YIHn: A New Family of Metal‐rich Hydride Halides

The graphite‐like yttrium hydride halides, YIH_n (0.8 ? n ? 1.0), have been prepared in quantitative yields by heating either YI₃, YH₂ (1:2) or stoichiometric YI₃, YH₂, Y mixtures in sealed Ta ampoules at 900°C. A lower limit of the homogeneity range, n ≈ 2/3, has been determined from dehydrogenation experiments. All YIH_n phases adopt the ZrBr‐type heavy‐atom structure. The hydrogen variation is accompanied by a change in the c lattice constant from 31.162(3) to 31.033(1) Å for n = 0.61(3) to 1.02(3). The YIH_n phases reversibly react with hydrogen at 400‐600°C to form the light green transparent compound YIH₂. However, increasing the reaction temperature above 700°C causes decomposition to an unidentified phase being in equilibrium with YH₂ and YI₃. The arrangement of the heavy atoms in YIH₂ (P m1; a = 3.8579(3) Å, c = 10.997(1) Å) corresponds to a four‐layer I‐Y‐Y‐I slab with the stacking sequence (AbaB) as was found by x‐ray powder diffraction data refinement with the Rietveld method. A miscibility gap exists between YIH and YIH₂. Samples YIH_n (n ? 1.0) show metallic conductivity at room temperature, which changes into semiconducting behavior with decreasing temperature as n approaches its lower value ≈ 2/3.     

Influence of the Coordination of Donor Solvent Molecules to 1,4,7,10-Tetramethyl-1,4,7,10- tetraazacyclododecanenickel(II) and Analogous Nickel(II) Complexes on Their Steric Factors

Coordination equilibrium constants (K _NiS) of some donor solvent molecules to 1,4,7,10-tetramethyl-1,4,7,10-tetraazacyclododecanenickel(II) ([Ni(Me₄[12]aneN₄)]²⁺) were determined in nitrobenzene (a noncoordinating bulk solvent). The first (K _NiS1) and second stepwise coordination equilibrium constants (K _NiS2) for 1,4,7,10-tetraazacyclododecanenickel(II) ([Ni([12]aneN₄)]²⁺), 1,4,8,11-tetraazac yclotetradecane- nickel(II) ([Ni([14] aneN₄)]²⁺), 1,4,8,11-tetrathiacyclotetra-decanenickel(II) ([Ni([14]aneS₄)]²⁺) were also reinvestigated. The K _NiS values for [Ni(Me₄[12]aneN₄)]²⁺ were compared to those of [Ni([12]aneN₄)]²⁺, (1R,4S, 8R,11S)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecanenickel(II) (R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺), R,R,S,S-[Ni(Me₄[14]aneN₄)]²⁺, [Ni([14]aneN₄)]²⁺, and [Ni([14]aneS₄)]²⁺. Coordination of pyridine (Py), N,N,N′,N′-tetramethylurea (TMU), and N,N-dimethylacetamide (DMA) to [Ni(Me₄[12]aneN₄)]²⁺ was observed, although these donor solvent molecules did not coordinate to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺. The K _NiS values for Py, TMU, and DMA are 7.9, 2.8, and 9.0 dm³⋅mol⁻¹, respectively. Some hydrogen-bonding waters were coordinated to R,S,R,S-[Ni(Me₄[14]aneN₄)]²⁺, but such waters did not coordinate to [Ni(Me₄[12] aneN₄)]²⁺. Also, the K _NiS2 values were larger than the corresponding K _NiS1 values for [Ni([14]aneS₄)]²⁺. Furthermore, the K _NiS1 values for [Ni([12]aneN₄)]²⁺ were the largest among these nickel(II) complex cations. The K _NiS, K _NiS1, and K _NiS2 values are discussed in terms of properties of the donor solvents and steric strains of these nickel(II) complex cations.     

Concerning the Reaction of the Betain‐Like Compound O2CC(PPh3)2 with Tungsten‐Carbonyl Derivatives; Preparation and Crystal Structures of [(CO)5W{η1‐O2C2(PPh3)2}] and [(CO)4W{η2‐O2C2(PPh3)2}]

The carbodiphosphorane CO₂ adduct O₂CC(PPh₃)₂ ( 1a ) reacts with [(CO)₅W(THF)] and [(CO)₃W(NCEt)₃] to produce the complexes [(CO)₅W{η¹‐O₂CC(PPh₃)₂}] ( 2 ) and [(CO)₄W{η²‐O₂CC(PPh₃)₂}] ( 3 ), respectively. Whereas in 2 the betain‐like ligand is coordinated at the tungsten atom in a monodentate manner, in 3 it acts as a chelating ligand with formation of a WO₂C four‐membered ring. As a by‐product during the reaction with the acetonitrile adduct also some crystals of the hydrolysis product [HC(PPh₃)₂]₂[W₆O₁₉] · 3C₂H₄Cl₂ (4 · 3C₂H₄Cl₂) were isolated. All compounds could be characterized by X‐ray analyses and the usual spectroscopic methods.     

