茶汤及河水中铁的形态分析

本文采用阳离子交换、活性炭分离－光度法研究了铁的形态分离及测定条件，建立了铁的形态分析方法。应用此法测定了茶汤及河水中铁的总量、悬浮态、溶解态、无机态、有机态、Ｆｅ（Ⅲ）和Ｆｅ（Ⅱ）等形态，结果令人满意。     

Interaction of gas phase atomic hydrogen with Pt(111):Direct evidence for the formation of bulk hydrogen species

Employing hot tungsten filament to thermal dissociate molecular hydrogen,we generated gas phase atomic hydrogen under ultra-high vacuum(UHV)conditions and investigated its interaction with Pt(111) surface.Thermal desorption spectroscopy(TDS)results demonstrate that adsorption of molecular hy- drogen on Pt(111)forms surface Had species whereas adsorption of atomic hydrogen forms not only surface Had species but also bulk Had species.Bulk Had species is more thermal-unstable than surface Had species on Pt(111),suggesting that bulk Had species is more energetic.This kind of weakly- adsorbed bulk Had species might be the active hydrogen species in the Pt-catalyzed hydrogenation reactions.     

Photocrosslinking of copolymers of vinyloxyethyl methacrylate–styrene initiated by sulfonium salts. I. Transient species formed on photolysis of sulfonium salt

Benzyl cation was detected by transient absorption spectroscopy with a spectroscopic multichannel analyzer on pulse excitation (fourth harmonic of Nd:YAG laser, 266 nm; 10 ns fwhm) of benzyl(4-hydroxyphenyl) methylsulfonium hexafluoroantimonate(BSS) in 1,2-dichloroethane (EDC). The benzyl cation was long-lived (lifetime, 59 ms) at room temperature and quenched by a vinyl ether compound. The formation of the benzyl cation as active species on photolysis of BSS is in contrast to the formation of Brønsted acids in other sulfonium salts so far reported. © 1992 John Wiley & Sons, Inc.     

甲烷氧化偶联W-Mn/SiO2催化剂上O2-脉冲频率效应(PFE)的研究

采用频率脉冲反应方法,以Mn-Na2WO4/S iO2催化剂上甲烷氧化偶联为探针反应,通过实时、原位的四极质谱检测手段,研究氧物种对甲烷C-H键选择性活化的微观历程.首次发现了Mn-Na2WO4/S iO2催化剂上O2-脉冲频率效应,即脉冲反应产物量随氧脉冲注入频率的增加而增加.研究结果表明,在反应条件下,Mn-Na2WO4/S iO2催化剂上有两种活化甲烷的氧物种同时存在,它们活化甲烷的方式不同。     

载镍沸石上NH3-TPD脱附峰的非酸性探讨

NH_3-TPD技术表征固体催化剂的酸性似乎已很成熟,其实不然。如该技术表征HZSM-5沸石时,有作者观察到773K左右的高温脱氨峰,而有些作者则检测不到。诚然,各作者间所用试样及预处理条件等存在差异,但实验装置和实验操作条件不同带来的影响也不可忽视。此外,该技术在用于表征一些新的较复杂的催化剂时,其程脱谱也会呈现出新现象,这些现象有时是不能通过酸性来解释的,这是因为NH_3作为探针分子不仅具有碱性,同时还有还原性和配位性。本文对载镍沸石上NH_3-TPD谱图中出现的某些新峰进行了剖析和归属。     

STUDIES OF MULTICOMPONENT COMPLEX OXIDE CATALYSTS FOR OXIDATIVE COUPLING OF METHANE VI.SURFACE BASICITY AND SURFACE ACTIVE OXYGEN SPECIES OF LiTi_xLa_(1-x)O_2 λ MULTICOMPONENT OXIDE CATALYSTS

The surface basicity of Ti-La-Li multicoinponent oxides has been investigated by means of CO2-TPD. The experiment results show that C2 (C2H6 C2H4) selectivity is related to surface basic strength. The surface active oxygen species have also been characterized by means of XPS, O2-TPD and so on. It has been indicated that C2 selectivity and CH4 conversion are correlated with lattice oxygen and the adsorbed oxygen on the surface of the catalyst respectively In the O2-TPD experiments, it has also been found that there are three kinds of oxygen species on the surface of the series catalvsts, which are a (100℃ 750℃) Among them α-oxvgen causes deep oxidation whileβand γ oxygen species are related to oxidalive coupling of methane (OCM).     

