Isolation and Characterization of Badge Hydrolysis Products

Heating a suspension of Bisphenol A diglycidyl ether (BADGE) in 20 : 80 tetrahydrofuran/water at 70°C and subsequent passage of the resulting solution through C18 columns allowed isolation and purification to > 97% of each of the two hydrolysis products 2-[4-(2,3-dihydroxypropoxy) phenyl]-2-[4-(2,3-epoxypropoxy)phenyl]propane (1HP) and 2,2-bis[4-(2,3-dihydroxypropoxy)phenyl] propane (2HP), which were characterized by UV, IR, ₁H and _I3C NMR spectroscopy and mass spectrometry.     

Temperature and Solvent Effects on the Europium(III)-catalyzed Hydrolysis of Bis-(nitrophenyl) Phosphate

The hydrolysis of bis-(nitrophenyl) phosphate (BNPP) as model for secondary phosphate esters is analyzed at six different concentrations of Eu(III) ions and four temperatures between 303 and 343 K. Eyring plots yield activation enthalpy parameters which with, e.g. [Eu 3+ ] between 0.40 and 10.0 mM drop from 130 to 74 kJ mol m 1 , respectively, with a relatively small drop in the opposing entropy contributions. The observed saturation profiles allow for the first time to evaluate the influence of j H and j S separately on the Michaelis-Menten values K M and k cat , showing that the catalytic metal-ion effects are largely due to changes in k cat and dominated by favorable j H changes. Preliminary studies of the solvent influence show a surprising difference between water mixtures with either ethanol or DMSO. With, e.g. 40% ethanol, one observes a doubling of the rate constant, with 40% DMSO an almost 10-fold rate decrease. In both cases, a linear correlation with the solvent polarity parameter E T is found.     

Thermal degradation and fire performance of intumescent silicone‐based coatings

This paper deals with the thermal degradation and fire performance of silicone‐based coatings for protecting steel. In this study, the fire performance of silicone coatings as virgin or formulated materials is evaluated using two homemade fire testing methodologies: one similar to the “torch test” fire testing method and the other using a heat radiator test. It was shown that the performance of the silicone‐based coating used as thermal barrier can be improved incorporating a modifier (a mixture of polydimethylsiloxane and silica coated by a silane). In this case, silicone‐based coating swells and exhibits same fire performance as commercial intumescent coating at the torch test. It is shown that the incorporation of modifier in the silicone makes it to swell upon heating resulting in the formation of expanded material exhibiting low heat conductivity. Thermal degradation of the coating is also investigated: it occurs in three main steps leading to the formation of a tridimensional network characterized by the formation of Q⁴ structure at high temperature. Copyright © 2012 John Wiley & Sons, Ltd.     

涡流发生器污垢特性实验台的设计

为了研究涡流发生器的污垢特性设计了一个能够在线监测温度、流量以及压差进而可以直接得到污垢热阻的实验台。通过验证实验、准确性分析与误差分析,验证了实验台设计精度在允许的误差范围内。示例实验结果表明实验台具有研究涡流发生器的污垢特性、压力特性以及换热特性的功能。     

Development and validation of a LC‐MS/MS method for quantitation of fosfomycin – Application to in vitro antimicrobial resistance study using hollow‐fiber infection model

Extensive use and misuse of antibiotics over the past 50 years has contributed to the emergence and spread of antibiotic‐resistant bacterial strains, rendering them as a global health concern. To address this issue, a dynamic in vitro hollow‐fiber system, which mimics the in vivo environment more closely than the static model, was used to study the emergence of bacterial resistance of Escherichia coli against fosfomycin (FOS). To aid in this endeavor we developed and validated a liquid chromatography–tandem mass spectrometry (LC‐MS/MS) assay for quantitative analysis of FOS in lysogeny broth. FOS was resolved on a Kinetex HILIC (2.1 × 50 mm, 2.6 μm) column with 2 mm ammonium acetate (pH 4.76) and acetonitrile as mobile phase within 3 min. Multiple reaction monitoring was used to acquire data on a triple quadrupole mass spectrometer. The assay was linear from 1 to 1000 μg/mL. Inter‐ and intra‐assay precision and accuracy were <15% and between ±85 and 115% respectively. No significant matrix effect was observed when corrected with the internal standard. FOS was stable for up to 24 h at room temperature, up to three freeze–thaw cycles and up to 24 h when stored at 4°C in the autosampler. In vitro experimental data were similar to the simulated plasma pharmacokinetic data, further confirming the appropriateness of the experimental design to quantitate antibiotics and study occurrence of antimicrobial resistance in real time. The validated LC‐MS/MS assays for quantitative determination of FOS in lysogeny broth will help antimicrobial drug resistance studies.     

