Infrared and Raman spectra of magnesium ammonium phosphate hexahydrate (struvite) and its isomorphous analogues. IX: Spectra of protiated and partially deuterated cubic magnesium caesium phosphate hexahydrate

Infrared and Raman spectra of cubic magnesium caesium phosphate hexahydrate, MgCsPO₄·6H₂O (cF100), and its partially deuterated analogues were analyzed and compared to the previously studied spectra of the hexagonal analogue, MgCsPO₄·6H₂O (hP50). The vibrational spectra of the cubic and hexagonal dimorphic analogues are similar, especially in the regions of HOH stretching and bending vibrations. In the difference IR spectrum of the slightly deuterated analogue (<5% D), one distinctive band appears at 2260 cm⁻¹ with a small shoulder at around 2170 cm⁻¹, but only one band is expected in the region of the OD stretchings of isotopically isolated HDO molecules. The small weak band could possibly result from second-order transitions (a combination of HDO bending and some libration of the same species) rather than statistical disorder of the water molecules. By comparing the IR spectra in the region of external vibrations of water molecules of the protiated compound recorded at RT (room temperature) and at LNT (liquid nitrogen temperature) and those in the series of the partially deuterated analogues, it can be stated with certainty that the bands at 924 and 817 cm⁻¹ result from librations of water molecules, rocking and wagging respectively. And the band at 429 cm⁻¹ can be safely attributed to a stretching Mg–O_w mode. In the ν₃(PO₄) and ν₄(PO₄) region in the infrared spectra, one band in each is observed, at 995 and 559 cm⁻¹, respectively. In the region of the ν₁ modes, in the Raman spectrum of the protiated compound, one very intense band was observed at 930 cm⁻¹ which is only insignificantly shifted to 929 cm⁻¹ in the spectrum of the perdeuterated compound. The band at 379 cm⁻¹ in the Raman spectrum could be assigned to the ν₂(PO₄) modes. With respect to the phosphate ion vibrations, the comparison between the two polymorphic forms of MgCsPO₄·6H₂O and their deuterated compounds shows that ν₁(PO₄) and ν₃(PO₄) appear at lower wavenumbers in the cubic phase than in the hexagonal phase. These data are in full agreement with the lower repulsion potential at the cubic lattice sites compared with that for the hexagonal lattice sites.     

微波处理和溶胶凝胶法共同改性废胶粉及其与天然橡胶复合材料性能的研究

采用微波处理打断废胶粉(WRP)的三维网状结构用来提高WRP在有机溶剂中的溶胀性,然后采用溶胶凝胶法,将微波改性后的WRP浸入正硅酸乙酯中,通过水解反应和缩合反应,在WRP表面原位生成SiO2网络,从而制得改性废胶粉(MWRP).将制得MWRP与天然橡胶(NR)共混,制备了NR/MWRP复合材料,研究了NR/MWRP复合材料的性能.通过热重分析仪、差示扫描量热仪和力学分析表明微波处理最佳时间是20 s.由于微波处理提高了NR与WRP的相容性,原位生成的SiO2粒子起到了补强作用,所以所制备的NR/MWRP复合材料拥有较好的力学性能;随着Si69的加入,抑制了SiO2粒子聚集,提高了SiO2粒子的分散性,从而进一步提高复合材料的力学性能并降低复合材料的Payne效应;在进行频率扫描时,硫化胶的储存模量随频率的增大而增大;硫化胶的温度扫描结果表明,随着温度的升高,复合材料中SiO2粒子聚集程度加剧并且复合材料出现老化的现象.为了提高复合材料的耐老化性能,N,N-间苯撑双马来酰亚胺(BMI)作为一种防老剂加入复合材料中,BMI利用Diels-Aider反应补偿橡胶在老化过程中所损失的交联键并提高NR与WRP的界面相容性,从而提高复合材料的耐老化性能.     

