A Novel High Active TiO2/AC Composite Photocatalyst Prepared by Acid Catalyzed Hydrothermal Method

A high active novel TiO2/AC composite photocatalyst was prepared and used for phenol degradation. It was much more active than P-25 and exhibiting good decantability, less deactivation after several runs and less sensitive to pH change. Diffuse reflectance spectra (DRS) revealed that the electronic change in TiO2 did not occur by the addition of AC. Results of SEM and XRD suggested that better TiO2 distribution can be achieved when optimal AC content was adopted. The performance of the prepared TiO2/5AC catalyst revealed great practical potential in wastewater treatment field.     

高强度聚乙烯醇/聚苯胺/聚吡咯/TiO2导电杂化水凝胶的制备与性能

本文以聚乙烯醇(PVA)、苯胺(ANI)、吡咯(Py)及钛酸丁酯(TBOT)为原料,通过溶胶-凝胶法、原位氧化聚合法及冷冻-融溶法一步得到聚乙烯醇/聚苯胺/聚吡咯/TiO 2(PVA/PANI/PPy/TiO 2)杂化水凝胶。结果表明,该杂化水凝胶具有优异的力学性能和导电性能。当n(ANI)∶[KG-*3/5]n(Py)=8∶[KG-*3/5]2(TBOT体积为100μL)时,其压缩强度高达2.45 MPa。同时,在外加电源的作用下,该凝胶能够使灯泡发光。当n(ANI)∶[KG-*3/5]n(Py)=2∶[KG-*3/5]8(TBOT体积为150μL)时,杂化水凝胶的电导率(0.25 S/m)最好。该杂化水凝胶有望广泛地应用在柔性可穿戴电子器件、安全离子电池、传感器和生物器件等领域。     

STUDY ON OXID TIVE COUPLING OF METHANE Ⅱ.CATALY TIC PERFORMANCE AND CHARACTERIZATION OF TiO_2-BASED CATALYSTS

The catalytic performance of Mn/TiO_2,La-Mn/TiO_2,Li-La-Mn/TiO_2 etc for the oxidetive coupling of methane(OCM)was investignted.Thecatalysta were cheracterised with X-ray diffraction(XRD)and X-rayphotoelectron spectroscopy(XPS).The results reveal that catalyst Li-La-Mn/TiO_2 exhibits high activity and C_2 selectivity;Ti in this catalyst exists asTi~( 4) state;Li can promote the formation of lanthanum tituate via theinteraction between La and TiO_2;the formed La_2Ti_2O_7 and La_4Ti_9O_(24) aredistributed in the inner surface layer and Mn exists in outer surface layer in lowvalence states.The high activity and C_2 selectivity of catalyst Li-La-Mn/TiO_2are intimately related to the valence states of Mn,Li,La and theirdistribution on the catulyst surface layer.     

负载型纳米二氧化钛对重金属离子吸附性能的研究

采用溶胶-凝胶法制备二氧化钛溶胶, 将其浸渍在硅胶上, 合成了负载型纳米二氧化钛材料, 以X射线衍射(XRD)、扫描电镜(SEM)等手段对其进行了表征. 以ICP-AES为检测手段, 系统地研究了负载型纳米TiO₂材料对重金属离子Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的吸附性能. 结果表明, 在pH 8～9范围内, 所研究的重金属离子均可被定量富集, 吸附的金属离子可用0.5 mol/L的HNO₃完全解脱. 负载型纳米二氧化钛对Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的静态吸附容量分别为8.3, 13.1, 12.6和5.1 mg/g, 与未负载的纳米二氧化钛相近. 将其应用于环境标准样品中Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的分离富集与测定, 结果满意.     

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^3＋ Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.     

Pt/TiO_2催化剂上的氢—氧作用 Ⅰ.氢、氧的吸咐—脱附行为以及相互促进作用

本文采用程序升温脱附(TPD)技术研究了光沉积方法制备的Pt/TiO_2催化剂经过氧化、还原后氧、氢的脱附行为.光沉积过程中,Pt/TiO_2表面上可以生成大量的吸咐氢,在TPD中脱附;同时Pt/TiO_2表面上化学吸附的水在TPD过程中也可以分解释氢.氧化处理的Pt/TiO_2在TPD过程中于550～750K温区出现氧脱附峰,随着氧化温度升高,脱附峰位向高温移动,经实验证明,这种可脱附活泼氧物种的生成是由样品前身中留存氢引起的.还原处理的Pt/TiO_2在TPD过程中分别在300～600和大于600K出现两个氢脱附峰,认为是由于表面羟基和钛—氢(Ti~(4+)—H~-)物种的分解释氢引起的Pt/TiO_2上活泼氧物种的存在,增加了样品在室温条件下的吸氢量;在中温(473～573K)这种活泼氧物种则和氢发生反应,减少了TPD过程中的脱氢量;Pt/TiO_2在大于673K温度还原,可以消除活泼氧物种的影响.     

