One-pot Synthesis of 1,5-Diaza-2,6-cyclooctadiene-3,7-dicarboxylates Through a Multiple-component Reaction

Methyl propiolate, formaldehyde, and various acyclic amines were assembled in one-pot into a series of 1,5-diaza-2,6-cyclooctadiene-3,7-dicarboxylates in moderate to good yields. This multiple-component reaction benefits from operational simplicity as well as good material economy.     

Synthesis of Methyl Acetate by Dimethyl Ether Carbonylation over Cu/HMOR: Effect of Catalyst Preparation Method (cited: 2)

Dimethyl ether carbonylation to methyl acetate was comparatively investigated over mor-denite supported copper (Cu/HMOR) catalysts prepared by different methods including evaporation, urea hydrolysis, incipient wetness impregnation and ion-exchange. The resultsshowed that Cu/HMOR prepared via iron-exchange method exhibited the highest catalytic activity due to the synergistic effect of active-site metal and acidic molecular sieve support. Conversion of 95.3% and methyl acetate selectivity of 94.9% were achieved under conditions of 210 oC, 1.5 MPa, and GSHV of 4883 h^-1. The catalysts were characterized by nitrogen absorption, X-ray diffraction, NH₃ temperature program desorption, and CO temperature program desorption techniques. It was found that Cu/HMOR prepared by ion-exchange method possessed high surface area, moderate strong acid centers, and CO adsorption cen-ters, which improved catalytic performance for the reaction of CO insertion to dimethyl ether.     

Cu/SiO2催化剂结构对乙酸甲酯加氢性能的影响

采用尿素水解法制备了Cu/SiO₂催化剂, 探究其用于乙酸甲酯(MA)加氢制取乙醇的催化性能, 并通过N₂物理吸附、X射线衍射(XRD)、程序升温还原(TPR)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等表征方法分析了催化剂的物理化学特性, 探究了铜负载量和还原温度等对催化剂结构的影响, 以及与催化活性之间的关系. 发现在铜负载量分别为10%、20%和30% (质量分数, w)的催化剂中, 铜负载量为20%的催化剂因具有较多且分散均匀的活性组分而表现出最佳的加氢效果. 接着在铜负载量为20%的催化剂上研究了还原温度(270, 350, 450 ℃)对催化性能的影响, 发现在350 ℃下还原的催化剂活性最高, 在最佳的反应条件下, 乙酸甲酯转化率达到97.8%, 乙醇选择性达到64.9% (理论最大值为66.6%), 主要归属于它具有较高的铜物种分散度, 最合适的Cu⁰/(Cu⁰+Cu⁺)摩尔比例, 同时实现了解离氢气和活化乙酸甲酯的功能.     

