Dithiolene transfer from nickel to a dimolybdenum centre: the first dithiolene alkyne complex

Transfer of dithiolene ligands from [Ni(S₂C₂Ph₂)₂] to the dimolybdenum complex [Mo₂(μ-C₂R₂)(CO)₄Cp₂] (R=CO₂Me, Cp=η-C₅H₅) affords the first example of a dithiolene alkyne complex, [Mo₂(μ-C₂R₂)(μ-S₂C₂Ph₂)₂Cp₂], together with [Mo₂(μ-SCRCR)(μ-SCPhCPh)Cp₂] in which sulfur transfer from dithiolene to alkyne has occurred.     

Detector comparison for sulfur and chlorine detection with laser induced breakdown spectroscopy in the near-infrared-region

Laser-induced breakdown spectroscopy has been employed for the investigation of the sulfur and chlorine content of building materials. Both, chloride and sulfate ions are major damaging species affecting the stability and lifetime of a structure. Chlorine and sulfur are mostly detected in the VUV and the NIR. In case of building materials the main elements like calcium or iron have many strong spectral lines over the whole spectral range, so that trace elements can only be detected in spectral windows unaffected from these lines. With regard to a preferably simply, robust against dust and vibrations and portable setup only the NIR spectral features are used for civil engineering applications.

Most detectors, mainly CCD cameras have rapidly decreasing quantum efficiency in the NIR. Also the quantum efficiency of the photocathode of CCD-Detectors with image intensifier is decreasing in the NIR. Different CCD-detectors were tested with respect to high quantum efficiency and high dynamic range, which is necessary for simultaneous detection of weak spectral lines from trace elements and intense spectral lines from main elements.

The measurements are made on reference samples consisting of cement, hydrated cement, cement mortar and concrete with well-defined amounts of the trace elements. Experimental conditions are chosen for an optimum intensity of the trace element spectral lines. The detector systems are compared by limit of detections and the signal to noise ratio.     

高选择性透过二氧化硫气体分离膜的研究 （Ⅳ）不同烃基乙烯基亚砜接枝聚乙烯醇膜的透过性能

研究了不同烃基乙烯基亚砜接枝聚乙烯醇（ＰＶＡ－ＲＶＳＯ，Ｒ＝Ｍｅ，Ｅｔ，ｔ－Ｂｕ，Ｐｈ）膜对纯ＳＯ２、Ｎ２的透过性能以及ＳＯ２／Ｎ２混合气体的分离性能．结果表明上述膜对ＳＯ２具有高的选择性．对不同烃基乙烯基亚砜接枝膜进行了比较．     

A practical access to novel 2-amino-5-arylidene-1,3-thiazol-4(5H)-ones via sulfur/nitrogen displacement under solvent-free microwave irradiation

A new effective approach to the synthesis of a small library of 2-amino-5-arylidene-1,3-thiazol-4(5H)-ones was reported using solvent-free reaction conditions under microwave irradiation. In the first step, rhodanines were subjected to Knoevenagel condensation with aryl aldimines according to a facile one-pot protocol. Then the (5Z)-5-arylidene rhodanine derivatives were transformed directly into the corresponding 2-amino-1,3-thiazol-4(5H)-ones by sulfur/nitrogen displacement reaction under microwaves with retention of configuration and good overall yields.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 2: Effect of sulfur vulcanization on mass changes and thickness distribution of oxidation products during thermal oxidation

Thermal oxidation of sulfur vulcanized polyisoprene samples was studied by gravimetry and IR mapping of carbonyl groups (to determine the oxidized layer thickness (TOL)) at temperatures ranging from 60 to 150 °C in air. Oxidation appears noticeably lower than that for the starting non-vulcanized polyisoprene, revealing a stabilizing effect of sulfur-containing species. After a short period where mass loss presumably due to water evaporation predominates, the sample mass increases until a plateau corresponding to 6.3% (at 60 °C) to 0.5% (at 140 °C) mass gain. Practically no weight gain (∼0.1%) was observed at 150 °C. The mass uptake is due to oxygen grafting to the chains. TOL varies from about 4.6 mm (70 °C) to about 1 mm (150 °C).A kinetic model, derived from a mechanistic scheme of radical chain oxidation including stabilizing events due to hydroperoxide reduction by sulfur-containing groups and taking into account the diffusion-reaction coupling, was established and numerically resolved. The model predictions for mass changes and TOL values are in good agreement with experimental data.     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

Group 6-group 10 heterobimetallic complexes with sulfur ligands

Complexes that contain both a group 6 group 10 metal combination and a sulfur bound ligand form a growing set of species. Their chemistry is discussed and reviewed. Ligands that bind to such heterobimetallic molecules most commonly are S^2– and SR^– species. Metal-metal bonded complexes, and compounds where metal-metal interactions are minimal are both discussed. The structural parameters for many of the crystallographically characterized complexes are tabulated.     

新型二氧化硫被动采样器的研制

研究了一种新型二氧化硫被动采样器。考察了无纺布、定性滤纸和定量滤纸等吸收剂的载体在相同情况下对二氧化硫和二氧化氮的吸收效果 ,对吸收载体进行了优选。并针对低温地区和高温高湿的气候条件 ,确立了以三乙醇胺(TEA)为吸收主体 ,分别以乙二醇、丙三醇为添加剂的吸收体系。     

Rh(II)-catalyzed formation and rearrangement of trifluoroacetyl-containing sulfur ylides

A facile, convenient, efficient, and high yielding Rh(II)-catalyzed formation and rearrangement of trifluoroacetyl-containing sulfur ylides are reported. It is a Rh₂(OAc)₄-catalyzed [2,3]-sigmatropic rearrangement of sulfur ylide intermediates generated from α-diazo compounds.     

Determination of the sulfur components of gasoline streams by capillary column gas chromatography with sulfur chemiluminescence detection

A method using a sulfur chemiluminescence detector (SCD) has been developed for the qualitative and quantitative determination of sulfur components in stabilized gasoline-range process streams, including blended gasolines containing between 1 and > 4000 ppm total sulfur. The detection limit per sulfur component was approximately 50 ppb. On-column injection was employed for optimum precision and accuracy. A new probe material was found which did not soften under FID operating conditions. A new method, using a hydrogen sulfide permeation tube, was developed for rapid alignment of the probe in the FID.