Sensitive Determination of Felodipine in Human and Dog Plasma by Use of Liquid–Liquid Extraction and LC–ESI–MS–MS

Summary A sensitive and selective liquid chromatographic method coupled with electrospray ionization tandem mass spectrometry (LC–ESI–MS–MS) has been developed for quantification of felodipine in human and dog plasma. Compounds were separated on a 2.0 mm × 150 mm, 5.0 m particle, C₈ column with 1 m m ammonium acetate–acetonitrile, 20:80, pH 6.0, as mobile phase at a flow rate of 200 L min^–1. Nifedipine was used as internal standard. Plasma samples were extracted with diethyl ether, the centrifuged upper layer was evaporated, the residue was reconstituted with mobile phase, and the reconstituted samples were injected. The analytical column lasted for at least 1000 injections. By use of multiple reaction monitoring (MRM) mode in MS–MS felodipine and nifedipine were detected without severe interference from the human or dog plasma matrix. Felodipine produced a protonated precursor ion ([M + H]⁺) at m/z 384 and a corresponding product ion at m/z 338. And internal standard (nifedipine) produced a protonated precursor ion ([M + H]⁺) at m/z 347 and a corresponding product ion at m/z 315. Detection of felodipine in human and dog plasma was accurate and precise, with a limit of quantification of 0.05 ng mL^–1. The method has been successfully applied to preliminary pharmacokinetic study of felodipine in human and dog plasma.     

Synthese und Molekülstrukturen von N‐substituierten Diethylgallium‐2‐pyridylmethylamiden

Synthesis and Molekular Structures of N‐substituted Diethylgallium‐2‐pyridylmethylamides (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amine ( 1a ) and (2‐pyridylmethyl)‐di(tert‐butyl)silylamine ( 1b ) form with triethylgallane the corresponding red adducts 2a and 2b via an additional nitrogen‐gallium bond. These oily compounds decompose during distillation. Heating under reflux in toluene leads to the elimination of ethane and the formation of the red oils of [(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido]diethylgallane ( 3a ) and [(2‐pyridylmethyl)‐di(tert‐butyl)silylamido]diethylgallane ( 3b ). In order to investigate the thermal stability solvent‐free 3a is heated up to 400 °C. The elimination of ethane is observed again and the C‐C coupling product N, N′‐Bis(diethylgallyl)‐1, 2‐dipyridyl‐1, 2‐bis(tert‐butyldimethylsilyl)amido]ethan ( 4 ) is found in the residue. Substitution of the silyl substituents by another 2‐pyridylmethyl group and the reaction of this bis(2‐pyridylmethyl)amine with GaEt₃ yield triethylgallane‐diethylgallium‐bis(2‐pyridylmethyl)amide ( 5 ). The metalation product adds immediately another equivalent of triethylgallane regardless of the stoichiometry. The reaction of GaEt₃ with 2‐pyridylmethanol gives quantitatively colorless 2‐pyridylmethanolato diethylgallane ( 6 ).     

Palladium‐Catalyzed 2‐Phenylethenylation of Codeine: 8‐[(1E)‐2‐Phenylethenyl]codeinone Dimethyl Ketal as the Unexpected ‘Masked’ Diene for the Preparation of 19‐Substituted Diels–Alder Adducts of Thebaine

In a search for starting materials for the preparation of 7,8‐fused morphine alkaloid derivatives, 8‐[(1E‐2‐phenylethenyl]codeinone dimethyl ketal ( 4 ) and 8‐[(1E‐2‐phenylethenyl]codeine ( 5 ) were prepared. These dienes were used as substrates in the Diels–Alder reactions. Compound 5 formed the ‘normal’ adduct 12 with N‐phenylmaleimide, while compound 4 behaved in reactions with dienophiles as the ‘masked’ diene 11 , a 8‐[(1E)‐2‐phenylethenyl]‐substituted thebaine, yielding the corresponding 19‐substituted 6,14‐endo‐etheno‐6,7,8,14‐tetrahydrothebaines. Specifically, reaction of 4 with methyl vinyl ketone gave rise to 19‐[(1E)‐phenylethenyl]thevinone ( 14 ) whose structure was elucidated by an X‐ray diffraction analysis. The thebaine derivative 11 was also prepared from 4 .     

