Multi-syringe flow injection system with in-line microwave digestion for the determination of phosphorus

A multi-syringe system for spectrophotometric determination of total phosphorus involving in-line digestion is proposed. Sample and digestion solution were dispensed and directed towards a digestion vessel located inside a domestic microwave oven (MWO) where sample digestion took place. Afterwards, the digested sample was merged with the necessary reagents for the colorimetric determination based on the molybdenum blue method. Several digestion conditions were studied regarding composition of digestion solution, digestion time and power set on the MWO. The system was applied to waste water samples and results shown a good agreement with the reference method. Repeatable results (R.S.D.<2.41%) and determination frequency of 12 h⁻¹ were obtained.     

Denitrogenation of acrylonitrile-butadiene-styrene copolymers using polyethylene glycol/hydroxides

Alkaline hydrolysis of acrylonitrile-butadiene-styrene (ABS) copolymers has been systematically investigated to demonstrate the use of reaction systems based on polyethylene glycol (PEG)/hydroxides for N-elimination from ABS. The structure of denitrogenated ABS has been characterized using elemental analysis, FTIR, ¹H-NMR, and solid state ¹³C CP-MAS NMR, indicating sequential hydrolysis as a plausible mechanism of elimination of N from ABS. The effects of reaction conditions such as solvent selection, reaction temperature, alkaline species and concentration, as well as PEG molecular weight were evaluated. At optimal conditions (THF, PEG600, 4.3 wt % of NaOH), as much as 93.1% of the original nitrogen content of ABS was removed in 2 h at 160 °C, while it is only 35.6% without PEG. This clearly demonstrates the high-efficiency of a PEG/hydroxides catalytic system for denitrogenation of ABS, stressing the potential of this method for denitrogenation of other N-containing polymers.     

A kinetic study of lipase-catalyzed alcoholysis of palm kernel oil

The use of lipases as biocatalysts in interesterification reactions has been the object of growing interest, owing to the importance of esters as emulsifiers, intermediates to produce oleochemicals, and fuel alternatives. We consider in this article a kinetic study of lipase-catalyzed alcoholysis of palm kernel oil, using n-hexane as the solvent. In a first step the ester production was maximized by using a Taguchi design, and then an empirical model was built to determine the influence of the process variables. Taking into account the results obtained in the first step, we performed a kinetic study and developed a simple model for this system.     

Optimization of nickel adsorption from aqueous solution by using activated carbon prepared from waste apricot by chemical activation

Waste apricot supplied by Malatya apricot plant (Turkey) was activated by using chemical activation method and K₂CO₃ was chosen for this purpose. Activation temperature was varied over the temperature range of 400-900 °C and N₂ atmosphere was used with 10 °C/min heat rate. The maximum surface area (1214 m²/g) and micropore volume (0.355 cm³/g) were obtained at 900 °C, but activated carbon was predominantly microporous at 700 °C. The resulting activated carbons were used for removal of Ni(II) ions from aqueous solution and adsorption properties have been investigated under various conditions such as pH, activation temperature, adsorbent dosage and nickel concentration. Adsorption parameters were determined by using Langmuir model. Optimal condition was determined as; pH 5, 0.7 g/10 ml adsorbent dosage, 10 mg/l Ni(II) concentration and 60 min contact time. The results indicate that the effective uptake of Ni(II) ions was obtained by activating the carbon at 900 °C.     

