Electrochemical behaviour of Pt(100), Pt(111) and Pt polycrystalline surfaces in hydrogencarbonate solution

It was demonstrated that adsorbed CO is obtained from the reduction of NaHCO₃ solution when Pt(100), Pt(110), disordered Pt(111) and polycrystalline electrodes are employed. Reduction of CO₂ coming from the dissociation of the hydrogencarbonate anion is proposed as the reaction that produces CO. By using Fourier transform infrared spectroscopy, linear and multi-bonded CO were detected on polycrystalline platinum electrodes. The shape of the band associated with linearly adsorbed CO is monopolar as a consequence of the partial overlapping, at lower wavenumbers, of the absolute bands at both potentials (0.05 and 0.35 V).     

铂单晶电极表面不可逆反应动力学I.Pt(100)单晶电极上甲酸氧化的现场红外反射光谱研究

运用电化学暂态方法和现场时间分辨ＦＴＩＲ反射光谱研究甲酸在Ｐｔ（１００）单晶电极上的解离吸附和氧化过程,深入认识了甲酸解离吸附的反应速率在－０．２５至０．２５Ｖ电位区间呈火山形变化的规律。根据电化学现场时间分辨红外光谱的研究结果,提出在研究反动力学时避免甲酸解离吸附干扰的方法,为进一步研究甲酸在Ｐｔ（１００）电极表面经活性中间体直接氧化至ＣＯ２的反应动力学奠定了基础。     

微波－气相－热压法分解高纯铂的研究

本文研究了微波气相热压法新技术分解高纯铂在密闭的聚四氟乙烯高压罐中，以微波瞬间加热混合酸产生的高压、纯净蒸气分解金属铂，此法避免了酸中杂质的沾污以制备供高纯铂分析的试液，提高了痕量杂质分析的准确度和降低检测限     

脱乙酰壳多糖化学修饰电极测定铂的研究

用脱乙酰壳多糖修饰电极为工作电极，阳极溶出伏安法测定痕量铂。在ｐＨ＝２￣３的ＫＣｌ－ＨＣｌ底液中，－０．３Ｖ富集２ｍｉｎ，静止１５ｓ，以０．２Ｖ／ｓ扫速阳极溶出，峰电位在－０．１６Ｖ（ｖｓ．ＳＣＥ），铂（Ⅳ）离子浓度在０．５￣５．０μｇ／ｍＬ范围内与峰高呈线性关系。富集１０ｍｉｎ后，可检测０．０２５μｇ／ｍＬ铂（Ⅳ）。该法用于贵金属矿样的测定，无需分离，结果满意。用循环伏安法、紫外光谱和拉曼光谱研     

铂（Ⅳ）—钼酸盐—丁基罗丹明B缔合显色反应的研究

本文研究在聚乙烯醇(PVA)存在下,铂与钼酸铵和丁基罗丹明B(BRB)形成离子缔合物,该缔合物的最大吸收位于570nm,摩尔吸光系数ε值为9.26×10~5L·mol~(-1)·cm~(-1),服从比耳定律范围0～3.0μg Pt/25ml,缔合物至少稳定3周。测定铂的条件为C_(HClO_4)=1.4mol/L,C_(MoO_4~(2-)=1.1×10~(-3)mol/L,C_(BRB)=3.8×10~(-5)mol/L,0.08％PVA。考察了40多种共存离子的影响,除形成杂多酸的元素外,大多数不干扰。本法已用于催化剂和某些铂矿中铂的测定,结果较满意。     

Moderating the nucleophilicity of the sulfide ligands in the dinuclear {Pt2S2} metalloligand system using triphenylarsine

