A New Polymer Flooding Agent Prepared Through Intermacromolecular Complexation

Abstract

This paper reports a new polymer flooding agent used for enhanced oil recovery (EOR), poly(acrylamide-acrylic acid) [P(AM-AA)]/poly(acrylamide-dimethyldiallylammonium chloride) [P(AM-DMDAAC)] polyelectrolyte complex. The solution viscosity of prepared P(AM-AA)/P(AM-DMDAAC) complex is enhanced due to the strong interaction between the two oppositely charged copolymers, i.e., P(AM-AA) and P(AM-DMDAAC), which were prepared through radical copolymerization. The ionic content could be controlled by changing the reaction conditions. The structures of the two copolymers were characterized through FT-IR, ¹H NMR, and acidic and precipitation titration. The formation as well as the factors affecting the P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex were investigated by means of viscosity measuring and light transmittance testing. The experimental results show that the composition of the copolymers, the pH value, and the concentration of the polymer solutions have remarkable effects on the formation of P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex and the solution viscosity. When DMDAAC content in P(AM-DMDAAC) is 3.2 mol%, AA content in P(AM-AA) is 48–58 mol%, the weight ratio of P(AM-AA) to P(AM-DMDAAC) is 70/30–30/70, the pH value of the solution is 6–10, and the concentration of solution is 1000–3500 ppm, then a homogeneous solution of P(AM-AA)/P(AM-DMDAAC) poly-electrolyte complex could be obtained which exhibits a much higher solution viscosity compared with its components.     

Preparation of a Conducting Flexible Material from Silane Coupling Agent and Hydroxyl Terminated Polybutadiene Rubber by Hydrolysis and Condensation

Abstract

Synthesis and characterization of a flexible polymer produced from silane coupling agent (SCA) and hydroxyl terminated polybutadiene (HTPB) were performed. Mechanical properties of chemically and electrochemically prepared conducting composites synthesized from this polymer were investigated. Conductivities of the composites were also measured. Polypyrrole enhanced the mechanical properties of the chemically prepared conducting composite. Doping with iodine greatly changed the conductivity of the composite. However, the change in mechanical properties and the conductivities of the electrochemically prepared composite were not as significant when compared with the electrochemically prepared polypyrrole. Among the composites, a chemically prepared composite was highly flexible like rubber. However, the electrochemically produced composite possesses two orders of magnitude higher conductivity. Also, this composite revealed higher tensile strength and elasticity with respect to pristine polypyrrole.     

Poly(3,5‐dichloroaniline) Doped with Different Sulfonic Acids

Poly(3,5‐dichloroaniline) was prepared by chemical oxidation in the presence of various sulfonic acids as doping agent, using potassium permanganate as oxidant. 1‐Naphtalene sulfonic acid, 2‐naphatalene sulphonic acid, 1,5‐naphtalene disulfonic acid, and p‐toluenesulfonic acid were the acids of choice. Infrared and UV‐Vis spectroscopy, utilized to characterize the polymers, revealed that the compounds exist in the emeraldine (conductive) oxidation state. The level of doping, conductivity, and morphology were determined as well. The presence of a sulfonic acid produces a morphological change, from granular to microtubule structures, which is responsible for the strong increase in the conductivity of the polymer.     

The Psymberin Story—Biological Properties and Approaches towards Total and Analogue Syntheses

Psymberin is a marine natural product which has attracted a great deal of interest since its isolation: While the highly cytotoxic compound was detected early on as an ingredient in a marine sponge, it took over a decade and 600 additional samples for the structure to eventually be assigned. In the last eight years fascinating synthetic and biosynthetic investigations have led to a more detailed understanding as well as a new starting point for structure–activity studies towards new antitumor compounds. The Review gives an in‐depth insight into the progress in the field of the marine polyketide psymberin and demonstrates how organic synthesis is influencing neighboring scientific subjects.     