食用调和油是否变质的快速检验

如何在家快速检验外观尚无变化的食用调和油是否变质？根据食用调和油酸败变质的原因和产物,结合已有的专业检验方法,通过大量的对比实验,找到了简单易行的快速检验方法,即以白醋作溶剂,用碘化钾淀粉试纸检测食用调和油是否变质。     

离子色谱-抑制型电导检测法同时测定食品级润滑油中的3种无机阴离子

建立了离子色谱-抑制型电导检测同时测定食品级润滑油中Cl^-、NO₃^-、SO₄^2- 3种代表性无机阴离子的方法。样品经50%(v/v)甲醇水溶液超声提取,离心后所得下层水相用0.22 μm混合纤维过滤膜净化,以15 mmol/L KOH溶液为淋洗液,采用抑制型电导检测器进行检测,外标法定量。在上述条件下,Cl^-、NO₃^-、SO₄^2- 3种无机阴离子在0.10~20.00 mg/L范围内具有良好的线性关系(R²>0.999);检出限(S/N=3)为0.01~0.03 mg/kg;在1.00、5.00、10.00 mg/kg添加水平下,实际样品中3种阴离子的加标回收率为90.0%~103.6%,相对标准偏差为2.8%~5.7%。结果表明,该方法无需燃烧、灰化油相基质等繁琐耗时的前处理过程,可以快速、准确定量测定食品级润滑油中Cl^-、NO₃^-、SO₄^2- 3种无机阴离子的含量,适用于润滑油等油品中痕量无机阴离子的同时分离与测定。     

气流吹扫-注射器微萃取-全二维气相色谱法用于原油组分的表征

建立了气流吹扫-注射器微萃取（GP-MSE）与全二维气相色谱/飞行时间质谱（GC×GC/TOFMS）联用分析原油成分的方法。为了找到适用于原油样品分析的GP-MSE条件,用饱和烃混合标准溶液和15种芳烃的混合标准溶液进行了条件优化,得到的最佳条件如下:取样量5 mg、萃取溶剂正己烷20 μ L、载气流速2 mL/min、加热时间3 min、加热温度300 ℃、冷凝温度-2 ℃。处理后的样品在全二维色谱/飞行时间质谱上进样分析,得到了满意结果。方法的检出限为34~93 μg/L,线性相关系数（R²）>0.99,对50种烃类化合物的回收率在82.0%~107.3%之间,相对标准偏差<10%（n=5）。结果表明GP-MSE-GC×GC/TOFMS法是一种新型绿色、高效、灵敏的分析方法,非常适合原油中挥发性与半挥发性组分的分析。     

气相色谱-负化学源质谱联用法测定水产品及食用油中氟乐灵的残留量

建立了一种可用于水产品及食用油中氟乐灵残留量分析的分散型固相萃取-气相色谱-负化学离子源质谱方法。水产品及食用油经乙腈提取,4 ℃冷藏后,采用分散型固相萃取法净化,由气相色谱-负化学离子源质谱选择离子监测技术进行测定与确证,同位素内标法定量。在1~40 μg/L范围内氟乐灵农药的线性关系良好;方法定量限（LOQ）为0.02 μg/kg;对鳗鱼、烤鳗、梭子蟹、小龙虾、猪油和橄榄油等6种复杂基质进行1.0、2.0和3.0 μg/kg等3个水平的添加回收试验,平均回收率均处于80%~100%之间,RSD≤10.3%;无干扰现象出现。该方法可作为水产品及食用油中氟乐灵残留检测的确证方法。     

几类食品掺伪的化学检验

化学分析法是掺伪食品鉴别检验的基础。给出乳及乳制品、蜂蜜、食用油、粮食谷物及调味品中常见掺伪物质的化学检验法,操作简便,在家庭或一般化学实验室即可完成。     

GC-MS法鉴别食用油和餐饮业中废弃油脂的研究

用气相色谱 质谱联用(GC MS)方法对7种餐饮业中废弃油脂(简称废油脂)和5种合格成品食用油(简称食用油)中所有脂肪酸进行分析。研究发现,废油脂中部分不饱和脂肪酸受到氧化,使脂肪酸相对不饱和度(U R)值明显小于同种类食用油中的脂肪酸相对不饱和度(U R)值,其脂肪酸的质量分数分布与同种类的食用油中脂肪酸的质量分数分布有很大的区别,以及绝大部分废油脂中存在较大量矿物油。研究表明,脂肪酸相对不饱和度(U R)值和脂肪酸的质量分数分布可以鉴别废油脂。