丙烯环氧化反应中失活钛硅分子筛的无氧脱附研究

采用无氧脱附方法对丙烯环氧化中失活的薄层钛硅分子筛(即Spent EPO-4)和环氧丙烷(PO)与丙二醇单甲醚(MME)浸渍的TS-1催化剂(即PO／TS-1和MME／TS-1)进行了研究，脱附产物由气相色谱定性分析，无氧脱附后的催化剂以丙烯环氧化为探针反应进行再生性能评价，同时在无氧条件下考察了TS-1在300℃时催化裂化PO反应．实验结果表明：PO浸渍TS-1可使其活性明显下降，PO在TS-1上不是简单的弱吸附，存在着化学强吸附和自聚．失活催化剂(Spent EPO-4和PO／TS-1)经无氧脱附后，其催化活性可显著恢复．通过对失活催化剂脱附产物的比较，推测了丙烯环氧化反应过程中钛硅分子筛失活原因．     

钛硅分子筛挤条成型催化剂热稳定性能的研究

采用在空气中程序升温焙烧的方式考察了钛硅分子筛挤条成型催化剂的热稳定性能．对不同温度焙烧得到的样品进行了XRD、IR、UV Raman和SEM表征．结果表明，在高温焙烧时，由于载体结构的改变引起载体与分子筛之问相互作用发生变化，导致成型催化剂中分子筛骨架破坏．随着焙烧温度的提高，IR谱图中960cm^-1处代表钛进入骨架的特征峰的强度迅速减弱，当焙烧温度达到1000℃时，960cm-1处的骨架钛特征峰移至948cm^-1．在紫外拉曼谱图中，骨架位钛物种的特征拉曼谱峰-1125cm^-1谱峰在加入SiO2载体后，高温下峰强度明显降低，这说明载体的加入降低了钛硅分子筛挤条成型催化剂的热稳定性能．     

Reaction of Grignard Reagents with Diethyl Perfluoroacyl (1-Cyanoethyl)phosphonates. Synthesis of Perfluoroalkylated α,β-Unsaturated Nitriles with Predominant Z-Selectivity

ＩｎｔｒｏｄｕｃｔｉｏｎＲｅｃｅｎｔｌｙｍｕｃｈａｔｔｅｎｔｉｏｎｈａｓｂｅｅｎｄｅｖｏｔｅｄｔｏｔｈｅｓｙｎｔｈｅｓｉｓｏｆα ,β ｕｎｓａｔｕｒａｔｅｄｎｉｔｒｉｌｅｓｓｉｎｃｅｔｈｅｙａｒｅｉｍ ｐｏｒｔａｎｔｓｔｒｕｃｔｕｒａｌｆｅａｔｕｒｅｏｆｓｅｖｅｒａｌｎａｔｕｒａｌｌｙｏｃｃｕｒｒｉｎｇｂｉ ｏｌｏｇｉｃａｌｌｙａｃｔｉｖｅｃｏｍｐｏｕｎｄｓ .1,2 Ｔｈｅｉｎｔｒｏｄｕｃｔｉｏｎｏｆｆｌｕｏ ｒｉｎｅｏｒｔｒｉｆｌｕｏｒｏｍｅｔｈｙｌｇｒｏｕｐｉｎｔｏｂｉｏｌｏｇｉｃａｌｌｙａｃｔｉｖ…     

Selective separation of gold from iron ore samples using ion exchange resin

Gold in iron ore samples is separated from iron (major matrix cation), antimony and vanadium using anion exchange resin in (0.2 M) HBr, potassium peroxodisulfate and acetone:water:nitric acid media. The exchangeable anion Cl⁻ of the ion exchanger Dowex 1X 4 is replaced by Br⁻ using (6 M) HBr solution. Certified reference material DGP-M1, spiked ferric magnetic oxide, gold radioactive tracer ¹⁹⁸Au and gold standard solutions are used to study the adsorption efficiency and the yield recovery of tetrabromoaurate AuBr₄⁻ from the resin. Ten eluents have been tried to elute gold from the column, and it has been found that a 10 ml potassium peroxodisulfate and 240 ml acetone:water:nitric acid [125:5:5] solution fulfills the objective. The set up of the separation procedure allows quantitative adsorption of gold by the resin, while the major matrix cation (Fe) and others (Cd, Ag, Cu, V, Sb, Ti) have been passed through the column with the feeding solution (0.2 M) HBr. The resin selectivity coefficient (K) of separating Au from Fe has been found to be K_Fe^Au≈6.4×10¹¹. The eluted Au is treated with K₂S₂O₈ and H₂O₂ for spectrophotometric determination as rhodamine-B complex at 555.6 nm. The linearity, detection limit, precision, and accuracy of the determination method have been found to be up to 2.0 μg g⁻¹, 0.018 μg g⁻¹, 0.009 μg g⁻¹ and 3%, respectively.     

