Degradation process in organic thin film devices fabricated using P3HT

The stability of regioregular poly(3-hexylthiophene 2,5-diyl) (P3HT) thin films sandwiched between indium tin oxide (ITO) and aluminium (Al) electrodes have been investigated under normal environmental conditions (25°C and RH∼45–50%). Electrical and optical properties of ITO/P3HT/Al devices have been studied over a period of 30 days. Mobility μ of the order of 10⁻⁴ cm²/V-s has been obtained from the V ² law in the as-deposited P3HT films. Scanning electron microscopy (SEM) investigations show blistering of Al contacts in devices with a poly(3,4-ethylenedioxythiophene) (PEDOT) interlayer on application of voltage whereas no blistering is seen in devices without PEDOT. The results have been explained in terms of trap generation and propagation and the moisture-absorbing nature of PEDOT.      

类锂铝复合机制产生X光激光的等离子体状态

本文从速率方程出发,讨论了类锂铝复合等离子体的激发态结构,衰减常数,反转率和小信号增益等表征介质增益特性的物理量以及它们随电子温度,电子密度和光子逃逸几率的变化。找到了进行类锂铝离子通过复合机制产生X光激光设计应创造的等离子体状态目标区域。还讨论了这些物理量随原子序数变化的定标律。     

五种氨基酸钆络合物的ESR波谱

迄今未见任何稀土氨基酸络合物的ESR波谱报道,本文在合成Gd³⁺分别与甘氨酸、β-丙氨酸、谷氨酸、天冬氨酸和天冬酰胺五种氨基酸络合物的基础上,测定了不同温度下,水溶液、粉末及分子筛吸附样品的ESR谱,讨论了络合物中晶体场强,对称性及成键特性。     

Darstellung und Molekülstrukturen von oligofunktionalen Dirheniumcarbonylderivaten aus Dirheniumnonacarbonylphosphan

Preparation and Molecular Structures of Oligofunctional Dirhenium Carbonyl Derivatives from Dirhenium Nonacarbonylphosphane Starting with dirheniumdecacarbonyl, one CO-Ligand was eliminated oxidatively and substituted by the labile acetonitrile ligand. As an intermediate eq-Re₂(CO)₉NCCH₃ was received. The reaction of this labilised carbonyl with tris(trimethylsilyl)phosphine and subsequent methanolysis gave ax-Re₂(CO)₉PH₃, which was isolated and characterized for the first time. Photochemical and thermal reaction of ax-Re₂(CO)₉PH₃ led to the new bi- and trinuclear complexes Re₂(μ-H)(μ₃-PHRe(CO)₅)(CO)₈, Re₂(μ-PH₂)₂(CO)₈ and Re₂(μ-H) · (μ-PH₂)(CO)₈, which were characterized by IR-, ¹H- and ³¹P-NMR spectroscopy. The structures of ax-Re₂(CO)₉PH₃, Re₂(μ-H)(μ₃-PHRe(CO)₅)(CO)₈ and Re₂(μ-PH₂)₂(CO)₈ were confirmed by single-crystal X-ray analysis. ax-Re₂(CO)₉PH₃ has a very short Re? P bond length of 228(2) pm.     

新型的不锈钢镀Pt（Ir）电极

应用欠电位沉积与锚定效应，研制了一种新型的不锈钢镀Ｐｔ（Ｉｒ）电极，此电极具有优越的电化学特性，可望用于微传感器。     

Stochastic resonance in perspective

Summary We outline the historical development of stochastic resonance (SR), a phenomenon in which the signal and/or the signal-to-noise ratio in a nonlinear system increase with increasing intensity of noise. We discuss basic theoretical ideas explaining and describing SR, and we review some revealing experimental data that place SR within the wider context of statistical physics. We emphasize the close relationship of SR to some effects that are well known in condensed-matter physics. Paper presented at the International Workshop ?Fluctuations in Physics and Biology: Stochastic Resonance, Signal Processing and Related Phenomena?, Elba, 5–10 June 1994.     

Approximation of a laminated microstructure for a rotationally invariant,double well energy density

Summary. We give error estimates for the approximation of a laminated microstructure which minimizes the energy for a rotationally invariant, double well energy density . We present error estimates for the convergence of the deformation in the convergence of directional derivatives of the deformation in the “twin planes,” the weak convergence of the deformation gradient, the convergence of the microstructure (or Young measure) of the deformation gradients, and the convergence of nonlinear integrals of the deformation gradient. Received July 25, 1995 / Revised version received November 20, 1995     

Behavior of zirconium in the ZrOW(100) system at high temperature, studied by ISS, AES and work-function measurements

The behavior of zirconium atoms at the W(100) surface associated with oxygen adsorption at different sample temperatures has been studied by Auger electron spectroscopy (AES), ion scattering spectroscopy (ISS), and the relative change of the work function (Δф) measured by the onset of the secondary electron energy distribution. The results have revealed: (i) adsorption of zirconium onto the W(100) surface followed by the elevation of the sample temperature up to 1710 K in an oxygen partial pressure of 2.7 × 10⁻⁴ induces complete diffusion of zirconium atoms into the W(100) substrate; (ii) further exposure of oxygen induces co-existence of oxygen and tungsten on the surface at 1710 K, resulting in a work function of 4.37 eV; (iii) keeping the sample temperature at 1710 K, simple evacuation of the system has resulted in surface segregation of zirconium atoms to the surface to form a zirconium atomic layer on the top-most surface, reducing the work function to 2.7 eV. The results have revealed that this specific behavior of zirconium atoms at high temperature assures, with very good reproducibility, the highly stable performance and long service life of Zr---O/W(100)-emitters in practical use, even in a low vacuum of 10⁻⁶ Pa.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Pattern forming precipitation in gels due to coupling of chemical reactions with diffusion

Precipitate-forming chemical reactions have been studied in chemically cross-linked poly(vinyl alcohol) gel medium. One of the reactive components was incorporated into the gel, the other was allowed to diffuse into it. Depending on the experimental conditions the reaction-diffusion process often results in patterns of different type. Experiments performed in tubes and in thin layers were carried out in order to investigate the effects of various factors (cross-linking density, swelling degree as well as the concentrations of the outer and inner electrolytes) on the morphologies of the precipitate patterns. It was found that precipitation occurs not only in the Liesegang bands, but also between bands. Beside Liesegang-type structures, tree-like patterns have been observed, showing a characteristic periodicity in the density profile obtained by digitalized image analyses.