应用加权列联表分析预测汛期（4─9月）洪涝趋势

本文根据汉寿县１９６０─１９８８年洪涝灾害资料，应用加权列联表分析法，与前期气候因子建立洪涝趋势预测模式。最后对１９８９─１９９０年洪涝试报，取得了满意的效果。     

系统动力学模型结构分析中表函数的改进方法

分析了非线性系统动力学(SD)模型中表函数环节的传统表示方法,指出该方法对于进行SD模型的结构分析所造成的障碍,并提出了用牛顿插值的承袭性算法来改进表函数环节的表示方法的思路.接着分别介绍了用差商和差分牛顿插值法改进表函数的过程.最后,通过一个实例说明了表函数改进的方法,并展示了以此为基础进行结构分析的思路.     

改性壳聚精膜用于醇水混合液分离的研究──Ⅲ．超细粉末填充壳聚精膜

首次制备了用Ｓｉ３Ｎ４，ＳｉＯ２，ＴｉＨ４超细粉末填充的改性壳聚精膜，并将其用于乙醇／水混合液的分离中。实验表明壳聚糖膜经超细粉末填充后强度增大，溶胀度减小。用于乙醇／水混合液渗透蒸发分离时，分离因子和渗透通量都有提高，并在填充量为１６．７％附近出现极大值。随着料液中乙醇含量的增大，渗透通量减小，分离因子增大；随着料液温度的升高渗透通量显著增大，分离因子则稍有下降。并简单讨论了超细粉末在乙醇／水混合液分离中的作用。     

矿渣粉加固粉土的理论分析及路用性能研究

提出了矿渣粉加固粉土的相关理论。将矿渣粉在加固土中的作用归结为火山灰胶凝效应和微集料填充效应,而火山灰胶凝效应又可进一步归结为水化作用、激发作用和离子交换作用;认为微集料填充效应与矿渣粉细度极为相关;用框图归纳了矿渣粉加固土的两种作用效应。进行了矿渣粉、石灰粉加固土无侧限饱水抗压强度、水稳定性、冻稳定性、温度收缩和干燥收缩等路用性能试验,并进行比较。结果表明,矿渣粉加固土所测路用性能指标优于石灰粉加固土。为工程应用提供了试验依据。     

用于同步辐射光源的成像板粉末衍射系统

报道了我们研制的一套成像板粉末衍射装置,对其误差来源进行了详细的分析讨论,并与衍射仪进行了比较.该装置的半径为143.3mm,最大测量角度范围不160°，最大角度(2q )偏差小于0.03°,这些性能指标已被实验所证实,完全可应用于粉末衍射全谱的测量.     

Reference priors for exponential families with simple quadratic variance function

Reference analysis is one of the most successful general methods to derive noninformative prior distributions. In practice, however, reference priors are often difficult to obtain. Recently developed theory for conditionally reducible natural exponential families identifies an attractive reparameterization which allows one, among other things, to construct an enriched conjugate prior. In this paper, under the assumption that the variance function is simple quadratic, the order-invariant group reference prior for the above parameter is found. Furthermore, group reference priors for the mean- and natural parameter of the families are obtained. A brief discussion of the frequentist coverage properties is also presented. The theory is illustrated for the multinomial and negative-multinomial family. Posterior computations are especially straightforward due to the fact that the resulting reference distributions belong to the corresponding enriched conjugate family. A substantive application of the theory relates to the construction of reference priors for the Bayesian analysis of two-way contingency tables with respect to two alternative parameterizations.     

TiO2 粉末催化剂光催化降解室内 空气中有机污染物

本文制备了一系列 TiO2粉末催化剂, 用光催化法降解室内空气中各种微量有机污染物,最终降解率 接近 100%. 考察了晶型对光催化剂性能的影响, 结果表明,锐钛矿型 TiO2 的催化性能最好. 最后,分析了 TiO2 光催化反应机理.     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

沉淀法制备CeO2超微粉末

采用过氧化氢－－氨水沉淀法在较低温度下制备ＣｅＯ２超微粉末。试验表明，溶液起始浓度及焙烧温度以形成粉素晶体粒径有一定影响。焙烧温度在２２０－８５０℃，所得ＣｅＯ２微粉均为立方晶系，透射电测试表明，粒子基本呈球形，晶体平均粒径随焙烧温度升高而增大。控制适当条件，可制得粒径范围在５－１３ｎｍ，比表面积１１１．８ｍ＾２／ｇ的ＣｅＯ２超微粉末。