Condensation of 4-aryl-4-oxobutanoic acids with benzylamines: Synthetic and structural studies on 1-arylmethyl-3-[(<Emphasis Type="Italic">E</Emphasis>)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-2-pyrrolones

The microwave-mediated reaction of 4-aryl-4-oxobutanoic acids with benzylamines furnished 1-arylmethyl-3-[(E)-1-arylmethylidene]-5-phenyl-2,3-dihydro-1H-pyrrolones. This result is in contract to the earlier report on this reaction conducted under neat conditions. Structures for the products were assigned on the basis of spectral data and confirmed by independent synthesis. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 368–373, March, 2007.     

Understanding the catalytic role of flexible chiral δ-amino alcohols: the 1-(2-aminoethyl)norbornan-2-ol model

An empiric first approach to the knowledge about the structural factors influencing the catalytic behavior of conformationally flexible δ-amino-alcohol-based ligands, for the enantioselective addition of dialkylzincs to prochiral carbonyl groups, has been applied using the 1-(2-aminoethyl)norbornan-2-ol moiety as the model chiral system, and the asymmetrically catalyzed addition of diethylzinc to benzaldehyde as the test reaction. For this purpose, a selected small library of seven norbornane-based chiral ligands, bearing well-defined structural variations to allow a comparative study, that is, variation of the relative configuration and steric hindrance at the C(2), C(3) and/or C(7) norbornane positions, has been synthesized and probed in the mentioned test reaction. The experimental results obtained have been rationalized empirically using diastereomeric Noyori-like transition states, demonstrating that the conformational flexibility of the δ-amino-alcohol ligands, contrary to the more studied and rigid β-amino-alcohols, plays a crucial role on the catalytic behavior of such ligands (stereochemical sense and degree of the stereodifferentiation in the asymmetric process), which makes such structural factors, important for the improved design of new related chiral catalysts. In this sense, a robust crude empirical model for the prediction of the catalytic behavior of such δ-amino-alcohol-based ligands is proposed.     

Hydraulic activity of C4A3Cr in presence of C4A3S

This paper deals with synthesis and assessment of the hydraulicity of C₄A₃Cr, analog phase C₄A₃S to , relevant to the phase chemistry and properties of sulfoaluminate cements. C₄A₃Cr, synthesized at 1250 °C is well crystallized phase, latently hydraulic, with hydration accelerated in the presence of C₄A₃S, or CS. Calorimetric curves show reciprocal influence of sulfate and chromate phase in hydration of C₄A₃S-C₄A₃Cr system. The total heat expressed at hydration is nearly the same for all specimens, but the rate of heat evolution depends on the ratio of C₄A₃S/C₄A₃Cr phases. X-ray diffraction pattern and DTA curves showed that, increasing content of C₄A₃Cr in hydrating mixture results in a coexistence of two types of ettringite (chromate and sulfate ettringite) hydrogarnet, gibbsite and monosulfate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Computation of cross sections for the F+H2(v=0,j=0) → FH(v′j)+H reaction by the hyperspherical method

Summary A quantum mechanical calculation of cross sections for the reaction F+H₂(v=0,j=0) FH(vj)+H has been performed on the T5A semiempirical potential surface using hyperspherical coordinates. State-to-state integral and differential cross sections converge rapidly with the number of components of the total angular momentum projection onto the axis of least inertia. Thev=3 differential cross section has a forward peak whose magnitude increases with energy whereas thev=2 differential cross section has a backward maximum, in qualitative agreement with cross-beam experiments. Thev=2 andv=3 rotational distributions are in rather good agreement with experiment, but not the vibrational branching ratios.     

Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

Reactive E=C(p‐p)π‐Systems. 56 [1] Attempted Preparation of PhE=C(CF3)2 by Reactions of Hexafluoroacetone with PhE(SiMe3)2 (E = As,P)

The chance to prepare sterically and inductively stabilized arsa‐ and phosphaalkenes of the type PhE=C(CF₃)₂ (E = As, P) by reacting phenyl‐bis(trimethylsilyl)‐arsane ( 1 ) and ‐phosphane ( 5 ), respectively, with hexafluoroacetone (HFA) was investigated. The insertion of the carbonyl function in one of the Si–E bonds was found to occur at temperatures between ?78 and 20 °C. The elimination of hexamethyldisiloxane, which in case of acylamides and ketones spontaneously follows the insertion and in case of RE(SiMe₃)–CR′₂(OSiMe₃) at least can be initiated by solid sodium hydroxide as catalyst, turned out to be impossible for the primary products PhE(SiMe₃)–C(CF₃)₂‐OSiMe₃ [E = As ( 2 ), P ( 6 )]. 2 and 6 were characterized by analytical (C, H) and spectroscopic methods (IR, NMR, MS).