Study of adsorption of oxygen on β-Al2O3 + Au and β-Al2O3 + Pt: Work function measurements—proposition of a model

To improve the understanding of the electrochemical effects observed on an original potentiometric gas sensor, interactions of oxygen with the device were investigated. This gas sensor is made of a solid electrolyte (treated Na-β-alumina) associated with two metallic electrodes (gold and platinum) located in the same gas mixture. Adsorption of charged oxygen species, considered responsible for the electrical response developed by the sensor, was investigated by work function measurements. Results showed that charged oxygen species only form on partially gold or platinum covered solid electrolyte. Comparison of these results with those obtained in a previous calorimetric study of interactions between oxygen and the same materials suggests the existence of at least two different oxygen species adsorbed on the surface of the sensitive element. The first one, located on the solid electrolyte surface, is neutral and characterized by an endothermal reaction of formation. The second one is charged and probably produced at the gas/solid electrolyte/metallic electrode interface. A mechanism based on the concept of “three phase boundary” and similar to the “reverse spillover” phenomenon is proposed to account for the adsorption of these oxygen species.     

吸附溶出伏安法测定毗喳酮的研究

本文报道了用吸附溶出伏安法测定毗喳酮.以悬汞电极为工作电极，在Na}B,O,-NaOH介质(pH=10)中，毗喳酮产生一尖锐的吸附还原峰,E，二一1. 29V (vs. SCE )，峰电流与毗喳酮浓度在2. 0 X 10-'-8. 0 X 10-smol " L-’范围内呈良好的线性关系.检测限为2. 0 X 10-0mol " L-'(富集90s).本文对毗喳酮在悬汞电极上的电化学行为进行了探讨，对测定毗喳酮的最佳条件进行了详细的选择，利用本法测定了片剂中毗喳酮含量，结果满意.     

Heat of adsorption and density distribution in slit pores with defective walls: GCMC simulation studies and comparison with experimental data

The adsorption behavior (capacity, density distribution and packing density) and the isosteric heat versus loading in a slit pore whose walls contain defective graphene layers are investigated in this paper. The defective wall is characterized by the extent and size of the defect. Simulation results obtained with the Grand Canonical Monte Carlo method reveal complex patterns of isosteric heat, and this complex behavior is a result of the interplay between three factors: (i) the surface heterogeneity (solid-fluid interaction, sites with varying degree of affinity), (ii) fluid-fluid interaction and (iii) the overlapping of potentials exerted by the two defective walls. We illustrate this with argon adsorption in pores of various sizes, and results obtained from the simulation agree qualitatively with the experimental data at 77 K on Saran microporous S600H and micro-mesoporous S84 charcoals of Beebe et al. [R.A. Beebe, B. Millard, J. Cynarski, J. Am. Chem. Soc. 75 (1953) 839]. The S600H was found to contain pores predominantly in the neighborhood of 7 Å with 30% of defect and a defective size of 2.84 Å. This is consistent with the argument made by Beebe et al. that this sample is a microporous solid and most pores can accommodate only one layer. The other sample, S84, has larger pores than S600H, and it is found that it has a wider pore size distribution and the pore width is centered at about 12 Å.     

Enzymes immobilized on montmorillonite: comparison of performance in batch and packed-bed reactors

Summary The enzymes a-amylase, invertase and glucoamylase were immobilized on acid activated montmorillonite using two techniques, viz. adsorption and covalent binding, and their activities were tested in a batch and packed-bed reactor and were compared. The packed-bed reactor showed an improved performance for all immobilized enzymes, which was attributed to lowering of diffusional restrictions to mass transfer. Lower activity in case of batch reactor for immobilized invertase was due to a combined effect of loss of native conformation of enzyme on account of immobilization and mass transfer resistances due to improper diffusion of substrate to the active site of enzyme. For immobilized glucoamylase, the packed-bed reactor demonstrated exceptionally high activity that was very close to the free enzyme. Covalently bound glucoamylase showed higher activity than the free enzyme.     

现场拉曼光谱研究乙腈在金电极上的解离吸附行为

利用共焦显微拉曼系统、结合合适的电极表面粗糙方法研究了非水体系 0 1mol/LLiClO4 /CH3CN溶液中 ,乙腈分子在金表面的吸附和解离行为。结果表明非水体系中乙腈可在金表面发生还原反应 ,产物CN- 离子与电极表面作用形成的表面配合物可在较宽的电位区间吸附于电极表面。溶液中的微量水、激光照射以及电极电位均对该反应有较大的影响。通过拉曼谱图的比较得出乙腈分子解离出的CN- 在金电极表面比在银电极表面有更强的吸附作用。     

Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

Succinic acid adsorption from fermentation broth and regeneration

More than 25 sorbents were tested for uptake of succinic acid from aqueous solutions. The best resins were then tested for successive loading and regeneration using hotwater. The key desired properties for an ideal sorbent are high capacity, complete stable regenerability, and specificity for the product. The best resins have a stable capacity of about 0.06 g of succinic acid/g of resin at moderate concentrations (1–5 g/L) of succinic acid. Several sorbents were tested more exhaustively for uptake of succinic acid and for successive loading and regeneration using hot water. One resin, XUS 40285, has a good stable isotherm capacity, prefers succinate over glucose, and has good capacities at both acidic and neutral pH. Succinic acid was removed from simulated media containing salts, succinic acid, acetic acid, and sugar using a packed column of sorbent resin, XUS 40285. The fermentation byproduct, acetate, was completely separated from succinate. A simple hot water regeneration successfully concentrated succinate from 10 g/L (inlet) to 40–110 g/L in the effluent. If successful, this would lower separation costs by reducing the need for chemicals for the initial purification step. Despie promising initial results of good capacity (0.06 g of succinic/g of sorbent), 70% recovery using hot water, and a recovered concentration of >100 g/L, this regeneration was not stable over 10 cycles in the column. Alternative regeneration schemes using acid and base were examined. Two (XUS 40285 and XFS-40422) showed both good stable capacities for succinic acid over 10 cycles and >95% recovery in a batch operation using a modified extraction procedure combining acid and hot water washes. These resins showed comparable results with actual broth.     

Enthalpies of sorption of linear hydrocarbons (C2–C8) and chloroderivatives of methane and ethylene on the surface of hydrotalcite

Differential molar adsorption enthalpies (DMAE) were determined by gas chromatographic measurements of specific retention volume of vapors on the surface of two forms of Mg–Al hydrotalcite. A linear dependence of the DMAE on the number of the carbon atoms in hydrocarbons was observed for both form of hydrotalcite. The dependence of the differential molar adsorption enthalpies on the number of chlorine atoms in organic molecules is discussed. A linear dependence of DMAE on the molecular weight of chloroderivatives of methane and ethylene on the basic form in an order monochloromethane < dichloromethane < trichloromethane or vinylidene chloride < 1,1-dichloroethylene < trichloroethylene was found.     

Bio-regeneration of p-complexation desulfurization adsorbents

More and more stringent regulations of gasoline and diesel oil were proposed with the awareness of environmental protection. Hydrodesulfurization (HDS) is a conventional method to remove sulfur compounds for industrial purpose. The main drawbacks of this …