Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

One-bond 1J(15N,H) coupling constants at sp2-hybridized nitrogen of Schiff bases,enaminones and similar compounds: A theoretical study

¹J(¹⁵N,H) coupling constants for enaminones and NH-forms of intramolecularly hydrogen-bonded Schiff bases as model compounds for sp²-hybridized nitrogen atoms are evaluated using density functional theory (DFT) to find the optimal functionals and basis sets. Ammonia is used as a test molecule and its one-bond coupling constant is compared with experiment. A methylamine Schiff base of a truncated molecule of gossypol is used for checking the performance of selected B3LYP, O3LYP, PBE, BHandH, and APFD density functionals and standard, modified, and dedicated basis sets for coupling constants. Both in vacuum and in chloroform, modeled by the simple continuum model of solvent, the modified basis sets predict significantly better the ¹J(¹⁵N,H) value in ammonia and in the methylamine Schiff base of a truncated molecule of gossypol than the standard basis sets. This procure is then used on a broad set of intramolecularly hydrogen-bonded molecules, and a good correlation between calculated and experimental one-bond NH coupling constants is obtained. The ¹J(¹⁵N,H) couplings are slightly overestimated. The calculated data show for hydrogen-bonded NH interatomic distances that the calculated values depend on the NH bond lengths. The shorter the bond lengths, the larger the ¹J(¹⁵N,H). A useful correlation between ¹J(¹⁵N,H) and NH bond length is derived that enables realistic predictions of one-bond NH coupling constants. The calculations reproduce experimentally observed trends for the studied molecules.     

Metal–organic framework of amine‐MIL‐53(Al) as active and reusable liquid‐phase reaction inductor for multicomponent condensation of Ugi‐type reactions

Metal–organic framework of NH₂‐MIL‐53(Al), with coordinative unsaturated aluminium sites, has been shown to be active in the Groebke–Blackburn–Bienaymé multicomponent coupling reaction based on Ugi‐type amine and aldehyde condensation over isocyanide and then a cyclization process. Interestingly this reaction occurred under solvent‐free conditions with high yield, in which the NH₂‐MIL‐53(Al) could be recovered and reused for five reaction cycles, giving a total turnover number of 455.     

A facile and efficient synthesis of 3‐cyanoindoles by a simple palladium(II)‐catalyzed C─H activation of indoles

An efficient trans ‐PdCl₂(NH₂CH₂COOH)₂‐catalyzed direct C3‐cyanation of indole C─H bonds is described. Notably, free (N─H)‐indoles reacted smoothly using the procedure, and the desired product 3‐cyanoindoles were obtained in good to excellent yields.     

煤热解过程中含氮产物的析出及金属离子的催化特性研究

选择3种典型煤种为研究对象,通过脱灰和添加含Fe、Ca、Na等金属盐,研究煤热解过程中金属离子对含氮气相产物析出特性的影响以及与煤种和温度的交互关联。结果表明,脱灰煤HCN和NH3的产率均比原煤样下降,而随温度的升高HCN的产率逐渐增大,NH3的产率则先增加后减小,在800℃有最大值。金属离子对不同变质程度煤的含氮气相产物析出的催化作用不同;Fe和Na抑制中等变质程度煤HCN的析出,而对低变质程度煤起促进作用,Ca则对HCN的析出均有一定的促进作用。而对于NH3的形成,3种离子均对中等变质程度煤有抑制作用,而对低变质程度的煤则有促进作用。不同金属离子对HCN和NH3析出的催化作用均有一定的范围。煤热解时含氮气相产物的析出是煤中固有多种金属离子共同作用的结果。     

铋基钙钛矿(CH3NH3)3Bi2I9薄膜的制备及在光伏电池中的应用

铋基钙钛矿由于稳定性强及毒性低,被认为是未来极具发展潜力的环保型钙钛矿材料。(CH₃NH₃)₃Bi₂I₉(MBI)因具有优异的光吸收性能而引起人们的普遍关注。本文介绍了MBI钙钛矿晶体的结构及性能,总结了其薄膜的制备方法,并重点叙述了不同方法制备的MBI钙钛矿薄膜在光伏电池中的应用情况。MBI钙钛矿与铅基钙钛矿的效率相比还有很大差距,如何提高其光电转换效率仍是今后研究的主要方向。     

铁基分子筛活性位点的制备控制及对NH3-SCR活性的影响

采用离子交换法,通过不同制备条件制备Fe-beta分子筛,并探讨不同制备条件对催化剂活性位点和NH3-SCR活性的影响。通过UV-Vis分析,将不同位置的吸收峰归属于不同的铁活性位点,300nm以下的高能谱区可以归属于孤立的Fe3+位点,300nm-400nm间归属于低聚的FexOy簇,而400nm以上为Fe2O3大颗粒聚合物。对比不同催化剂的SCR活性发现,孤立的Fe3+和低聚态的Fe3+是主要的活性位点,这两种物种的所占比例高低直接影响了催化剂的活性。而大尺度的Fe2O3为非活性位点,因尽量控制并降低其所占比例。另外低聚态的Fe3+所占比例越高,N2O的生成量越高,N2的选择性越差。因此,在制备过程中,除了控制大尺度的Fe2O3的含量,同时要尽量降低低聚态的Fe3+的含量,以增加N2的选择性。采用离子交换法制备Fe-beta催化剂,pH、交换温度、前驱体种类、硅铝比、煅烧条件等制备条件会对Fe-beta的活性位点造成影响,从而导致活性差异。根据实际应用需求,调控制备条件,可有效控制活性物种的分布,制备具有高效NH3-SCR活性的铁基分子筛催化剂。     

Mn-Ce-M复合改性无硅残渣炭催化剂的NH3选择性还原NO性能研究

生物质作为极具潜力的可再生能源,其热解制油技术备受关注,副产物残渣炭的高值化利用是当下重要的研究内容之一。脱硅处理不仅可实现硅的资源化利用,同时可以实现炭材料的结构改性。本文开展了残渣炭煮溶脱硅研究,并基于最佳脱硅方式,探究不同金属M（M：Ho、Sb、La、Nd）对无硅残渣炭（FRB）催化剂的脱硝性能的影响规律。结果表明：煅烧预处理结合煮溶脱硅可以脱除99%以上的SiO2,脱硅的同时理化性质显著改善,表现出较大的比表面积（1923 m2/g）、丰富的介/微孔结构以及表面含氧官能团,并促进了催化剂的SCR反应活性（250℃时NOx脱除率可达100%）。此外,Ho改性无硅残渣炭脱硝催化剂具有最好的低温脱硝活性,在200~300℃范围内保持80%以上的脱硝效率。表征结果显示,MnCeHo/FRB催化剂具有较强的表面酸性和氧化还原性,活性组分在载体上均匀分散,且表面化学吸附氧较为丰富。此外,In-situ DRIFTs实验表明MnCe/FRB催化剂表面同时存在E-R和L-H机理,但E-R机理占主要地位。     

NH3在硼纳米管表面吸附的密度泛函理论研究

利用密度泛函理论研究了NH₃在完整和含有缺陷的硼纳米管上的吸附行为以及相关电子性质. 计算结果表明, 对于α硼纳米管, 在不同的直径和手性条件下, NH₃均倾向于吸附在配位数为6的顶位上. 电子结构计算结果表明, NH₃能够吸附在纳米管表面主要是由于N和B原子产生了较强的相互作用. 表明硼纳米管是一种潜在的NH₃气气敏材料.