Studying the process of ionization of hydrogen in conditions of its forced delivery to a porous nickel oxide electrode

The hydrogen ionization process is studied experimentally on an industrial sintered nickel oxide electrode in models of sealed nickel-metal hydride batteries. It is shown that the hydrogen ionization rates that are reached during overcharge by high current densities in conditions of forced gas delivery into the electrode pores (up to 40 mA cm^?2) exceed the self-discharge rate of a nickel-hydrogen battery by two orders of magnitude. Up to 70% of hydrogen delivered into the compact assembly block undergoes ionization during forced charge of models of sealed nickel-metal hydride batteries with a closed hydrogen cycle. Two independent methods (potentiostatic and manometric) are used to determine the relationship between rates of hydrogen ionization with the degree of the electrode filling with gas and perform estimation of the process intensity at a unit reaction surface. It is established that, in conditions of forced gas delivery, practically all the hydrogen oxidation current is generated at the surface of the nickel oxide electrode beneath thin films of an electrolyte solution at the rate of 4–5 mA cm^?2. It is shown that the hydrogen oxidation rate on a nickel oxide electrode filled in part by gas is independent of the electrode potential, probably because of a tangible contribution made by diffusion limitations to the overall hampering of the process.     

催化剂薄层内甲烷水蒸气重整反应强化管内对流换热的数值模拟

本文以竖直圆管内壁催化剂薄层内发生甲烷水蒸气重整反应强化对流换热作为研究对象,对其进行了数值模拟．结果发现,催化剂薄层内的吸热化学反应可以有效地强化对流换热,降低流体和壁面温度,从而对壁面起到保护作用;极限热流密度的大小与流体的入口温度有关,存在最佳入口温度使极限热流密度最大．     

Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

A solvent-free synthesis of coumarins using a Wells-Dawson heteropolyacid as catalyst

Substituted coumarins are synthesized from phenols and β-ketoesters by the Pechmann reaction, using a Wells-Dawson heteropolyacid (H₆P₂W₁₈O₆₂·24H₂O) as catalyst by a solvent-free procedure. This one requires low reaction times, 130 °C temperature and as little as 1 mol % of Wells-Dawson acid, obtaining good to excellent yields of coumarins. The catalyst showed to be reusable with no differences in the yields. The results are compared with those of the reactions performed in toluene solution. The presented synthetic procedure is a convenient, clean and fast alternative for synthesizing 4-substituted coumarins (17 examples).     

Preparation of rhodium–phyllosilicate catalysts without leaching in liquid-phase 1-hexene hydrogenation

Rhodium catalysts have been prepared on palygorskite and montmorillonite (clay) supports by reduction with hydrogen (1 atmosphere) at room temperature of a cationic organometallic rhodium compound anchored to the support. The activity of these catalysts for the hydrogenation of liquid-phase 1-hexene remains constant with increase of prehydrogenation time and with re-use for several runs. No rhodium leaching is observed.     

Li3N、Mg3N2、Ca3N2催化作用的比较和分析

 Li₃N、Mg₃N₂和Ca₃N₂是高温高压下以hBN为原料合成cBN的催化剂。在实验中发现它们对常压高温下生成hBN的反应也表现出催化作用。对比了三种氮化物催化效果的差异，发现三种氮化物都只有在熔融状态下才能表现出催化效果，以及三种氮化物对生成hBN反应的催化效果与它们在高温高压下合成cBN反应的催化效果次序相似。提出了对合成hBN有催化作用的化合物也将对合成cBN表现出催化作用的观点。     

Evidence of a Photo‐Radical Pathway Responsible of the Rearrangement of a Manganese(III)‐Schiff Base Complex in Solution

A new Mn^III‐Schiff base complex, [MnL(OH₂)](ClO₄) ( 1 ) (H₂L = N, N′‐bis‐(3‐Br‐5‐Cl‐salicylidene)‐1, 2‐diimino‐2‐methylethane), an inorganic model of the catalytic center (OEC, Oxygen Evolving Complex) in photosystem II (PSII), has been synthesized and characterized by elemental analysis, IR and EPR spectroscopy, mass spectrometry, magnetic susceptibility measurement and the study of its redox properties by cyclic and normal pulse voltammetry. This complex mimics reactivity (showing a relevant photolytic activity), and also some structural characteristics (parallel‐mode Mn^III EPR signal from partially assembled OEC cluster) of the natural OEC. The complex 1 was found to rearrange in solution into a crystallographically solved square‐pyramidal complex, [MnLL′] ( 2 ) (HL′ = 6‐bromo‐4‐chloro‐2‐cyanophenol), through a process, which probably liberates radical species (detected by EPR), and provokes a C—N bond cleavage in the ligand. A photo‐radical mechanism is discussed to explain this rearrangement.     

Liquid-phase noncatalytic butene oxidation with nitrous oxide

The kinetics and mechanism of noncatalytic liquid-phase oxidation of but-1-ene and but-2-ene with nitrous oxide in a benzene solution in the temperature range from 180 to 240°C were studied. Oxidation proceeds via the 1,3-dipolar cycloaddition mechanism to form carbonyl compounds. Both of these reactions occur with close rates and activation energies and have the first orders with respect to the alkene and N₂O. A considerable fraction (39%) of but-1-ene involved in oxidation undergoes cleavage at the double bond yielding propanal and an equivalent amount of methylene, the latter producing ethylcyclopropane and cycloheptatriene. The oxidation of but-2-ene proceeds with a minimum bond cleavage and affords methyl ethyl ketone with 84% selectivity. Regularities of the oxidation of terminal and internal alkenes C₂—C₈ with nitrous oxide were analyzed using the previously published data. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 925–933, April, 2005.     

A simplified green chemistry approach to the Biginelli reaction using ‘Grindstone Chemistry’

Grindstone Chemistry--a greatly evolved version of Toda’s method of grinding solids together for solvent-free chemical reactions--has been described and its usefulness illustrated by the successful application of this technique to a simplified process for conducting the multi-component Biginelli reaction for the synthesis of physiologically active tetrahydropyrimidinones.     

Rhodium-catalyzed addition of arylstannanes to carbon-heteroatom double bond

The addition of arylstannanes to the carbon-heteroatom double bond in the presence of a catalytic amount of a cationic rhodium complex ([Rh(cod)(MeCN)₂]BF₄) was examined. The reactions of aldehydes, α-dicarbonyl compounds, and N-substituted aldimines with the arylstannanes gave corresponding alcohols, α-hydroxy carbonyl compounds, and amines, respectively. An arylrhodium complex generated by the transmetalation with the arylstannane was probably the active catalytic species.