Green Biginelli‐type Reaction: Solvent‐free Synthesis of 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones

The Biginelli‐type compounds, 5‐unsubstituted 3,4‐dihydropyrimdin‐2(1H)‐ones were synthesized by a one‐pot three‐component condensation of aromatic aldehydes, aromatic ketones and urea in the presence of SnCl₄ · 5H₂O under solvent‐free conditions. The advantages of this method are short reaction time (4–10 min), excellent yields (74–97%), inexpensive catalyst and solvent‐free conditions. A plausible mechanism was proposed.     

To gel or not to gel: A prior prediction of gelation in solvent mixtures

The gelation behaviours of low molecular weight gelators 1,3:2,5:4,6-tris(3,4-dichlorobenzylidene)-D-mannitol(G1)and 2,4-(3,4-dichlorobenzylidene)-N-(3-aminopropyl)-D-gluconamide(G2)in 34 solvents have been studied.We found that sample dissolved at low concentrations may become a gel or precipitate at higher concentrations.The Hansen solubility parameters(HSPs)and a Teas plot were employed to correlate the gelation behaviours with solvent properties,but with no success if the concentration of the tests was not maintained constant.Instead,on the basis of the gelation results obtained for the G1 and G2 in single solvents,we studied the gelation behaviours of G1 and G2 in 23 solvent mixtures and found that the tendency of a gelator to form a gel in mixed solvents is strongly correlated with its gelation behaviours in good solvents.If the gelation occurs in a good solvent at higher concentrations,it will take place as well in a mixed solvent(the good solvent plus a poor solvent)at a certain volume ratio.In contrast,if the gelator forms a precipitate in a good solvent at higher concentrations,no gelation is to be observed in the mixed solvents.A gelation rule for mixed solvents is thus proposed,which may facilitate decision making with regard to solvent selection for gel formation in the solvent mixtures in practical applications.     

Al(H2O)63+水交换反应溶剂效应的量子化学团簇模型-密度泛函理论方法研究

在气相模型、极化连续模型、超分子模型和超分子-极化连续模型的基础上,采用量子化学团簇模型密度泛函理论方法,在B3LYP/6-311+G(d,p)基组水平下系统地开展了以下研究:优化得到Al(H2O)63+水交换反应的反应物、过渡态和产物构型,采用MP2方法在相同基组水平下计算得到相应的单点能,考虑零点振动能、热力学校正项和熵等参数的影响,计算得到Al(H2O)63+水交换反应的Gibbs自由能变和反应速率常数kex.计算结果表明:GP-SM//MP2-PCM和GP-SM-PCM//MP2-PCM模型得到的kex相近,并且与文献值相符,说明GP-SM//MP2-PCM模型可以充分考虑真实溶剂效应和主体溶剂效应,适用于Al(H3O)63+体系水交换反应的模拟.     

Solvent- and temperature-controlled inversion of π-facial selectivity in the 1,2-cycloaddition of singlet oxygen to hydroxyphenyl-substituted cyclohexadihydrofurans

Singlet-oxygenation of 3-hydroxyphenyl-substituted dihydrofurans fused with a cyclohexane 1a?c exclusively gave the corresponding syn/anti-stereoisomeric mixtures of dioxetanes 2a?c. The syn/anti-π-facial selectivity in the 1,2-cycloaddition of singlet oxygen (¹O₂) was found to be remarkably sensitive to the solvent as well as the reaction temperature. In fact, the solvent effect was so conspicuous that inversion of the syn/anti-π-facial selectivity was observed in different solvents, such as chloroform and toluene. An LSER (linear solvation energy relationships) analysis suggested that the Lewis-acidity/basicity and HBD (hydrogen-bond donor)/HBA (hydrogen-bond acceptor) ability as well as dipolarity/polarizability of the solvent played an important role in this change in syn/anti-π-facial selectivity. An investigation of the temperature-dependency of the singlet-oxygenation suggested that the syn/anti-π-facial-selective 1,2-cycloaddition of ¹O₂ to 1 was a conformationally-(entropy-) controlled process.     

Solvent‐free Synthesis,Characterization and Solvent‐Vapor Interaction of Zinc(II) and Copper(II) Coordination Polymers containing Nitrogen‐donor Ligands

Coordination polymers of [Zn(INA)₂] ( 1 ) (INA = isonicotinate), [Cu₂(mal)₂(H₂O)₂(bipy)] ( 2 ) (mal = malonate, bipy = 4,4‐bipyridine), and [Zn₂(OAC)₄(bipy)₂] ( 3 ) (OAC = acetate) were prepared using mechanochemical grinding and heating methods. The materials were characterized with elemental analysis, FT‐IR spectroscopy, TGA, SEM, EI‐MS, BET, and PXRD. Comparison of PXRD patterns of the materials with patterns simulated from single‐crystal X‐ray diffraction data allowed identification of the products. Compared to conventional synthetic techniques such as solvothermal/hydrothermal solvent‐based methods, solvent‐free method was found to be simple, highly efficient, and environmentally friendly especially for the preparation of these coordination polymers on a large scale. Solvent‐vapor interaction properties of 1 , 2 , and 3 were investigated by exposure of the compounds to water and methanol at room temperature.     

