Copyright © 2011 John Wiley & Sons, Ltd.     

阴离子交换离子色谱法测定乳酸催化制备的丙烯酸

通过乳酸催化脱水制备丙烯酸具有良好的应用前景。为了对其中的催化过程进行有效、及时的监控,建立了一种同时测定乳酸及丙烯酸的阴离子交换色谱法(AEC)。选择Metrohm A Supp 5阴离子交换柱(150 mm×4.0 mm),以2 mmol/L Na2CO3+2 mmol/L NaHCO3混合水溶液为流动相,采用化学抑制电导检测技术,乳酸和丙烯酸在6 min内即可实现完全分离。乳酸和丙烯酸工作曲线的线性范围分别为0.1～500 mg/L和0.1～200 mg/L,检出限分别为0.030 mg/L和0.035 mg/L,加标回收率分别为100.7%～106%和99.6%～103%,相对标准偏差分别为2.16%~2.49%和2.42%~2.48%。该方法准确、快速、灵敏、重现性好。     

Controlled polymerization of acrylic acid under 60Co irradiation in the presence of dibenzyl trithiocarbonate

The polymerization of acrylic acid (AA) was performed under ⁶⁰Co irradiation in the presence of dibenzyl trithiocarbonate at room temperature, and well‐defined poly(acrylic acid) (PAA) with a low polydispersity index was successfully prepared. The gel permeation chromatographic and ¹H NMR data showed that this polymerization displays living free‐radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n = 1.07–1.22), controlled molecular weight, and constant chain‐radical concentration during the polymerization. Using PAA? S? C(?S)? S? PAA as an initiator, the extension reaction of PAA with fresh AA was carried out under ⁶⁰Co irradiation, and the results indicated that this extension polymerization displayed controlled polymerization behavior. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3934–3939, 2001     

Effects of acrylic acid incorporation on the pressure–temperature behavior and the calorimetric properties of poly(N-isopropylacrylamide) in aqueous solutions

 We studied the effects of pH on the pressure–temperature dependence of coil–collapse transition for aqueous solutions of copolymers of N-isopropylacrylamide and acrylic acid (Ac). At low pressures, the transition temperature (T _tr) increased with pressure, but T _tr decrease with increasing pressure at pressures higher than 50–100 MPa. By increasing the pH, the transition contour shifted to a higher temperature. When the Ac content was increased, the effects of pH became more evident. From a calorimetric study at atmospheric pressure, ΔH _tr was found to become smaller by increasing the portion of the ionized residues in the copolymer. The ratio to the van't Hoff enthalpy changes became larger with an increase in pH, which indicated that the production of charge decreased the cooperative domain size. Received: 19 July 1999 /Accepted in revised form: 7 September 1999     

Synthesis of Conjugated Systems Based on 3-(5-Methylfur-2-yl)-2-(3-oxobutyl)benzofurans

Methods were developed for the synthesis of 3-butyl-2-(3-oxobutenyl)benzofurans and 3-(3-furylbenzofuran-2-yl)acrylic acids on the basis of 3-furyl-2-(3-oxobutyl)benzofurans.     

High‐Resolution Separation of Oligo(acrylic acid) by Capillary Zone Electrophoresis

Summary: Oligo(acrylic acid)s, produced by RAFT polymerization, have been separated and analyzed for the first time by capillary zone electrophoresis. The resolution obtained by capillary electrophoresis in borate buffers is far higher than that currently achieved using size exclusion chromatography. This work demonstrates that capillary electrophoresis is the technique of choice for the characterization of oligomers of acrylic acid and of other water‐soluble monomers involved in emulsion polymerization processes.

Electropherograms of different acrylic acid (AA) oligomers obtained by CZE.     

Synthesis of Citric Acrylate Oligomer and Its In-Situ Reaction with Chrome Tanned Collagen (Hide Powder)

Summary: The purpose of this study was to formulate the new combined system of acrylic and citric acids, which was prepared by free radical polymerization and esterification reaction at the same time to form citric-acrylate CAC oligomer. The presumable chemical structure of this oligomer and the reaction mechanism were investigated by different spectroscopic tools (¹H,¹³C-NMR and ATR-IR), GPC and TGA/DTA. The effect as masking agent of the eco-friendly oligomer (CAC) in the chrome tanning of the collagen and the pickling of the hide was approached by the study of the hydrothermal and mechanical properties of in-situ treated/grafted chrome tanned collagen (hide powder) and pickled hide, respectively. The use of citric acrylate CAC oligomer instead of the traditional strong acids resulted in significant improvement in chrome exhaustion and physical properties of the leather.     

Nanofibrous Membranes Containing Carbon Nanotubes: Electrospun for Redox Enzyme Immobilization

Summary: Nanofibrous membranes that possess reactive groups are fabricated by the electrospinning process from PANCAA solutions that contain MWCNTs. Field emission scanning electron microscopy is used to evaluate the morphology and diameter of the nanofibers. Potentials for applying these nanofibrous membranes to immobilize redox enzymes by covalent bonding are explored. It is envisaged that the electrospun nanofibrous membranes could provide a large specific area and the MWCNTs could donate/accept electrons for the immobilized redox enzymes. Results indicate that, after blending with MWCNTs, the diameter of the PANCAA nanofiber increases slightly. The PANCAA/MWCNT nanofibrous membranes immobilize more enzymes than that without MWCNTs. Moreover, as the concentration of the MWCNTs increases, the activity of the immobilized catalase is enhanced by about 42%, which is mainly attributed to the promoted electron transfer through charge‐transfer complexes and the π system of MWCNTs.

The covalent immobilization of redox enzymes, such as catalase, on a PANCAA/MWCNTs nanofiber.