Novel non-aggregated soluble metallophthalocyanines bearing carboxylic acid groups

Synthesis and characterization of zinc and cobalt phthalocyanines substituted with biphenylmethylpropionic acids, methyl-o-tolylpropionic acids, and methyl-p-tolylpropionic acids are described in this study. The new compounds have been characterized by elemental analyses, FT-IR, UV-Vis, MALDI-TOF, and ¹H NMR spectroscopy. All new compounds are soluble in THF, DMF, DMSO, and dilute sodium hydroxide solution. The influence of the carboxylic acid and bulky biphenyl, ortho-methylbenzyl and para-methylbenzyl groups on the spectroscopic properties has been investigated. UV-Vis experiments suggest that the tendency of phthalocyanines to aggregate in polar solvents is significantly reduced owing to the carboxylic acid groups and bulky peripheral substituents.     

Multiple Keys for a Single Lock: The Unusual Structural Plasticity of the Nucleotidyltransferase (4′)/Kanamycin Complex

The most common mode of bacterial resistance to aminoglycoside antibiotics is the enzyme‐catalysed chemical modification of the drug. Over the last two decades, significant efforts in medicinal chemistry have been focused on the design of non‐ inactivable antibiotics. Unfortunately, this strategy has met with limited success on account of the remarkably wide substrate specificity of aminoglycoside‐modifying enzymes. To understand the mechanisms behind substrate promiscuity, we have performed a comprehensive experimental and theoretical analysis of the molecular‐recognition processes that lead to antibiotic inactivation by Staphylococcus aureus nucleotidyltransferase 4′(ANT(4′)), a clinically relevant protein. According to our results, the ability of this enzyme to inactivate structurally diverse polycationic molecules relies on three specific features of the catalytic region. First, the dominant role of electrostatics in aminoglycoside recognition, in combination with the significant extension of the enzyme anionic regions, confers to the protein/antibiotic complex a highly dynamic character. The motion deduced for the bound antibiotic seem to be essential for the enzyme action and probably provide a mechanism to explore alternative drug inactivation modes. Second, the nucleotide recognition is exclusively mediated by the inorganic fragment. In fact, even inorganic triphosphate can be employed as a substrate. Third, ANT(4′) seems to be equipped with a duplicated basic catalyst that is able to promote drug inactivation through different reactive geometries. This particular combination of features explains the enzyme versatility and renders the design of non‐inactivable derivatives a challenging task.     

Copper(II) complexes of imino-bis(methyl phosphonic acid) with some bio-relevant ligands. Equilibrium studies and hydrolysis of glycine methyl ester through complex formation

Binary and ternary complexes of Cu(II) involving imino-bis(methyl phosphonic acid) (IdP) abbreviated as H₄A and some selected bio-ligands, amino acids, peptides and DNA constituents (L), were examined. Cu(II) forms CuA and CuAH complexes with IdP. Ternary complexes are formed in a stepwise mechanism whereby iminodiphosphonic acid binds to Cu(II), followed by coordination of amino acid, peptide or DNA. The concentration distribution of the various complex species has been evaluated. The kinetics of base hydrolysis of glycine methyl ester in the presence of Cu(II)-IdP was studied in aqueous solution at different temperatures, and in dioxane-water solutions of different compositions at 25°C. The activation parameters are evaluated and discussed.     

Origin of dc and ac electric transport phenomena in carbon/manganese oxide nanocomposite

Hybrid organic/inorganic nanocomposites based on manganese oxide nanoparticles enriched pyrogallol-formaldehyde matrix (PF/MnO) were synthesized by sol-gel technique. After a drying step, the samples were heated during 2 h at different pyrolysis temperatures between 600 and 1000 °C in tubular furnace under open nitrogen atmosphere. The obtained nanocomposites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and electrical technics in the measurement temperature range between 80 and 300 K. The XRD spectra show that PF/MnO nanocomposites are crystallized with the appearance of different phases: the graphite (C), the manganese oxide (MnO), the metallic manganese (Mn) and the manganese dioxide (MnO₂) with proportions depending on pyrolysis temperature. The measurement temperature dependence conductivity can be explained by Godet-Variable Range Hopping (3D-GVRH) conduction model in all samples with the presence of an exponential distribution of localized states. The voltage-current V(I) characteristics show the presence of negative differential resistance (NDR) in some samples. The ac conductance exhibits the dominance of hopping conduction mechanism and the Small Polaron Hopping (SPH) model. The Nyquist plots for the PF/MnO-650 °C nanocomposite obey at Cole-Cole model. The impedance spectra were fitted by an equivalent circuit involving two contributions attributed to grains and grain boundaries.