Reaction of cis-[PtCl₂(AsPh₃)₂] with excess sodium sulfide in benzene gave the triphenylarsine analogue of the well-known metalloligand [Pt₂(μ-S)₂(PPh₃)₄] as an orange solid.The compound was characterised by detailed mass spectrometry studies, and by conversion to various alkylated and metallated derivatives.The sulfide ligands in [Pt₂(μ-S)₂(AsPh₃)₄] are less basic than the triphenylphosphine analogue, and the complex gives a relatively weak [M+H]⁺ ion in the positive-ion electrospray (ESI) mass spectrum, compared with the phosphine analogue.Methylation of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with MeI gave the species [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ and [Pt₂(μ-SMe)₂(PPh₃)₃I]⁺, indicating a reduced tendency for the sulfide of [Pt₂(μ-S)(μ-SMe)(AsPh₃)₄]⁺ to undergo alkylation.The lability of the arsine ligands is confirmed by the reaction of an equimolar mixture of [Pt₂(μ-S)₂(PPh₃)₄] and [Pt₂(μ-S)₂(AsPh₃)₄] with n-butyl chloride, giving [Pt₂(μ-S)(μ-SBu)(EPh₃)₄]⁺ (E = P, As), which with Me₂SO₄ gave a mixture of [Pt₂(μ-SMe)(μ-SBu)(PPh₃)₄]²⁺ and [Pt₂(μ-SMe)(μ-SBu)(AsPh₃)₃Cl]⁺.Reactivity towards 1,2-dichloroethane follows a similar pattern.The formation and ESI MS detection of mixed phosphine-arsine {Pt₂S₂} species of the type[Pt₂(μ-S)₂(AsPh₃)_n(PPh₃)_4−n] is also discussed. Coordination chemistry of [Pt₂(μ-S)₂(AsPh₃)₄] towards a range of metal-chloride substrates, forming sulfide-bridged trinuclear aggregates, has also been probed using ESI MS, and found to be similar to the phosphine analogue. The X-ray crystal structure of [Pt₂(μ-S)₂(AsPh₃)₄Pt(cod)](PF₆)₂ (cod = 1,5-cyclo-octadiene) has been determined for comparison with the (previously reported) triphenylphosphine analogue. ESI MS is a powerful tool in exploring the chemistry of this system; in some cases the derivatising agent p-bromobenzyl bromide is used to convert sparingly soluble and/or poorly ionising {Pt₂S₂} species into soluble, charged derivatives for MS analysis.     

A water soluble nanostructured platinum (0) metal catalyst from platinum carbonyl molecular clusters: Synthesis, characterization and application in the selective hydrogenations of olefins, ketones and aldehydes

High nuclearity platinum carbonyl cluster anions (Chini's clusters) have been used as precursors to prepare a platinum nanocatalyst. The ionic polyelectrolyte poly(diallyldimethylammonium chloride) has been used as the support material for anchoring [Pt₃₀(CO)₆₀]²⁻ via ion-pairing and subsequent stabilization of the nanoparticles. The polymer-supported material has been studied by spectroscopy (NIR, ¹³C NMR, and IR) and TEM before and after its use as a water soluble hydrogenation catalyst. The nanocatalyst is found to be effective for the chemoselective hydrogenation of olefinic, aldehydic and ketonic double bonds. For most of the substrates isolation of the product and reuse of the catalyst are extremely easy due to the automatic phase separation of the products from the catalyst. The spectral features of the fresh catalyst show retention of the carbonyl ligands and molecular identity of the parent cluster, but after use the carbonyl ligands appear to be lost. TEM of the supported material before and after use as a catalyst shows the presence of platinum nanoparticles with majority (≥70%) of the particles in the range of 2–6 nm. Smaller particles are dominant in the used catalyst and this observation is rationalized on the basis of the known reactivity of Chini's clusters with dihydrogen.     

