Synthesis of multi-hydroxyl and sulfonyl dual-functionalized room temperature ionic liquids

Starting from the hydroxylamine (dimethyl amino ethanol, triethanolamine) and 1,3-propane sultone, a series of hydroxyl and sulfonyl dual-functionalized zwitterionic salts and corresponding acidic room temperature ionic liquids have been synthesized. The hydroxyl groups of the synthesized substances were confirmed by the 1H NMR measurement. These zwitterionic salts and ionic liquids may be used for synthesizing other functionalized ionic liquids or ionic liquid-polymer (polyelectrolyte).     

Analysis of citrates and benzoates used in poly(vinyl chloride) by supercritical fluid extraction and gas chromatography

Supercritical fluid extraction (SFE) has been demonstrated to be a useful tool in the determination of additives in polymeric materials. This paper describes the determination of some citrates and benzoates in poly(vinyl chloride) blended with 33–34% of plasticizer using off-line SFE followed by gas chromatography. Experimental factors affecting SFE have been studied by gravimetric analysis, followed by analysis of the extracts using a gas chromatograph equipped with a flame ionization detector. The extraction process is governed by the solubility of the plasticizers in the supercritical fluid or by their diffusion through the polymer matrix, which depend on the pressure and temperature used. Maximum extraction (>99%) is obtained at pressures and temperatures higher than 40 MPa and 80 °C, respectively. Due to purge losses, the collection efficiency of plasticizers into a liquid solvent ranges from 85 to 90%. The applicability of the SFE method is demonstrated using real samples and comparing the results with those obtained by conventional Soxhlet extraction.     

MOLECULAR ENGINEERING STUDIES ON NONTHROMBOGENIC BIOMATERIALS——A NOVEL CLASS OF NONTHROMBOGENIC BIOMATERIALS WITH ZWITTERIONIC STRUCTURE OF CARBOXYBETAINES

N,N-dimethyl-N-methacryloyloxyethyl-N-carboxyethyl ammonium (DMMCA) was graft-copolymerized onto the surface of segmented poly(ether urethane) (SPEU) and PE film. The carboxybetaine structure on SPEU and PE film surfaces was confirmed by ATR-FTIR, XPS and water contact angle measurements. Through the experiments with platelet adhesion and protein adhesion assay in vitro, the two materials studied, including poly-DMMCA gel, all show excellent nonthrombogenicity. This confirms once again that the zwitterionic molecular structure on the surfaces of materials is essential for improving their nonthrombogenicity and biocompatibility.     

Separation of structural isomers using cyclodextrin-polymers coated on silica beads

Summary Several -cyclodextrin (CD)-bonded stationary phases for high performance liquid chromatography (HPLC) were prepared, based on silica beads coated with a poly(alkylamine), [poly(ethyleneimine)(PEI)]. In order to obtain stationary phases with a high content of CD and maximum accessibility of the CD cavity, the functionalization was carried out after the coating, using the mono-tosyl derivative of CD as the intermediate. The ability of these supports to separate ortho, meta and para isomers of some disubstituted benzene derivatives was examined. The contribution of the amino groups of the polymer and of the CD cavity to the separation process is discussed. The resolution is mainly based on the difference in the stability of the complexes of the various isomers with CD. The influence of the amount of CD on the height of the theoretical plate is also studied.     

Fluorinated organic chemicals: Prospects in New Electrochemical Energy Technologies

This contribution has been partly adapted from a special lecture intended to commemorate the Nobel prize, awarded one century ago, to Henri Moissan. It, is focused on fluorinated and perfluorinated molecules and macromolecules used in electrochemical energy sources, i.e. storage and conversion of energy. The latter, which figure indisputably among New Energy Technologies, include lithium batteries and fuel cells based on polymeric membranes both of which have tremendous development potential in terms of performances, safety and cost reductions. The advantages inherent in fluorine, in particular its electron-withdrawing effect and the oxidation stability that it provides to the carbon-fluorine bond, make it an asset in the search for new organic molecular and macromolecular anions with extensive delocalization of the negative charge, usable both in lithium batteries and fuel cells. As for fluorinated and perfluorinated macromolecule backbones, they are currently the reference material in fuel cell ionomeric membranes but some of them are also good candidates for use in lithium-ion batteries. This paper, far from being exhaustive, also emphasizes the economic aspects that influence material selection and also govern the future of basic research.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