爆炸条件下溶菌酶反应产物的基质辅助激光解吸-飞行时间质谱分析

以爆炸条件下溶菌酶的反应产物为研究对象,运用基质辅助激光解吸-飞行时间质谱的方法研究其反应产物与不同炸药的反应特征性.结果显示,雷管的使用不会对溶菌酶有影响,而在有爆炸物爆炸的条件下,除了正常溶菌酶酶解多肽信号外,一些[MH+17]+,[MH+18]+,[MH+28]+,[MH+32]+和[MH+44]+的加合峰信号也能被检测到.这可能是在炸药爆炸过程中产生的一些活性小分子(如NH3,H2O,CO/N2,O2,CO2)与溶菌酶发生反应得到的反应产物.不同炸药生成的活性小分子能够分别与溶菌酶的某些反应位点反应生成特征性的反应产物,有利于这些炸药的分析与检测.     

Structure of the calcium pyrophosphate monohydrate phase (Ca2P2O7·H2O): towards understanding the dehydration process in calcium pyrophosphate hydrates

Calcium pyrophosphate hydrate (CPP, Ca₂P₂O₇·nH₂O) and calcium orthophosphate compounds (including apatite, octacalcium phosphate etc.) are among the most prevalent pathological calcifications in joints. Even though only two dihydrated forms of CPP (CPPD) have been detected in vivo (monoclinic and triclinic CPPD), investigations of other hydrated forms such as tetrahydrated or amorphous CPP are relevant to a further understanding of the physicochemistry of those phases of biological interest. The synthesis of single crystals of calcium pyrophosphate monohydrate (CPPM; Ca₂P₂O₇·H₂O) by diffusion in silica gel at ambient temperature and the structural analysis of this phase are reported in this paper. Complementarily, data from synchrotron X‐ray diffraction on a CPPM powder sample have been fitted to the crystal parameters. Finally, the relationship between the resolved structure for the CPPM phase and the structure of the tetrahydrated calcium pyrophosphate β phase (CPPT‐β) is discussed.     

Effect of calcination temperature on structure and characteristics of calcium oxide powder derived from marine shell waste

Marine fishery wastes such as bivalve shells, crab shells and cuttlebone are rich in calcium. Calcium carbonate derived from these materials can be transformed into calcium oxide by calcination, which is used in a wide variety of applications (e.g., biomaterials for bone and teeth implants and drugs). In this study we analyze the effects of calcination temperatures (550 °C, 700 °C and 900 °C) on characteristics and elemental composition of calcium oxide derived from shells of four marine species collected in Thailand: oyster (Saccostrea cucullata), green mussel (Perna viridis), blue swimming crab (Portunus pelagicus), and cuttlefish (Sepia brevimana). The XRD patterns indicated the complete transformation of calcium carbonate into calcium oxide, observed by the changes of diffraction angles at 900 °C for all calcined samples, except cuttlebone, which was calcined successfully at 700 °C. Likewise, the FT-IR results revealed changes of functional groups at the same calcination temperatures. In addition, ICP-OES showed the effects of calcination temperature on elemental contents: major elements (Ca, P and K) increased in all samples, and some minor elements increased in blue swimming crab shell (Zn and Cu) and oyster shell (Fe) as a result of increasing the calcination temperature. This study demonstrates the optimum calcination temperature of calcium oxide production from four types of marine wastes that might be benefit for the chemical compound production industry.     

Dielectric properties and study of AC electrical conduction mechanisms by non-overlapping small polaron tunneling model in Bis(4-acetylanilinium) tetrachlorocuprate(II) compound

In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σ_ac, has been analyzed by Jonscher's universal power law σ(ω)=σ_dc+Aω^s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.     