Ag-MoO3催化丙烯直接气相环氧化反应的原位红外研究

制备了对丙烯直接气相环氧化具有较好催化性能的Ag-MoO3催化剂, 采用原位FT-IR技术研究了丙烯、环氧丙烷及丙烯+氧气的混合气在Ag和Ag-MoO3催化剂表面上的吸附及反应行为. 研究表明, 丙烯在Ag和Ag-MoO3催化剂表面上吸附后, 均不发生化学反应, 而环氧丙烷吸附后在较高温度下则发生开环和聚合反应直至产生积炭. 与Ag催化剂相比, 在Ag-MoO3催化剂上, MoO3的加入在降低催化剂活性的同时, 在一定程度上抑制了产物环氧丙烷的开环及深度反应, 使环氧丙烷的选择性提高. 另外, 在较低的反应温度和较短的滞留时间下, 环氧丙烷发生深度反应的程度明显降低.     

Facial selectivity of the (R)-1,3-dimethyl-1-cyclohexyl cation in the gas phase

The model reaction between the (R)-1,3-dimethyl-1-cyclohexyl cation (I) and methanol has been investigated under gas-phase radiolytic conditions (750 Torr; 25-120 degrees C) with the aim of evaluating the intrinsic factors that govern the facial selectivity of biased carbocations. The peculiarity of the experimental approach allows the formation of different CH(3) (18)OH.I ionic adducts. Subsequent conversion of these adducts to give the corresponding E/Z covalent products follows different reaction coordinates, which are characterized by their own activation parameters. On the grounds of density functional theory (DFT) results, several [CH(3)OH.I] structures have been located on the relevant potential-energy surface (PES). The experimental results point to a gas-phase facial selectivity, which is mainly governed by entropic factors that arise as a result of the occurrence of different noncovalent ion-molecule "facial adducts" (FA). The formation of FAs may also play an important role in both the reaction dynamics and the positional selectivity. The present results cannot be interpreted by any of the models based on solution-phase experiments.     

Stereoisomeric flavor compounds,part LVIII: The use of heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)-β-cyclodextrin as a chiral stationary phase in flavor analysis

The characteristics of the new chiral stationary phase heptakis(2,3-di-O-methyl-6-O-tert-butyldimethylsilyl)-β-cyclodextrin are outlined and compared with permethyl- and perethyl-β-cyclodextrins.     

Fourier transform infrared spectroscopy study of the effect of pH on anion and cation adsorption onto poly(acrylo‐amidino diethylenediamine)

The role of hydrogen bonding in the chemistry of transition‐metal complexes remains a topic of intense scientific and technological interest. Poly(acrylo‐amidino diethylenediamine) was synthesized to study the effects of hydrogen bonding on complexes at different pHs. The polymer was synthesized through the coupling of diethylene triamine with polyacrylonitrile fiber in the presence of AlCl₃ · 6H₂O addition. The adsorption capacity of this polymer was 11.4 mequiv/g. The ions used for the adsorption test were CrO, PO, Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺. All experiments were confirmed with Fourier transform infrared. In the study of anion adsorption, at low pHs, only ionic bonds existed, whereas at high pHs, no bonds existed. However, in the middle pH region, both ionic bonds and hydrogen bonds formed between poly(acrylo‐amidino diethylenediamine) and the chromate ion or phosphate ion. When poly(acrylo‐amidino diethylenediamine) and metal ions (Cu²⁺, Ni²⁺, Fe²⁺, and Ag⁺) formed complexes, a hydrogen‐bonding effect was not observed with Fourier transform infrared. The quantity of metal ions adsorbed onto poly(acrylo‐amidino diethylenediamine) followed the order Ag⁺ > Cu²⁺ > Fe²⁺ > Ni²⁺. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2010–2018, 2004     

The Direct Electrochemical Oxidation of Ammonia in Propylene Carbonate: A Generic Approach to Amperometric Gas Sensors

The direct electrochemical oxidation of ammonia in propylene carbonate is reported for the first time. The voltammetric responses at glassy carbon, boron‐doped diamond, edge and basal plane pyrolytic graphite electrodes are explored and compared with the outcome indicating that the optimum electrode substrate for analytical purposes in this solvent is glassy carbon. Proof‐of‐concept is shown for the amperometric detection of ammonia using basal plane pyrolytic graphite electrodes abrasively modified with glassy carbon spheres. Given the significantly lower vapor pressure of propylene carbonate in comparison to water the implications for extending the life‐time of practical sensors are evident. Propylene carbonate shows a wide potential window with glassy carbon electrodes permitting this approach to be used for a potential diversity of gaseous analytes.     

Synthetic Crystalline Calcium Silicate Hydrate (I): Cation Exchange and Caesium Selectivity

Summary.  Solid crystalline calcium silicate hydrate (I) synthesized from equimolar amounts of Ca and Si under hydrothermal conditions at 120°C shows cation exchange properties towards divalent metal cations such as Ni, Cu, Cd, or Hg. It also exhibits caesium selectivity in the presence of Na⁺. The exchange capacity and selectivity of the solid can be increased by 10 and 28%, respectively, upon substitution of 0.01 mol of the Ca²⁺ in its structure by Na⁺. The ability of metal cation uptake by the solid was found to obey the order Ni²⁺ > Hg²⁺ > Cu²⁺ > Cd²⁺. The different affinities of calcium silicate hydrate (I) towards these ions can be used for their separation from solutions and also in nuclear waste treatment. The mechanism of the exchange reaction is discussed. Received June 11, 2001. Accepted September 10, 2001