高压下锐钛矿TiO2的电阻率及能带结构的研究

应用在位电阻率测量方法研究高压下锐钛矿TiO2的电学性质. 通过研究电阻率随压力变化的异常变化点, 观察到了TiO2从锐钛矿-柯铁矿-斜锆石的相变. 卸压后,电阻率和初始值相差2个数量级, 说明该相变为不可逆相变. 结合第一性原理计算结果表明, 柯铁矿结构更小的带隙是导致TiO2电阻率减小的根本原因.     

N,Fe, La三掺杂锐钛矿型TiO2能带调节的理论与实验研究

采用基于密度泛函理论(DFT)的平面波超软赝势方法(PWPP), 利用Material studio 计算N, Fe, La三种元素掺杂引起的锐钛矿TiO₂晶体结构、能带结构和态密度变化. 并通过溶胶-凝胶法制得锐钛矿型本征TiO₂, N, Fe共掺杂TiO₂和N, Fe, La共掺杂TiO₂; 用X射线衍射和扫描电镜表征结构; 紫外-可见分光光度计检测TiO₂对甲基橙的降解效率变化. 计算结果表明, 由于N, Fe, La三掺杂TiO₂的晶格体积、键长等发生变化, 导致晶体对称性下降, 光生电子-空穴对有效分离, 同时在导带底和价带顶形成杂质能级, TiO₂禁带宽度由1.78 eV变为1.35 eV, 减小25%, 光吸收带边红移, 态密度数增加, 电子跃迁概率提升, 光催化能力增加. 实验结果表明: 离子掺杂使颗粒变小, 粒径大小: 本征TiO₂>N/Fe_TiO₂>N/Fe/La_TiO₂, 并测得N/Fe/La_TiO₂发光峰425 nm, 能隙减小, 光催化能力比N/Fe_TiO₂强, 增强原因是杂质能级和电子态数量增加引起.     

Magnetic Titanium Dioxide Nanocomposites for Surface‐Enhanced Resonance Raman Spectroscopic Determination and Degradation of Toxic Anilines and Phenols

Mesoporous M‐TiO₂ NCs, functionalized by PATP, can capture toxic anilines and phenols by azo coupling. Loading these nanodevices with Ag NPs offers the possibility for a sensitive quantitative determination of target compounds by SERRS spectroscopy, which allows multiplex detection because of the specific vibrational fingerprints. Sensitivity and selectivity can be further enhanced by concentrating the hybrid particles by an external magnet and compound‐specific binding (anilines versus phenols). The bound toxic compounds can be degraded by TiO₂‐assisted photocatalysis after removal of the loaded hybrid particles from the sample solution with an external magnet. The degradation process can be enhanced in the presence of plasmonic Ag nanostructures.     

An Unexpected Fluctuating Reactivity for Odd and Even Carbon Numbers in the TiO2‐Based Photocatalytic Decarboxylation of C2‐C6 Dicarboxylic Acids

The degradation behaviours of five straight‐chain dicarboxylic acids (from ethanedioic acid to hexanedioic acid) were compared in aqueous TiO₂‐based photocatalysis. When all other conditions were identical, the degradation rates were found to fluctuate regularly with the parity of the number of carbon atoms. Dicarboxylic acids with an even number of carbon atoms (e‐DAs) always degraded more slowly than those acids with an odd number of carbon atoms (o‐DAs). This unusual fluctuation in the reactivity for the degradation of dicarboxylic acids by TiO₂‐based photocatalysis is very closely related to the different pre‐coordination modes of the acids with the photocatalyst. Attenuated total reflection FTIR (ATR‐FTIR) of e‐DAs labelled with ¹³C showed that both carboxyl groups of the acid coordinate to TiO₂ through bidentate chelating forms. In contrast, only one carboxyl group of the o‐DAs coordinated to TiO₂ in a bidentate chelating manner, whereas the other formed a monodentate binding linkage. The bidentate chelating form with bilateral symmetric coordination did not favour degradation. Isotope‐labelling experiments were performed with ¹⁸O₂ to observe the different ways in which incorporated oxygen entered the initial decarboxylated products of e‐ and o‐DAs. For the degradation of butanedioic acid, (45.9±0.5) % of the oxygen in the formed propanedioic acid came from H₂O, whereas for pentanedioic acid, (97.4±0.2) % of the oxygen in the formed butanedioic acid came from H₂O. Our results demonstrate that in TiO₂‐based photocatalysis, the reactivity of active species, such as ^. OH/h_vb⁺, is far from non‐selective and that the attacks of these active species on organic substrates are significantly affected by the coordination patterns of the substrates on the TiO₂ surface.     