柱前衍生-超高效液相色谱法测定3种奶粉中18种氨基酸

近年来羊奶粉和骆驼奶粉备受消费者青睐,它们具有潜在的低致敏性,因此成为牛乳不耐受人群尤其是婴幼儿的母乳替代品,其营养价值备受关注。牛奶粉、羊奶粉和骆驼奶粉中氨基酸含量的比较研究鲜有报道。利用酸水解得到游离氨基酸,选择6-氨基喹啉-N-羟基琥珀酰亚胺氨基甲酸酯(AQC)进行柱前衍生,超高效液相色谱分离并检测,外标法定量。18种氨基酸在各自线性范围内线性关系良好,相关系数(r ²)大于0.999;以3倍和10倍信噪比(S/N)确定方法的检出限(LOD)和定量限(LOQ),分别为1.3~2.5 (mg/100 g)和3.9~7.5 (mg/100 g)。方法验证采用奶粉标准参考物质SRM 1849a,测定值符合其含量范围,6次测定值的相对标准偏差(RSD)为2.04%~3.65%。采用建立的方法分别对市售和网购的牛奶粉、羊奶粉和骆驼奶粉进行18种氨基酸成分和含量分析,旨在从氨基酸角度对这3种不同来源乳品进行对比。该方法快速,灵敏度高,准确可靠,适用于不同基质乳粉中18种氨基酸成分和含量的确定。     

Carbon Nanotube Reinforced Titanium Metal Matrix Composites Prepared by Powder Metallurgy—A Review

Titanium-based metal composites (TMCs) are showing great potential to replace existing traditional materials in aerospace, automotive, and other high temperature engineering applications. This is due to their excellent mechanical, thermal, and physical properties and improved strength to weight ratio. Weight savings in the aerospace industry results in higher efficiency. Carbon nanotubes (CNTs), because of their low density and high Young's modulus, are considered to be an excellent reinforcement for metal matrix composites (MMCs). In the last 20 years extensive research has been carried out to investigate the combination of carbon nanotubes with aluminum, nickel, copper, magnesium, and other metal matrices. The production techniques such as mechanical alloying through powder metallurgy routes and their effects on the mechanical properties of CNT reinforced TMCs are reviewed in this article. The role of the volume fraction of carbon nanotubes and their dispersion into the metal matrix are highlighted. Governing equations to predict the mechanical and tribological properties of CNT reinforced titanium matrix composites are deduced. With the help of this initial prediction of properties, the optimal processing parameters can be optimized. Successful development of CNT reinforced TMCs would result in better wear and mechanical behavior and enhance their ability to withstand high temperature and structural loading environments.     

Electrochemical Biosensors Based on Enzymatic Reactor of Silver Solid Amalgam Powder for Measurements in Flow Systems

An enzymatic reactor based on silver solid amalgam powder was suggested as the main part of biosensors in flow systems for the first time. Biosensors were tested with following enzymes: ascorbate oxidase, glucose oxidase, catalase, tyrosinase and laccase. The current response of each biosensor was optimized with respect to the detection potential, flow rate, the injection and reactor volume. Relative standard deviation for detection with the studied enzymes was found to be in the range of 0.81–2.1 %. The biosensor with the ascorbate oxidase reactor was used for determination of ascorbic acid in the vitamin tablets Celaskon.     

C.I.颜料红177中间体的制备工艺改进

本文较为系统地研究了铜粉催化剂加入方式对C.I.颜料红177中间体4,4'-二氨基-1,1'-二蒽醌-3,3'-二磺酸(DAS)合成过程中的乌尔曼偶联反应速率的影响规律。 研究结果表明,在55 ℃较佳反应温度下,先加入与溴氨酸钠质量比为2:5的铜粉,反应一段时间后再加入与溴氨酸钠的质量比为1:5的铜粉,与一次性加入与溴氨酸钠的质量比为3:5的铜粉相比较,综合反应时间可节省2~3 h。 另外,对于DAS中混有的铜盐,采取在制备过程中加入柠檬酸的方法予以去除,此举可提高DAS的纯度。 当铜粉与柠檬酸的质量比为6:1时,可使DAS中铜盐的含量小于0.001%。 此外还探究了蒸馏后滤液的剩余量对DAS收率的影响,结果表明,滤液的剩余量在20 mL时,DAS的收率在95%以上。 基于本文的研究结果提出,欲进一步提高该反应的收率,需要寻找更高效的催化剂。