稀土含硫有机配体配合物的合成与应用研究进展

简要综述了稀土含硫有机配体配合物的常用合成方法, 概述了该类型配合物在橡胶硫化、摩擦学、稀土农用和医药等领域的潜在应用, 并指出了稀土含硫配合物今后的研究重点.     

Direct determination of rare earth impurities in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry

A novel method was developed for the direct determination of trace quantities of rare earth elements (REEs) in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry (ICP-MS) in this work. The mass spectra overlap interferences arose from Er matrix on the neighbouring and monoisotopic analytes of ¹⁶⁵Ho(100) and ¹⁶⁹Tm(100) were eliminated by adjusting instrumental peak resolution value from 0.7 to 0.3 amu. The matrix suppression effect of Er on the ion peak signals of REEs impurities was effectively compensated with spiking In as internal standard element. The limit of quantitation (LOQ) of REEs impurities was from 0.0090 to 0.025 μg g⁻¹, the recoveries of spiked sample for REEs were found to be in the range of 90.3-107% through using the proposed method and relative standard deviation (R.S.D.) varied between 2.5% and 6.7%. The novel methodology had been found to be suitable for the direct determination of trace REEs impurities in 99.999-99.9999% high purity Er₂O₃ and the results obtained from this method keep in good agreement with that acquired from high resolution ICP-MS.     

Mild and Efficient Deprotection of 1,3‐Dithianes with N,N′‐ Diiodo‐N,N′‐1,2‐Ethanediyl‐Bis(p‐Toluenesulphonamide)

Aliphatic and aromatic 1,3‐dithiane are oxidized to the corresponding carbonyl compounds in good yields under mild conditions by N,N′‐diiodo‐N,N′‐1,2‐ethanediyl‐bis(p‐toluenesulphonamide) [NIBTS] and silver nitrate.     

Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde: Calibration of a thermal desorption-gas chromatography-flame ionization detection

The paper presents a new method for the generation of acetaldehyde in the amounts that allow to calibrate the measuring system. The method is based on thermal decomposition of surface compounds at the range 130-190 °C, in which an acetaldehyde as the decomposition product is released. The synthetic pathway leading to the desired surface compounds is described. Investigations demonstrated that the synthesis of the compounds on the surface of the support material (silica gel) was carried out homogeneously. The technique proposed was used for the generation of gaseous standard mixtures containing acetaldehyde for the calibration of a thermal desorber-gas chromatograph-flame ionization detector system.     

Advanced Methodologies for Adsorption/Thermal Desorption with Tenax-TA for the Analysis of Polycyclic Aromatic Hydrocarbons and Sulfur Compounds

We have evaluated an analytical method for the determination of polycyclic aromatic hydrocarbons (PAHs) and sulfur compounds in air by means of adsorption/temperature-programmed thermal desorption (ATPTD) with small bed volume (0.08g) Tenax-TA cartridges, followed by a cryogenic trap in a precolumn with liquid nitrogen as an appropriate concentration method before capillary gas chromatography is described. The enriched components from the adsorption cartridges are transferred to the capillary column with a valveless switching system. Recoveries were determined for the complete ATPTD method. Desorption recoveries near 100% were found for various of polycyclic aromatic hydrocarbons and sulfur compounds. The sulfur compounds known to cause nuisance odors in the atmosphere near sulfur recovery and sewerage treatment works were also determined.     

Determination of the apparent standard potential of the Dy/Dy(Ⅲ) system in the LiCl-KCl eutectic

The apparent standard potential of Dy/Dy(III) system in the LiCl-KCl eutectic has been determined by the logarithmic analysis of the semi-integrals of voltammograms, logarithmic analysis of chronopotentiograms and the open circuit potentiometry. The dysprosium equilibrium potentiab for various concentration of dysprosium chloride in the LiCl-KCl eutectic melt between 400-500℃ were first determined experimentally, and the apparent standard potential of this system and its temperature dependance have been calculated.     

利用微生物直接生产羟基丁酸单体

利用重组大肠杆菌E.coli HB101来进行直接生产羟基丁酸(HB)手性单体,研究了含pUCAB质粒的重组体E.coli HB101在各种条件下生长及积累HB单体的情况,研究了HB单体的积累随pH值变化的规律。结果表明,pH=6.8时,48 h内细菌可生产0.5 g/L以上的HB单体。