Microwave‐assisted Domino Cyclization for the Synthesis of Novel Spiro‐benzo[a]phenazine Annulated Heterocycles Catalyzed by a Basic Ionic Liquid

An efficient and green strategy for the improved synthesis of a biologically and pharmaceutically interesting multi‐functionalized diverse novel spiro‐benzo[a ]phenazine annulated heterocycles was developed with the assistance of microwave irradiation. A sequential one‐pot, two‐step domino reaction starting from 2‐hydroxynaphthalene‐1,4‐dione, benzene‐1,2‐diamines, a cyclic carbonyl compound, and 1,3‐indandione in the presence of a basic ionic liquid (1‐butyl‐3‐methylimidazolium hydroxide) as an expedient, ecofriendly and reusable catalyst afforded the corresponding novel spiro[benzo[a ]indeno[2′,1′:5,6]pyrano[2,3‐c ]phenazine] derivatives with high yield under solvent‐free conditions. This domino Knoevenagel–Michael annulation reaction provided five new bonds (two C–C, two CN, and one C–O) and two new rings through multiple operations in a single flask.     

Evaluation of plutonium(IV) extraction rate between nitric acid and tri‐n‐butylphosphate solution using a glass chip microchannel

Extraction of Pu(IV) with tri‐n‐butylphosphate is performed using a glass chip microchannel to evaluate the extraction rate. Two‐phase flow forms in the microchannel by introducing a solution of Pu(IV) and tri‐n‐butylphosphate with flow rates above 5 μL/min. The Pu(IV) extraction reaction proceeds at the interface between the two phases. To evaluate the extraction rate, the contact time between the two phases is varied from 0.48 to 4.8 s by changing the confluent length of the microchannel and the flow rate. The Pu concentration of each phase collected from the microchannel is measured with an alpha liquid scintillation counter, and the contact time dependence of Pu(IV) extraction is obtained. An extraction model based on diffusion in the microchannel and the reaction at the interface is proposed and applied to determine the extraction rate. The extraction process is assumed to follow pseudo‐first‐order kinetics, and the extraction rate constant of Pu(IV) is determined to be 1.5 × 10^?2 cm/s. The investigation demonstrates that a microfluidic device can be a new tool to determine Pu(IV) extraction rates.     

Critical role of a pre‐purge setup in the thermal desorption analysis of volatile organic compounds by gas chromatography with mass spectrometry

In general, volatile organic compounds in ambient air are quantified by following a well‐defined standard calibration procedure using a gas‐/liquid‐phase standard. If the liquid standard is analyzed by a thermal desorption, the solvent effect is unavoidable through the alteration of breakthrough properties or retention times. To learn more about the variables of the thermal desorption‐based analysis, the effect of pre‐purge conditions was evaluated for 18 volatile organic compounds with different types of sorbent tube materials by fixing standard volume (1 μL) and flow rate (100 mL/min). The gas phase calibration was also carried out as reference for the non‐solvent effect. A single tube filled with Tenax TA exhibited the least solvent effect with the short pre‐purge (1 min), while being subject to the breakthrough at or above 10 min pre‐purge. For a three‐bed sorbent tube with Carboxen 1000, at least 10 min of pre‐purge was needed for the compounds with a retention time close to methanol (e.g., propanal). Another three‐bed tube with Carbopack X reduced the solvent effect efficiently for a short pre‐purge (2 min) without the breakthrough. As such, the solvent effect can be adjusted by the proper control of the sorbent tube application.     

Picomolar Detection of Melamine Using Molecularly Imprinted Polymer‐Based Electrochemical Sensors Prepared by UV‐Graft Photopolymerization

Molecularly imprinted polymer (MIP) films of melamine were prepared by photopolymerization of vinylic monomers on diazonium‐modified gold electrodes. The gold‐grafted MIPs are specific and selective for melamine in either organic or aqueous media. The interferent molecules cyromazine and cyanuric acid were not recognized by the MIPs. The limit of detection was as low as 1.75×10^?12 mol L^?1 at S/N=3. Efficiency of melamine rebinding is related to the solubility parameter of the organic solvent or pH and ionic strength of the aqueous medium. It is concluded that diazonium salts permit to design robust electrochemical MIP sensors.     

Spectrophotometric determination of ascorbic acid by the modified CUPRAC method with extractive separation of flavonoids-La(III) complexes

The proposed method for ascorbic acid: AA (Vitamin C) determination is based on the oxidation of AA to dehydroascorbic acid with the CUPRAC reagent of total antioxidant capacity assay, i.e., Cu(II)-neocuproine (Nc), in ammonium acetate-containing medium at pH 7, where the absorbance of the formed bis(Nc)-copper(I) chelate is measured at 450 nm. The flavonoids (essentially flavones and flavonols) normally interfering with the CUPRAC procedure were separated with preliminary extraction as their La(III) chelates into ethylacetate (EtAc). The Cu(I)-Nc chelate responsible for color development was formed immediately with AA oxidation. Beer's law was obeyed between 8.0 × 10⁻⁶ and 8.0 × 10⁻⁵ M concentration range, with the equation of the linear calibration curve: A_450 nm = 1.60 × 10⁴C (mol dm⁻³) − 0.0596. The relative standard deviation (R.S.D.) in the analysis of N = 45 synthetic mixtures containing 1.25 × 10⁻² mM AA with flavonoids was 5.3%. The Cu(II)-Nc reagent is a lower redox-potential and therefore more selective oxidant than the Fe(III)-1,10-phenanthroline reagent conventionally used for the same assay. This feature makes the proposed method superior for real samples such as fruit juices containing weak reductants such as citrate, oxalate and tartarate that may otherwise produce positive errors in the Fe(III)-phen method when equilibrium is achieved. The developed method was applied to some commercial fruit juices and pharmaceutical preparations containing Vitamin C + bioflavonoids. The findings of the developed method for fruit juices and pharmaceuticals were statistically alike with those of HPLC. The proposed spectrophotometric method was practical, low-cost, rapid, and could reliably assay AA in the presence of flavonoids without enzymatic procedures open to interferences by enzyme inhibitors.