氮气对电晕放电等离子体降解甲基蓝的影响

电晕放电等离子体技术是近年发展起来的一种新型高级氧化工艺,因其处理效果好、操作简单、占地面积小的特点在印染废水处理领域得到了广泛应用。目前因大部分有机污染物的降解机理不详,该技术尚处于探索阶段。因此,为了尽早将电晕放电等离子体技术应用于工业印染废水的处理,不同污染物降解机理的研究对该技术的工业化和产业化应用具有重要意义。至今,电晕放电等离子体技术对研究较多的染料的降解效果均较好,然而,是否适合所有染料的降解有待进一步研究。采用电晕放电等离子体技术处理三苯甲烷类染料甲基蓝,研究了溶液的初始浓度对甲基蓝紫外-可见光谱中芳香环的降解率、发色基团吸光度变化的影响,测定了溶液的浓度、总有机碳（TOC）、总氮（TN）、pH值等指标随着放电时间的变化,并对其相关性进行了分析。结合紫外-可见光谱（UV-Vis）、三维荧光光谱（3D-fluorescence）和傅里叶变换红外光谱（FTIR）三种光谱学手段分析了电晕放电降解甲基蓝过程溶液的颜色、荧光物质和官能团变化,分析了电晕放电降解甲基蓝30 min后生成的中间产物。结果表明：电晕放电等离子体降解甲基蓝过程,溶液的浓度随着放电时间的延长逐渐减小,表明该技术对甲基蓝溶液有一定的降解能力;降解过程高压电极放电击穿含有大量氮气的空气产生N,NO·,N+₂等含氮高活性粒子,这些粒子通过扩散作用迁移至液相,使得溶液中TN含量在整个降解过程逐渐升高;另有部分含氮高活性粒子与钨钢针电极溶出的C元素键合生成发色的CN双键,使得溶液中的总有机碳在放电5 min时有所升高。延长反应时间产生的高活性粒子与溶液中的有机物（甲基蓝及中间产物）继续作用,部分有机物矿化生成CO₂,引起溶液中TOC含量的下降。电晕放电相同时间内产生的活性粒子数量相当,增大甲基蓝浓度,未被降解的甲基蓝分子越多,导致甲基蓝降解率的减小。电晕放电过程甲基蓝分子之间的聚合与发色CN双键的生成共同促使甲基蓝发色基团吸光度在放电5 min时达到最大;且甲基蓝溶液的初始浓度越高,吸光度（A₅-A₀）升高的越多。概括来说,甲基蓝结构中发色CN双键的存在是电晕放电等离子体降解甲基蓝过程溶液颜色加深再变浅的主要原因。反应过程羟基自由基的消耗导致放电5 min时溶液的pH值升高;随着反应的进行溶液中生成的硝酸及小分子酸增强了溶液的酸性,导致pH值降低。三维荧光光谱结果表明,甲基蓝降解过程出现了三类明显的荧光峰,位于E_X/E_M=310~320/430~450,E_X/E_M=240~250/320~340和E_X/E_M=280/340,分别代表腐殖酸类物质、芳香族蛋白质和溶解性微生物代谢副产物。甲基蓝溶液降解前的荧光物质主要为腐殖酸类,随着降解时间的延长,腐殖酸类物质首先降解生成了芳香族蛋白质,进一步降解产生可溶性微生物代谢副产物。比较电晕放电前后甲基蓝溶液的红外光谱图和红外分峰图发现,甲基蓝结构中N-H键3 432.8 cm-1处不对称伸缩振动峰红移了0.3 cm-1,烯烃和苯环上C-H键2 975.9 cm-1处的伸缩振动峰向高波数偏移了0.5 cm-1,1 638.7 cm-1处RCHCHR的双键伸缩振动位置蓝移了3.2 cm-1,芳仲胺的C-N伸缩振动峰1 341.6 cm-1向高波数偏移了1.3 cm-1,磺酸基SO的伸缩振动峰1 121.1和1 034.3 cm-1分别红移了3.8和13 cm-1,甲基蓝结构中的环外CC双键与CN双键吸收峰消失,在1 692.4和1 400.4 cm-1处分别出现了CO和NO的伸缩振动吸收峰,产生了2,5-环己二烯-1,4-二酮、对硝基苯磺酸钠和芳香酮类等中间产物。该结果对于利用电晕放电等离子体技术处理甲基蓝废水具有重要的理论意义和实用价值。     

Theoretical Studies on the Kinetics and Mechanisms of Reactions for Methyl Vinyl Ether and Ozone

利用量子化学从头计算的方法对甲基乙烯醚的两个异构体之间的转化、臭氧与甲基乙烯醚的环加成反应、臭氧化物的裂解以及主要臭氧化物异构体的之间的转化的反应通道进行了研究,并用经典过渡态理论在280~440 K计算了反应的速率常数．对于臭氧和甲基乙烯醚的反应,考虑了臭氧从两个可能的不同方向进攻甲基乙烯醚．计算结果表明,顺式-甲基乙烯醚是比较稳定的,但是反式-甲基乙烯醚与臭氧反应所要跨越比较低的能垒, 分别为1.7和7.5 kJ/mol,而其产物更稳定,在形成的臭氧化物中占绝对比例,臭氧化物的裂解主要导致CH2-OO的生成,在298 K时的反应速率常数为4.8×10^-17 cm3/(molecule?s)．     

Ag3PO4/rectorite nanocomposites: Ultrasound-assisted preparation,characterization and enhancement of stability and visible-light photocatalytic activity