不同调节剂制备MOF-Fe的性质及对Se（Ⅳ）的吸附性能

以HF、HCl、H₂O和NaAc溶液为调节剂合成了4种MOF-Fe样品,用X射线衍射（XRD）、透射电镜（TEM）、N₂等温吸附-脱附、综合热分析（TG/DTG和DTA）和质子电位滴定研究了4种样品的结构与表面性质,以及对亚硒酸根（Se（Ⅳ））等温吸附特性。MOF-Fe（HF）、MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（NaAc）四种样品均具有八面体MIL-100（Fe）的晶体结构,但它们的结晶度和晶面取向略有差异。4种样品的比表面积分别为1 683、1 517、1 641和1 734 m²·g^-1,其总孔体积依次降低,微孔孔径分别为1.27、1.22、1.22和1.17 nm。MOF-Fe（HF）样品的脱羧基失重峰温度最高（415℃）,苯环碳化失重峰温度最低（462℃）;MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（NaAc）样品出现了因氧化铁被碳还原所致的失重平台（566~716℃）。样品悬浮液从pH=6.0降到3.0时,消耗H⁺的量表现为MOF-Fe（H₂O） > MOF-Fe（HCl） > MOF-Fe（HF）=MOF-Fe（NaAc）,它们的电荷零点（pH_ZPC）依次为3.1、3.5、3.6和3.5。MOF-Fe（NaAc）、MOF-Fe（HCl）、MOF-Fe（H₂O）和MOF-Fe（HF）对Se（Ⅳ）的吸附亲和力依次减小,它们对Se（Ⅳ）的吸附容量（Q_m）分别为77.69、107.07、117.40和87.15 mg·g^-1。显著性分析显示,MOF-Fe的羟基密度与样品吸附Se（Ⅳ）的Q_m显著正相关。研究结果表明,MOF-Fe样品的结构热稳定性和羟基/配位水分子等活性位点密度受合成样品时加入的调节剂影响,用HF作为调节剂合成MOF-Fe样品有利于提高样品中羧基与苯环之间的C-C键合强度和热分解产物的稳定性,降低苯环碳化温度;HCl和H₂O作为调节剂有利于提高样品的活性位点密度,可提高MOF-Fe样品对Se（Ⅳ）吸附容量。     

Application of poly(vinylphenyltrimethylammonium tribromide) resin as an efficient polymeric brominating agent in the α-bromination and α-bromoacetalization of acetophenones

The applications of a new supported tribromide reagent based on poly(vinylbenzyltrimethylammonium hydroxide) resin (Amberlite 717) were reported. This supported tribromide resin was used directly in α-bromination and α-bromoacetalization of acetophenones without any other catalyst under mild conditions. The effects of solvents and the amount of the supported tribromide resin on the reactions were investigated. Under the optimal conditions, most of α-bromo and α-bromoacetal of acetophenones were selectively obtained in excellent yields.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Efficient and Industrially Viable Synthesis of Donepezil

An efficient, economically viable process has been developed for large‐scale preparation of donepezil HCl (1), an anti‐Alzheimer's agent. The process involves the condensation of 5,6‐dimethoxy‐1‐indanone (3) and 1‐benzyl‐4‐piperidinecarboxaldehyde (4) in the presence of alkalimetal carbonates at elevated temperature to yield 1‐benzyl‐4‐[(5,6‐dimethoxy‐1‐indanone)‐2‐yidenyl] methyl piperidine (2), the key intermediate in the synthesis of donepezil. Hydrogenation of 2 yields donepezil.     

PCC-Promoted Dehydration of Aldoximes: A Convenient Access to Aromatic,Heteroaromatic, and Aliphatic Nitriles

A simple and convenient procedure for the synthesis of nitriles by dehydration of aldoximes using a PCC (pyridiniumchlorochromate) has been developed. A variety of aromatic, heteroaromatic, and aliphatic aldoximes are converted.

Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the full spectral details.     

Synthesis of gemini surfactants with twelve symmetric fluorine atoms and one singlet F MR signal as novel F MRI agents

A family of fluorinated gemini surfactants derived from perfluoropinacol has been synthesized as novel ¹⁹F magnetic resonance imaging (¹⁹F MRI) agents. These fluorinated surfactants with 12 symmetric fluorine atoms and one singlet ¹⁹F MR peak can be conveniently prepared from perfluoropinacol and oligo(ethylene glycols) on multi-gram scales. Solubility, hydrophilicity (log P), and critical micelle concentration (CMC) measurements of these fluorinated surfactants indicated that high aqueous solubility can be achieved by introducing oligo(ethylene glycols) with appropriate length into perfluoropinacol, i.e., manipulating the fluorine content (F%). One of these fluorinated surfactants with high aqueous solubility and excellent ¹⁹F MR properties has been identified by ¹⁹F MRI phantom experiments as a promising ¹⁹F MRI agent.