β-PbO2/TiO2纳米管电极的制备及其电催化降解苯酚

采用阳极氧化法和脉冲电沉积制备出β-PbO2改性TiO2纳米管(β-PbO2/TiO2-NTs)电极,通过扫描电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等技术手段对制备的β-PbO2/TiO2-NTs电极的表面形貌和结构进行了表征。结果表明,该方法成功地将β-PbO2纳米颗粒分散在TiO2纳米管中,通过电催化降解苯酚评价了β-PbO2/TiO2-NTs电极的电催化活性,实验结果表明,在TiO2-NTs中电沉积β-PbO2提高了电极的电催化活性,对苯酚的降解达到83%。     

金红石相TiO_2纳米棒的氢化处理及其光催化活性

以钛酸四丁酯为钛源,通过盐酸调制的水热法制备出了具有棒状结构的金红石相纳米TiO2,并进一步进行高温氢化处理.采用X射线衍射(XRD),透射电镜(TEM),紫外-可见-近红外漫反射(UV-Vis-NIR DRS),电子顺磁共振(EPR)和表面光伏(SPS)等测试手段对样品进行表征,以气相乙醛和液相苯酚为目标污染物考察催化剂的光催化活性.结果表明:随着高温氢化处理时间的延长,TiO2样品的可见光吸收逐渐增强,其颜色逐渐由白色转变成灰色,这主要与引入的Ti3+/氧空位缺陷有关.表面光电压谱和羟基自由基测试表明,适当时间的氢化处理有利于光生电荷的分离.在光催化氧化降解气相乙醛和液相苯酚过程中,经适当时间氢化处理的样品表现出高的可见光催化活性.并且可见光催化活性的规律与紫外光下的是一致的.这是因为氢化处理后在导带底下方引入了缺陷能级,拓展了可见光响应.过度的氢化处理会在TiO2导带下方引入较低的缺陷能级,使光生电荷的复合加剧,导致光催化活性降低.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

Bi_(0.5)Na_(0.5)TiO_3的制备及光催化性能研究

以Bi(NO3)3·5H2O、Na OH、Ti(OC4H9)4为原料,采用水热法制备Bi0.5Na0.5Ti O3纳米光催化剂。用XRD、TEM表征了Bi0.5Na0.5Ti O3光催化剂的结构和形貌。以亚甲基蓝为模型污染物,考察了不同浓度的Na OH对Bi0.5Na0.5Ti O3晶体在紫外光和可见光照射下光催化活性的影响。通过荧光技术研究了Bi0.5Na0.5Ti O3光催化剂表面羟基自由基的生成,探究了清除剂对光催化降解污染物活性的影响。结果表明:Na OH的浓度对Bi0.5Na0.5Ti O3光催化剂的紫外光和可见光活性有很大的影响,当Na OH浓度为8mol·L-1时制备的Bi0.5Na0.5Ti O3晶体光催化活性最高,光照1h,亚甲基蓝的紫外及可见光催化降解率分别达到69.8%、53.4%,在光催化降解过程中·O2ˉ和·OH起主要作用,尤其是·O2-起了重要作用。