Separation of chlamydosporol epimers by reversed-phase HPLC using commercial solvent optimisation software

Summary Two epimers of the mycotoxin chlamydosporol were separated by HPLC on an RP-18 column using a quaternary mobile phase consisting of water (79.1%), methanol (10.0%), acetonitrile (10.4%) and tetrahydrofuran (0.5%), with a flow rate of 1 ml min^–1. This optimal composition of mobile phase, with which the resolution value for the two epimers (1 and2) was 2.73 with retention times of 5.88 and 7.12 min, respectively, was achieved by the application of Philips Solvent Optimisation Software PU 6100. The presence of free silanols on the stationary phase was shown to be an essential requirement for the separation of the chlamydosporol epimers.     

The kinetics of reaction of 4-nitrophenylnitromethane with N’-Propyl-N,N-dipropylbenzimidamide in aprotic solvents. a steric effect on tunneling

Thermodynamic and kinetic parameters have been established for the reaction between the carbon acid, 4-nitrophenylnitromethane, (4-NPNM), and the base N’-n-propyl-N,N-di-n-propylbenzimidamide, (N’PDPBA), in mesitylene and in chlorobenzene. In some cases deuteron transfer from 4-(D₂)NPNM to the base has also been studied. In addition, some results for the proton transfer reaction in tetrahydrofuran have been collected. Spectrophotometric methods have been employed to monitor the ion-pair product, which is solvatochromic. In general the solvent dependence of the parameters is as expected, but there is some indication of specific solvation. The kinetic isotope effects of 11 and 8 in mesitylene and chlorobenzene, respectively, are larger than those predicted classically. However, as is discussed the n-propyl group on the secondary nitrogen of the base may serve to reduce the extent of tunneling compared to that in an unsubstituted analogue by a steric effect.     

Intrinsic Surface Reaction Constant in 1-pK Model of Mg-Fe Hydrotalcite-like Compounds

The relationship among intrinsic surface reaction constant (K) in 1-pK model, point of zero net charge (PZNC) and structural charge density (σst) for amphoteric solid with structural charges was established in order to investigate the effect of σst on pK. The theoretical analysis based on 1-pK model indicates that the independent PZNC of electrolyte concentration (c) exists for amphoteric solid with structural charges. A common intersection point (CIP) should appear on the acid-base titration curves at different c, and the pH at the CIP is pHPZNC. The pK can be expressed as pK=-pHPZNC log[(1 2αPZNC)/(1-2αPZNC)], where αPZNC≡σst/eNANs, in which e is the elementary charge, NA the Avogadro‘s constant and Ns the total density of surface sites. For solids without structural charges, pK=-pHPZNC. The pK values of hydrotalcite-like compounds (HTlc) with general formula of [Mg1-xFex(OH)2](Cl,OH)x were evaluated. With increasing x, the pK increases, which can be explained based on the affinity of metal cations for H^- or OH^- and the electrostatic interaction between charging surface and H^- or OH^-.     

Determination of Inorganic Arsenic Species by Electrochemical Hydride Generation Atomic Absorption Spectrometry with Selective Electrochemical Reduction

A new direct procedure for the determination of inorganic arsenic species was developed by electrochemical hydride generation atomic absorption spectrometry （EcHG-AAS） with selective electrochemical reduction. The determination of inorganic arsenic species is based on the fact that As（Ⅲ） shows significantly higher absorbance at low electrolytic currents than As（Ⅴ） in 0.3 mol·L^-1 H2SO4. The electrolytic current used for the determination of As（Ⅲ） without considerable interferences of As（Ⅴ） was 0.4 A, whereas the current for the determination of As（Ⅲ） and As（Ⅴ） was 1.2 A. For equal concentrations of As（Ⅲ） and As（Ⅴ） in a sample, the interferences of As（Ⅴ） during the As（Ⅲ） determination were smaller than 5%. The absorbance for As（Ⅴ） could be calculated by subtracting that for As（Ⅲ） measured at 0.4 A from the total absorbance for As（Ⅲ） and As（Ⅴ） measured at 1.2 A, and then the concentration of As（Ⅴ） can be obtained by its calibration curve at 1.2 A. The methodology developed provided the detection limits of 0.3 and 0.6 ng·mL^-1 for As（Ⅲ） and As（Ⅴ）, respectively. The relative standard deviations were of 3.5% for 20 ng·mL^-1 As（Ⅲ） and 3.2% for 20 ng·mL^-1 As（Ⅴ）. The method was successfully applied to determination of soluble inorganic arsenic species in Chinese medicine.