Synthesis of zwitterionic block copolymers via RAFT polymerization

A series of poly [2-(dimethylamino)ethyl methacrylate (DMA)-sodium acrylate (SA)] diblock copolymers were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. The polymerization exhibits controlled characters: well-controlled molecular weight, narrow molecular weight distribution, molecular weight increasing with polymerization time. The zwitterionic diblock copolymers show rich solution behaviors. Dynamic light scattering (DLS) indicated the formation of micelles and reverse micelles of copolymers is affected by net charge density of copolymers. Microcalorimetry studies showed that the lower critical solution temperature (LCST) increases with incorporation of hydrophilic segments in buffer.     

Helical unwinding in polymer-dispersed ferroelectric liquid crystals

We demonstrate that ferroelectric liquid crystals dispersed in a polymer matrix can form uniaxially aligned elliptical droplets. The alignment is controlled by mechanical shear during the polymerization of a UV-curable adhesive. The possibility of prealignment makes polymer-dispersed ferroelectric liquid crystals suitable for application in flexible electro-optical displays. In contrast to surface stabilized ferroelectric liquid crystal displays, the electro-optical effect in our system is due to the deformed-helix ferroelectric (DHF) effect.     

两性孪联表面活性剂的合成及溶液性质

用C10～C16脂肪醇与2-氯-2-氧-1,3,2-二氧磷杂环戊烷低温反应生成环状磷酸酯的中间产物,再用N,N-二甲基十二胺在亲核溶剂中65℃下开环反应合成了4种含N 和磷酸根阴离子的两性孪联表面活性剂C10-C12、C12-C12、C14-C12和C16-C12,其质量收率分别为32%、54%、18%和28%。产物的结构通过1HNMR和元素组成分析,表明两性离子表面活性剂C、H、O、N的分析值与理论计算值偏差不超过0.3%。四种表面活性剂的临界胶束浓度(cmc)在0.0072~0.0125mmol/L之间,临界胶束浓度时表面张力(γcmc)依次为23.90、25.61、27.68和36.08mN/m。其中,C10-C12、C12-C12和C14-C12有较好的界面活性,加入盐可以使表面活性剂与烷烃间的界面张力下降,但下降程度有限,不能达到超低界面张力(10-3mN/m)。     

Zwitterionic titanoxanes {Cp[η-C5H4B(C6F5)3]Ti}2O and {(η-PrC5H4)[η-1,3-PrC5H3B(C6F5)3]Ti}2O as catalysts for cationic ring-opening polymerization

Zwitterionic titanoxanes {Cp[η⁵-C₅H₄B(C₆F₅)₃]Ti}₂O (I) and {(η⁵-ⁱPrC₅H₄)[η⁵-1,3-ⁱPrC₅H₃B(C₆F₅)₃]Ti}₂O (II), which contain two positively charged Ti(IV) centres in the molecule, are able to catalyse the ring-opening polymerization of -caprolactone (-CL) in toluene solution and in bulk. The process proceeds with a noticeable rate even at room temperature and accelerates strongly on raising the temperature to 60 °C. The best results have been obtained on carrying out the reaction in bulk. Under these conditions, the use of I as a catalyst (-CL:I = 1000:1) gives at 60 °C close to quantitative yield of poly--CL with the molecular mass of 197 000. An increase in the -CL:I ratio to 6000:1 increases the molecular mass of poly--CL to 530 000. Tetrahydrofuran (THF) is also polymerized under the action of I albeit with a lesser rate. However, the molecular mass of the resulting poly-THF can reach rather big values under optimal conditions (up to 217 000 at 20 °C and the THF:I ratio of 770:1). A rise in the reaction temperature from 20 to 60 °C results here to a decrease in the efficiency of the process. Titanoxane II is close to I in its catalytic activity in the -CL polymerization but it is much less active in the polymerization of THF. Propylene oxide (PO), in contrast to -CL and THF, gives with I only liquid oligomers in wide temperature and PO:I molar ratio ranges (−30 to +20 °C, PO:I = 500–2000:1). γ-Butyrolactone and 1-methyl-2-pyrrolidone are not polymerized under the action of I at room temperature. The reactions found are the first examples of catalysis of the cationic ring-opening polymerization by zwitterionic metallocenes of the group IVB metals.