Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Morphology and electric conductivity of cross-linked polyethylene–carbon black blends prepared by gelation/ crystallization from solutions

 Ultra-high-molecular-weight polyethylene (UHMWPE) – carbon black (CB) blends were prepared by gelation/ crystallization from PE dilute solutions containing CB particles. The UHMWPE/CB composition chosen were 1/0.15, 1/0.25, 1/0.5, 1/0.75, 1/1, 1/3, 1/5, and 1/9, etc. The cross-linking of PE chains was performed by chemical reaction of dicumyl-peroxide at 160 ^°C. X-ray diffraction patterns indicate that the crystallinity of PE within the blends decreased drastically through the chemical reaction at high temperature. The sample preparation method by gelation/crystallization provided the UHMWPE–CB system with various CB contents up to 90% and the conductivities for the resultant specimens were in the range from 10^-9 to 1 Ω^-1 cm^-1 corresponding to the electric conductivity range of semiconductors. The blends assured thermal stability of electric conductivity by cross-linking of PE chains, although the mechanical property such as the storage and loss moduli were very sensitive to temperature. The conductivity of the blends with CB content ≥20% were almost independent of temperature up to 220 ^°C and the values in the heating and cooling processes were almost the same. On the other hand, for the UHMWPE–CB blends with 13% CB content corresponding to the critical one, temperature dependence of electric resistivity showed positive temperature coefficient (PTC) effect. The PTC intensities for non-cross-linked and cross-linked materials were lower than that of the corresponding low-molecular-weight-polyethylene (LMWPE)–CB blend but the maximum peak appeared at 160 ^°C which is higher than the peak temperature of LMWPE–CB blend. Received: 10 December 1997 Accepted: 9 April 1998     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

Li2O·nB2O3-20%LiCl-H2O体系20℃过饱和溶液结晶动力学研究

用动力学方法对Li₂O·nB₂O₃-20%LiCl-H₂O体系(n=1,2,3)20℃过饱和溶液结晶过程进行研究，结果表明每一种溶液只析出一种固相，Li₂O∶B₂O₃=1∶1、1∶2和1∶3的氯化锂溶液分别结晶出Li₂O·B₂O₃·4H₂O, Li₂O·2B₂O₃·3H₂O和Li₂O·5B₂O₃·10H₂O，拟合并给出结晶动力学方程，同时对这三种固相的结晶反应机理进行了探讨。     

尼龙1010结构与性能研究进展（下）：结晶,熔融,性质,改性

本文介绍了尼龙１０１０的结晶过程与动力学、晶体的熔融与转化；并论述了其稀溶液、热降解与动态力学性质及共聚、共混、填充、增强、交联改性方面的研究进展。     

Molecular fractionation in isotactic polypropylene during isothermal crystallization

The nucleation frequency of isotactic polypropylene shows for certain molecular weight distributions during isothermal crystallization a “stepwise” development of the nuclei as a function of time. The resulting curve can be fitted by a superposition of exponential functions assuming a separate nucleation density for each nucleation step. The multimodal nucleation is discussed as a consequence of molecular fractionation effects during crystallization. Received: 23 October 1997 Accepted: 12 May 1998     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Melt-crystallization, glass transition and morphology of a (R)-3-hydroxybutyrate pentamer

The melt-crystallization of an oligo[(R)-3-hydroxybutyrate] with five repeating units has been analyzed using standard and temperature-modulated calorimetry, optical microscopy, and atomic force microscopy. Specimens of different crystallinity and supermolecular structure were generated by variation of the rate of cooling of a quiescent melt, or by variation of the temperature of isothermal crystallization. Completely amorphous samples can be obtained by cooling of the melt at a rate of 40 K min⁻¹, or faster, to a temperature lower than the glass transition. The crystallinity depends on the crystallization temperature. The maximum enthalpy-based crystallinity of about 40-45% is obtained by crystallization at temperatures lower than the temperature of the maximum crystallization rate, which is between 310 and 320 K. Analysis of the apparent heat capacity in metastable structural equilibrium reveals reversible melting at temperatures between 320 and 370 K by observation of an excess heat capacity above the level of the vibrational heat capacity, i.e., in the temperature range of irreversible reorganization and melting. The reversible melting is discussed in the context of coupling of the crystalline and amorphous phases, and compared to earlier studies on oligoethylene and oligo(oxyethylene). The presence of crystals causes formation of a rigid amorphous fraction of about 30% at a crystallinity of 40%. Optical and atomic force microscopy reveal spherulitic crystallization. At relatively high crystallization temperature, and in the early stage of the crystallization process, dendrites are observed which finally yield spherulites of decreased perfection. Larger spherulites of higher perfection grow at relatively low crystallization temperature, as deduced from the appearance of the Maltese cross, and the regularity of banding. The band spacing is less than 5 μm, as is accurately determined by atomic force microscopy. The temperature dependence of the spherulitic growth rate is in accord with the calorimetric analysis of the crystallization rate.     

聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。