To overcome the drawback of low stable brought by the transformation of Ag⁺ into Ag, a highly efficient and stable photocatalyst Ag₃PO₄/rectorite composite was successfully synthesized by ultrasound-assisted precipitation method. The as-prepared samples were characterized by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, N₂ adsorption-desorption, room-temperature photoluminescence spectra, Fourier transform infrared spectrum measurements and UV–vis diffuse reflectance spectra. The absorption edges of the Ag₃PO₄/rectorite display a noticeable shift to the visible light region as compared to that of the Ag₃PO₄. Compared with bare Ag₃PO₄, the Ag₃PO₄/rectorite composite by ultrasound-assisted precipitation process exhibits significantly enhanced photocatalytic activity and stable for methyl orange (MO) degradation under visible light irradiation. The improved activity of the Ag₃PO₄/rectorite photocatalyst could be attributed to the expanded visible light absorption, the enhanced interfacial charge transfer and the inhibited recombination of electron-hole pairs. Therefore, the facile ultrasound-assisted preparation process provides some insight into the application of Ag₃PO₄/rectorite nanocomposites in photocatalytic degradation of organic pollutants.     

Comparative Studies on Degradation of Methyl Orange by Nanostructured Zinc and Zinc Oxide Films

Nanostructured zinc and zinc oxide films were prepared by magnetron sputtering processes and succeeded air annealing treatments. Comparison of reductive degradation rate of methyl orange (MO) by zinc films and photocatalytic degradation rate of MO by zinc oxide films was carried out. Both reductive degradation and photocatalytic degradation process of MO by zinc and zinc oxide films can be described by first order kinetic model. It was found that although MO liquid was most quickly decolorized by metallic zinc films, the mineraliza-tion of MO was not thorough. Observation of extra ultraviolet absorption peaks indicated the formation of aromatic intermediates. On the other hand, although the photocatalytic degradation rate of MO liquid by ZnO films was only as about 1/4 large as the reductive degradation rate by zinc films, no signs of aromatic intermediates were found. Moreover, it was found that partially oxidized zinc oxide film showed higher photocatalytic efficiency than the totally oxidized ZnO films. Synergy effect between zinc and zinc oxide phase in the partially oxidized films was considered to be responsible for the higher photocatalytic efficiency.     

甲基对硫磷分子印迹聚合物光谱研究

以甲基对硫磷为模板分子,分别以甲基丙烯酸、丙烯酰胺和4-乙烯基吡啶为功能单体,合成了三种分子印迹聚合物。利用紫外光谱研究了甲基对硫磷与不同功能单体间作用力的大小,表明4-乙烯基吡啶与甲基对硫磷间的作用力明显强于另外两种单体。红外光谱研究表明4-乙烯基吡啶可以同模板分子的P—O—C和—NO₂部位发生反应,并形成稳定的共价化合物,而另外两种单体仅在P—O—C部位与模板分子缔合。此外,由三种分子印迹聚合物的红外光谱图可以看出,在聚合物表面确实存在着可与模板分子相互作用的官能团。     

甲基丙烯酸甲酯的原子转移自由基悬浮聚合

以 1 苯基氯乙烷为引发剂 ,氯化亚铜为催化剂 ,2 ,2 联吡啶为配体 ,外加搅拌 ,氮气保护下进行了甲基丙烯酸甲酯 (MMA)在 80℃下的原子转移悬浮聚合 .结果表明 ,聚合反应符合对单体浓度为一级的动力学关系 .经计算聚合体系的增长自由基浓度为 5 .74× 10 - 8mol L .聚合物分子量随转化率呈线性增加 ,分子量分布较窄 ,Mw Mn 在 1.37～ 1.40之间 .还以AIBN为引发剂 ,在三氯化铁和三苯基膦存在下进行了MMA的反向原子转移本体和悬浮聚合研究 .结果证明本体聚合具有好的可控特征 ,分子量随转化率呈线性增长 ,分子量分布指数在 1.2 7～ 1.31之间 .聚合反应速率较快 ,聚合体系中的增长自由基浓度较高 ,为 1.6 4× 10 - 7mol L .而在此催化体系下的悬浮聚合则完全失去了活性特征     

4-(S)-[2-(N-甲基)吗啉基 ]-5-(R )-(l-薄荷烷氧基 )-丁内酯结构分析

N－甲基吗啉对5－（l－薄荷烷氧基）－2（5H）－呋喃酮的光催化不对称共轭加生成了4－（S）－[2－（N－甲基）吗啉基]－5－（R）－(l－薄荷烷氧基）－丁内酯,在四氢呋喃（THF）对比实验、参比物^13CNMR对照及不同溶剂^13CNMR测定的基础上,该新化合物的结构用高分辨率的子核磁共振谱、碳核磁共振谱、质谱、红外光谱及元素分析、旋光度等数据进行了确证。