X-ray crystallographic structure and physical properties of the pentacoordinated [TPAFeCl] complex

A new pentacoordinated ferrous compound [TPAFeCl]⁺ (TPA = tris(2-pyridylmethyl)amine) was synthesized from the reaction between H₃TPA(ClO₄)₃ and Fe(PⁿPr₃)₂Cl₂ in MeCN. The unique trigonal bipyramidal [TPAFeCl]⁺ complex was characterized as a S = 2 high spin complex based on the crystallographic structure, magnetic susceptibility, ¹H NMR spectrum and semi-empirical ZINDO/S calculations. Crystal of [TPAFeCl]₂(FeCl₄)(MeCN)₂ was monoclinic with a = 12.019(2) Å, b = 27.550(5) Å, c = 14.138(2) Å, β = 94.168(3)°, V = 4668.9(13) Å³, space group C/c, and the unit cell contained a racemic mixture of Δ and Λ isomers with ferrous tetrachloride anion.     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

Chemoenzymatic Synthesis of Cellular Adhesion Tripeptide RGD Precursor in Organic Media

IntroductionA characteristic tripeptide sequence Arg-Gly-Asp(RGD) that is found within fibronectin and other rela-ted adhesion molecules in extracellular matrices(ECM)has received considerable attention from researcherssince it was proved to be a recognit…     

Direct synthesis, characterization of Cu-SBA-15 and its high catalytic activity in hydroxylation of phenol by H2O2

Transition metal copper substituted mesoporous silica (Cu-SBA-15) was synthesized using triblock copolymers surfactant as template agent under acidic condition. The result Cu-SBA-15 was characterized with XRD, ICP-AES, FT-IR and N₂ adsorption–desorption measurements, which prove that Cu(II) was mainly incorporated into the framework of Cu-SBA-15. Its catalytic activity was studied for phenol hydroxylation using H₂O₂ (30%). The substituting element (Cu²⁺) is incorporated into the framework position forming a new type of active site which raises the phenol conversion to 62.4% and the diphenol (the mixture of catechol (CAT) and hydroquinone (HQ)) selectivity to 97%. The Cu-SBA-15 has very high selectivity for catechol (about 71% selectivity), which is completely different from that of the microporous titanium silicalite zeolites (47.1% phenol conversion and about 50% selectivity to CAT under same reaction conditions). The results obtained indicate that the selective oxidation of phenol with H₂O₂ by a radical substitution mechanism.     

Cu-P系稀土耐候钢中最佳稀土含量的研究

利用光学显微镜、图像分析仪和电子探针对低氧低硫的10PCuRE耐候钢板坯进行了观察和检测,采用干-湿周浸室内加速试验方法测得了试验钢的腐蚀率.用电化学方法测得了带锈样的阳极极化曲线.研究得出对于S:～0.004%,O:～0.002%的10PCuRE耐候钢,最佳稀土含量为0.0065%～0.012%,此稀土含量对非金属夹杂物的变质作用和耐蚀性能的提高最为有利.     

Determination of daidzein and genistein in soybean foods by automated on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography

An automated on-line method for the determination of the isoflavones, daidzein and genistein, was developed using in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). In-tube SPME is a new extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary by repeated draw/eject cycles of sample solution. Daidzein, genistein and their glucosides tested in this study were clearly separated within 8 min by HPLC using an XDB-C8 column with diode array detection. In order to optimize the extraction of these compounds, several in-tube SPME parameters were examined. The glucosides daidzin and genistin were analyzed as aglycones after hydrolysis because the glucosides were not concentrated by in-tube SPME. The optimum extraction conditions for daidzein and genistein were obtained with 20 draw/eject cycles of 40 microl of sample using a Supel-Q porous layer open tubular capillary column. The extracted compounds were easily desorbed from the capillary by mobile phase flow, and carryover was not observed. Using the in-tube SPME-HPLC method, the calibration curves of these compounds were linear in the range 5-200 ng/ml, with a correlation coefficient above 0.9999 (n = 18), and the detection limits (S/N = 3) were 0.4-0.5 ng/ml. This method was successfully applied to the analysis of soybean foods without interference peaks. The recoveries of aglycones and glucosides spiked into food samples were above 97%.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Polarization Dependent Photoinduced Supramolecular Chirality in High-Performance Azo Materials

Here, we will show photo-induced supramolecular chirality in thin films of achiral amorphous polymers with azo groups in their side-chain. A matter of particular interest is the effect of various film thicknesses on azimuthal rotation and ellipticity of incident/transmitted polarized light. Furthermore, we investigated the temporal stability of inscribed chirality. By polarimetric measurements, we found out that the azimuthal rotation gets higher with layer thickness. In this scope, we were able to measure a very high azimuthal rotation of Δψ/d=112.5∘/μm. The inscribed chirality was stable for several days. Furthermore, we investigated the time-resolved behavior of incident and transmitted polarization ellipticities for various thicknesses. The time dependency may be explained by a two-step process: (1) fast trans-cis-isomerization resulting in photo-orientation and (2) slow photo-induced mass flow.     

Molecular Basis of the Dynamic Strength of the Sialyl Lewis X—Selectin Interaction

The selectins are Ca²⁺‐dependent cell adhesion molecules that facilitate the initial attachment of leukocytes to the vascular endothelium by binding to a carbohydrate moiety as exemplified by the tetrasaccharide, sialyl Lewis X (sLeX). An important property of the selectin‐sLeX interaction is its ability to withstand the hydrodynamic force of the blood flow. Herein, we used single‐molecule dynamic force spectroscopy (DFS) to identify the molecular determinants within sLeX that give rise to the dynamic properties of the selectin/sLeX interaction. Our atomic force microscopy (AFM) measurements revealed that the unbinding of the selectin/sLeX complexes involves overcoming at least two activation barriers. The inner barrier, which determines the dynamic response of the complex at high forces, is governed by the interaction between the Fuc residue of sLeX and a Ca²⁺ ion chelated to the lectin domain of the selectin molecule, whereas the outer activation barrier can be attributed to interactions involving the sialic acid residue of sLeX. Due to their steep inner activation barriers, the selectin‐sLeX complexes are less sensitive to high pulling forces. Hence, besides its contribution to the bond energy, the Ca²⁺ ion also grants the selectin–sLeX complexes a tensile strength that is crucial for the selectin‐mediated rolling of leukocytes.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.