Synthesis and characterization of organometallic conjugated polymers containing tricarbonyl(arene)chromium unit and platinum

Novel organometallic conjugated polymer containing (η⁶-arene)Cr(CO)₃ and platinum in the main chain was synthesized by dehydrohalogenation coupling reaction of (η⁶-1,4-diethynylbenzene)tricarbonylchromium with trans-(PBu₃)₂PtCl₂. The polymer was soluble in common organic solvents and has the number-average molecular weight of 31,000 by GPC analysis. The polymer exhibited an absorption peak derived from π-π^∗ interaction at 358 nm in the UV-Vis spectrum, which showed a red shift of approximately 90 nm compared to that of the model compound. The photochemical ligand exchange reaction of the polymer was also investigated.     

Reactivity of silyl-substituted heterobimetallic iron-platinum hydride complexes towards unsaturated molecules: Part II. Insertion of trifluoropropyne and hexafluorobutyne into the platinum-hydride bond

Insertion of hexafluorobutyne into the Pt-H bond of the heterobimetallic complexes [(OC)₃Fe{Si(OMe)₃}(μ-Ph₂PXPPh₂)Pt(H)(PPh₃)] (1a X = CH₂; 1b X = NH) yields the σ-alkenyl complexes [(OC)₃Fe{μ-Si(OMe)₂(OMe)}(μ-Ph₂PXPPh₂)Pt{C(CF₃)C(H)CF₃}] (3a X = CH₂; 3b X = NH). This insertion reaction is accompanied by dissociation of the platinum bound PPh₃ ligand and saturation of the vacant coordination site by a dative μ−η²-Si-O → Pt interaction. Addition of the Pt-H bond of 1a across the triple bond of 3,3,3-trifluoropropyne affords in a regiospecific manner [(OC)₃Fe{μ-Si(OMe)₂(OMe)}(μ-dppm)Pt{C(CF₃)CH₂}] (2) having the trifluoromethyl substituent on the α-carbon. Addition of RNC to 3 affords the isocyanide adducts [(OC)₃Fe{Si(OMe)₃}(μ-Ph₂PXPPh₂)Pt(CNR){C(CF₃)C(H)CF₃}] (4a R = t-Bu, X = CH₂; 4b R = 2,6-xylyl, X = CH₂; 4c R = 2,6-xylyl, X = NH). In dichloromethane solution 3a is gradually transformed into the C₄F₆-bridged compound [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt(CO)] 5. The Pt-bound carbonyl ligand of 5 is displaced by xylylisocyanide or trimethylphosphite affording the derivatives [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt(CNxylyl)] 6 and [(OC)₃Fe(μ-dppm)(μ-CF₃CCCF₃)Pt{P(OMe)₃}] 7. The molecular structures of 4a, 5 and 6 have been determined by X-ray diffraction studies.     

Nickel foam-based composite electrodes for electrooxidation of methanol

Nickel foam and five nickel foam-based composite electrodes were prepared for being used as anode materials for the electrooxidation of methanol in KOH solution containing 0.1 and 1.0 M of methanol. The layered electrodes composed of nickel foam, platinum nanoparticles, polyaniline (PANI) and/or porous carbon (C) prepared in various assemblies. As shown by SEM analysis, depending on the preparation conditions, the electrodes of different morphologies were obtained. Using the cyclic voltammetry method, the oxidation of methanol on nickel foam electrode was observed in the potential range 0.4 V ↔ 0.7 V, where the Ni(OH)₂/NiOOH transformation occurred. The presence of Pt particles in electrode gave rise to the increase in electrocatalytic activity in this potential range. For electrodes containing dispersed platinum catalyst (Ni/Pt, Ni/PANI/Pt and Ni/C/Pt), the oxidation of methanol was noted also in the potential range −0.5 V ↔ 0.1 V. The electrocatalytic activities of the examined electrodes toward methanol oxidation at low potentials were in order Ni/Pt > Ni/C/Pt > Ni/PANI/Pt, whereas at high potentials in order Ni/PANI/Pt > Ni/Pt> Ni/C/Pt > Ni. Among the examined electrodes, the most resistant to cyclic poisoning appeared to be the Ni/C/Pt electrode. Presented at the 4Th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005