Pt/TiO_2催化剂上的氢—氧作用——Ⅱ. 程序升温还原和程序升温氧化研究

本文采用TPR、TPO技术分别考察了氧处理Pt/TiO_2上氧物种的还原行为和氢还原样品的氧化过程.TPR结果表明,表面含有活泼氧物种的Pt/TiO_2样品对氢很活泼,室温条件下可以吸附大量氢,并且这些吸附氢又可以在TPR过程中脱附.表面活泼氧物种与氢的反应温度在500—673K之间,当大于673K时,Pt/TiO_2继续耗氢,可能是氢与还原产生的表面Ti~(3+)离子进一步反应生成钛—氢物种,并向TiO_2体相扩散与TiO_2体相晶格氧发生反应.对于773K还原的Pt/TiO_2作品,室温吸附氧在TPD过程中可以与表面吸附氢反应;473K氧化处理可以消除表面的吸附氢,但并不能完全去除体相储氢;573K氧化处理则基本上恢复了原样品的氧化状态.不同温度氢还原处理的Pt/TiO_2样品在动态氧化过程(TPO)中,在300-600K温区,气相氧与样品上表面吸附氢和表面氧空位反应;在大于600K温区,氧主要与表面钛—氢物种发生反应,并向体相扩散,与体相氢发生反应.文中描述了气相氢、氧分别与Pt/TiO_2催化剂存在的氧或氢物种作用的形式.     

Das erste Titanat mit „Stuffed Pyrgoms”︁: RbNa3Li12[TiO4]4 = RbNa3Li8{Li[TiO4]}4

The First Titanate with ?Stuffed Pyrgoms”?: RbNa₃Li₁₂[TiO₄]₄ = RbNa₃Li₈{Li[TiO₄]}₄ By heating a well grounded mixture of the binary oxides Rb₂O, Na₂O, Li₂O, and TiO₂ [Rb:Na:Li:Ti = 1.1:3.1:12.5:4.0; 780°C, 41 d] we obtained RbNa₃Li₈{Li[TiO₄]}₄ as colourless platelike crystals. This first titanate with ?stuffed pyrgoms”? is isostructural with RbNa₃Li₈{Li[SiO₄]}₄, CsKNa₂Li₈{Li[SiO₄]}₄ and CsKNaLi₉{Li[SiO₄]}₄ [2]. The compound crystallizes tetragonal I4/m with a = 1 125.8(1) pm and c = 652.4(1) pm (Guinier-Simon-Data, Z = 2). The structure was determined by four-cyrcle-data (Siemens AED2, MoK) and leds to the residual values R = 3.7% and R_w = 3.1% (additional data see text). The Madelung Part of Lattice Energy (MAPLE), Effective Coordination Numbers (ECoN), Mean Fictive Ionic Raddii (MEFIR) and the Charge Distribution in Solids (CHARDI) are calculated and discussed.     

聚苯胺/二氧化钛复合薄膜的制备及其气敏性能

室温条件下, 运用静电力自组装和原位化学氧化聚合相结合的方法制备了聚苯胺/纳米二氧化钛(PANI/TiO2)复合薄膜和聚苯胺(PANI)薄膜, 并通过XPS和SEM对薄膜进行了分析表征. 采用平面叉指电极式器件制备了PANI/TiO2复合薄膜和PANI薄膜气体传感器, 研究了其在常温下对有毒气体NH3和CO 的敏感性能. 结果表明, PANI/TiO2复合薄膜较PANI薄膜具有更优的灵敏度和响应恢复特性.     

Syntheses of mixed ligands complexes of Ru(II) with 4,4′-dicarboxy-2,2′-bipyridine and substituted pteridinedione and the use of these complexes in electrochemical photovoltaic cells

The synthesis, spectral and photoelectrochemical studies of mixed ligand complexes of [Ru(dcbpy)₂(LL)]Cl₂, where LL=2,4-(1,3-N,N′-dimethyl)pteridinedione (DMP), 6,7-dimethyl-2,4-(1,3-N,N′-dimethyl)pteridinedione (MDMP), 6,7-diphenyl-2,4-(1,3-N,N′-dimethyl)pteridinedione (PhDMP), dibenzo[h,j]-(1,3-N,N′-dimethyl)isoalloxazine (BIAlo), 6,7-bis(pyrid-2-yl)-2,4-(1,3-N,N′-dimethyl) pteridinedione (PyDMP) were carried out. These complexes were attached to sol–gel processed TiO₂ electrodes and the photocells fabricated were illuminated with polychromatic radiation in the presence of I₂/I₃⁻ as redox electrolyte. The incident photon to current conversion efficiency determined was found to be 20–48%.