锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Cavitands bearing four fluorophores

The synthesis of novel cavitands containing four fluorophores [tert-butoxycarbonyl protected 2,2′-bis(furyl)benzidine (t-BOC FurylBz) or 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (t-BOC PFDA)] and ionophoric functional groups on the upper rim is reported. The cavitands bearing the four fluorophores emit blue light photoluminescence. In particular, the cavitand containing PFDA moieties exhibits a high photoluminescence quantum yield.     

气相色谱法研究配位化合物的热稳定性——ⅩⅢ.普鲁士蓝化合物的热分解及其加氢反应研究

普鲁士蓝化合物的热分解过程,可分为三个阶段:(1)脱水;(2)Fe³⁺还原至Fe²⁺;(3)C≡N^-键的断裂。H₂气中的热分解由于发生了一系列的加氢反应,分解产物及所对应的分解温度都不同于He气中的情况,其产物的种类增加,C≡N^-键的断裂温度降低。普鲁士蓝化合物中,CN^-呈典型的双端基配位,可看作是一种双金属配位的活化模型,与CN^-呈单端基配位的K₃[Fe(CN)₆]相比,C≡N^-键的活化程度增加,不仅断裂温度降低,且能发生更深度的加氢反应。     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

微波合成铝掺杂钻酸锂材料及性能研究

以LiOH·H2O，Al2O3和Co3O4为原料，微波加热合成Li离子电池正极材料LiAlxCo（1-x）O2．通过XRD测试表征了不同Al加入量时合成产物的晶体结构，确定当x≤0．4时，产物为单一相层状结构．计算了不同x时LiAlxCo（1-x）O2的晶胞参数，随着x的增大，a值减小，c值增大．对合成LiAlxCo（1-x）O2样品进行DSC—TGA测试，结果表明，当x不同时，合成样品的热稳定性不同．SEM测试表明，合成晶体粒度较均匀，粒径在5μm左右．电化学测试表明，LiAl0.2Co0.8O2的电化学性能最好，首次循环放电容量为127mAh／g，多次循环容量损失率小于LiCoO2．     

Pr0.6-xNdxSr0.4FeO3-δ电极材料的光谱及性能研究

以柠檬酸-硝酸盐自蔓延燃烧法合成了ABO₃型钙钛矿结构的Pr_0.6-xNd_xSr_0.4FeO_3-δ(x=0.0～0.6)系列稀土复合氧化物粉体。利用傅立叶变换红外光谱(FTIR)和激光共焦拉曼光谱(LRS)对产物的晶体结构进行了表征。分别采用热膨胀仪测定烧结陶瓷体的热膨胀系数(TEC)；TG-DTA记录材料的热稳定性；XRD研究阴极材料与中温电解质Sm_0.2Ce_0.8O_1.9(SDC)及La_0.8Sr_0.2Ga_0.8Mg_0.2O_3-δ(LSGM)的化学相容性；SEM观察阴极/电解质复合材料的断口形貌。结果表明，该系列样品在高、低温热循环过程中化学稳定、晶型稳定；在室温至1 100 ℃范围内的平均热膨胀系数为1.16 × 10^-5 K^-1，与SDC及LSGM的热膨胀系数十分接近。阴极/电解质混合粉体1 200 ℃煅烧10 h，XRD未检测到新物质；SEM显示复合层断面界面清晰，没有相互扩散现象。该体系有望成为以SDC或LSGM为电解质的中温固体氧化物燃料电池合适的阴极材料。     

尖晶石LiMn_2O_4的多元掺杂改性研究

采用高温固相法合成了多元复合掺杂改性的尖晶石型锰酸锆正极材料，用X射 线衍射法对材料进行了表征，表明所得材料均呈现良好的尖晶石的结构，通过充放 电测试，发现其中LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)La_(0.01)O_4和 LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)-Zr_(0.01)O_4的循环性能有了很大程 度的改善，循环50次后仍能保持94%和91%的容量。     

依文思蓝褪色分光光度法测定雷洛昔芬

在pH 1 .4～ 2 .5的NaAc HCl缓冲介质中 ,雷洛昔芬 (raloxifene)与依文思蓝 (evansblue)反应形成离子缔合物 ,使依文思蓝溶液褪色 ,最大褪色波长位于 61 0nm。雷洛昔芬在 0～ 1 .4× 1 0 - 5mol/L的浓度范围内遵守比尔定律 ,表观摩尔吸光系数ε6 1 0 为 1 .76× 1 0 4L·mol- 1 ·cm- 1 。方法具有较高的灵敏度和良好的选择性     

Irreversible and Reversible Deactivation of Bilirubin Oxidase by Urate

Oxygen is electroreduced to water on a carbon cathode coated with wired bilirubin oxidase in a pH 7.4 0.15 M NaCl phosphate buffer solution at 37 °C at much lesser polarization than it is on a pure platinum cathode in 0.5 M H₂SO₄. While the wired bilirubin oxidase cathode operates for over a week in the aerated or oxygenated buffer solution, it is degraded rapidly when in serum. We reported earlier that in the presence of O₂ an intermediate product of the electrooxidation of urate, which is a normal serum component, irreversibly damages the wired bilirubin oxidase and also reported that the electrocatalyst is irreversibly damaged, in the absence of urate, when it is brought, by disconnecting the electrode, to the O₂/H₂O half cell potential at pH 7.4. Here we report that a) dissolved bilirubin oxidase is irreversibly and rapidly damaged by urate in the presence of O₂; and b) that the immobilized wired bilirubin oxidase electrocatalyst is not only irreversibly deactivated by urate in the presence of O₂ in a few hours, but is initially reversibly deactivated, in 1 min or less, by the urate in the presence of O₂.     

Products of Ag+, Cu+ and Cu2+ Ion Implantation in the Surface of Polycrystalline Cadmium Sulfide as Photocatalysts for the Oxidation–Reduction Reaction of Methylene Blue with Formaldehyde

Semiconductor–semiconductor and molecule (molecular ion)–semiconductor products are formed upon the implantation of Ag⁺, Cu⁺, and Cu²⁺ ions in the CdS surface. Possible mechanisms were examined for their photocatalytic action in the reduction of methylene blue.