Ultrasound assisted enzyme catalyzed hydrolysis of waste cooking oil under solvent free condition

The present work demonstrates the hydrolysis of waste cooking oil (WCO) under solvent free condition using commercial available immobilized lipase (Novozyme 435) under the influence of ultrasound irradiation. The process parameters were optimized using a sequence of experimental protocol to evaluate the effects of temperature, molar ratios of substrates, enzyme loading, duty cycle and ultrasound intensity. It has been observed that ultrasound-assisted lipase-catalyzed hydrolysis of WCO would be a promising alternative for conventional methods. A maximum conversion of 75.19% was obtained at mild operating parameters: molar ratio of oil to water (buffer pH 7) 3:1, catalyst loading of 1.25% (w/w), lower ultrasound power 100 W (ultrasound intensity – 7356.68 W m⁻²), duty cycle 50% and temperature (50 °C) in a relatively short reaction time (2 h). The activation energy and thermodynamic study shows that the hydrolysis reaction is more feasible when ultrasound is combined with mechanical agitation as compared with the ultrasound alone and simple conventional stirring technique. Application of ultrasound considerably reduced the reaction time as compared to conventional reaction. The successive use of the catalyst for repetitive cycles under the optimum experimental conditions resulted in a loss of enzymatic activity and also minimized the product conversion.     

Investigation of polynuclear Zr(IV) hydroxide complexes by nanoelectrospray mass-spectrometry combined with XAFS

Polynuclear species of zirconium in acidic aqueous solution are investigated by combining X-ray absorption spectroscopy (XAFS) and nanoelectrospray mass spectrometry (ESI-MS). Species distributions are measured between pH_C 0 and pH_C 3 for [Zr] = 1.5–10 mM. While the monomer remains a minor species, with increasing pH the degree of polymerization increases and the formation of tetramers, pentamers, octamers, and larger polymers is observed. The high resolution of the mass spectrometer permits the unambiguous determination of polynuclear zirconium hydroxide complexes by means of their isotopic patterns. The relative abundances of mononuclear and polynuclear species present simultaneously in solution are measured, even if one of the species contributes only 0.1% of the Zr concentration. For the first time it has been directly observed that the hydrolysis of polynuclear Zr species is a continuous process which leads to charge compensation through the sequential substitution of water molecules by hydroxide ligands until doubly charged polymers dominate at conditions (H⁺ and Zr concentrations) close to the solubility of Zr(OH)₄(am). The invasiveness of the electrospray process was minimized by using very mild declustering conditions, leaving the polynuclear species within a solvent shell of approximately 20 water molecules. Figure Schematic Diagram of Multiplexed Measurement of 9 Anti-Nuclear Antibodies Using the AtheNa Multilyte Assay     

Isolation and identification of inulooligosaccharides resulting from inulin hydrolysis

In this study, inulooligosaccharides (F_n-type inulin) resulting from the endo-inulinase hydrolysis of globe artichoke inulin were purified and characterized. The aim was to produce F_n oligomer standards with the intention of identifying them in the complex inulin chromatogram. Inulin was extracted from globe artichoke and presented a high average degree of polymerization (DP) of about 80 as determined by high-performance anion exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD). This inulin was hydrolyzed by a commercial endo-inulinase yielding a product with a very high F_n/GF_n molecule ratio, thus limiting the interference of GF_n during the purification process. High-performance size exclusion chromatography was used to individually isolate and collect each retention peak corresponding to a specific oligomer. The purity of these fractions was checked by HPAEC-PAD and showed that relatively pure molecules were produced. Electrospray ionization mass spectrometry allowed the molecular weight determination of these purified oligomers and ascertained their DP as F₂, F₃ and F₄. These F_2-4 standards were used with glucose, fructose, sucrose and GF_2-4 (commercially available) to spike commercial oligofructose products in order to determine the elution profile in the HPAEC-PAD chromatogram.     

Products of hydrolysis of (ferrocenylmethyl)trimethylammonium iodide: Synthesis of hydroxymethylferrocene and bis(ferrocenylmethyl) ether

The attempted coupling of (ferrocenylmethyl)trimethylammonium iodide (1) with 1,4,7-(triformyl)-1,4,7,10-tetraazacyclododecane (2) in water led to the formation of the expected compound 1-(ferrocenemethyl)-4,7,10-(triformyl)-1,4,7,10-tetraazacyclododecane (3). In addition, hydrolysis of the ferrocenyl precursor 1 led to the formation of two other known compounds, hydroxymethylferrocene (4) and bis(ferrocenylmethyl) ether (5). An X-ray crystal structure determination of 4 revealed the presence of H-bonding between the hydroxyl groups of one molecule of 4 and the oxygen atom of an adjacent molecule resulting in a left-handed helical chain of molecules lying along the b-axis direction. The O?O distances are significantly shorter than those found in previously reported structures of hydroxymethylferrocene derivatives indicative of moderate strength H-bonding interactions. In the structure of 5, the orientation of the ferrocenyl groups are staggered relative to a vector comprising the two carbons of the C-O-C linker.     

Enhancement of catalytic activity by increasing surface area in heterogeneous catalysis

The use of nanoclusters in systems with confined void spaces such as inside mesoporous or microporous solids appears to be an efficient way of preventing aggregation of nanoclusters in their catalytic application. Zeolite-Y is considered as a suitable host providing highly ordered supercages with a diameter of 1.3 nm. Intrazeolite metal(0) nanoclusters were prepared at room temperature by ion-exchange of metal cations with the extra framework Na⁺ ions in Zeolite-Y, followed by the reduction of the metal cations in the cavities of Zeolite-Y with sodium borohydride in aqueous solution, whereby the Zeolite-Y is reloaded with Na⁺ ions. Hence, host framework remains intact as shown by using a multi-prong approach. Intrazeolite transition-metal(0) nanoclusters were isolated by suction filtration and drying in vacuum at room temperature and characterized by a combination of analytical methods. Intrazeolite metal(0) nanoclusters were tested as catalyst in the hydrolysis of sodium borohydride and ammonia-borane, both of which have been considered as a promising hydrogen storage materials. High catalytic activity and the outstandingly long lifetime of intrazeolite transition-metal(0) nanoclusters catalyst in the hydrogen generation from the hydrolysis of both sodium borohydride and ammonia-borane is demonstrated. The results are attributed to the small size of the nanoclusters within the zeolite cages as well as prevention of agglomeration of the nanoclusters.     

SYNTHESIS AND CHARACTERIZATION OF POLY{4-[2-(tert-BUTYLDIMETHYLSILOXY)ETHYL]STYRENE} AND ITS HYDROLYSIS DERIVATIVE

The living cationic polymerization of 4-[2-(tert-butyldimethylsiloxy)ethyl]styrene(TBDMES)was studied in methylcyclohexane(MeChx)/methylchloride(MeC1)(50/50 V/V)solvent mixture at-80℃.The initiator 1,1- diphenylethylene(DPE)capped 2-chloro-2,4,4-trimethylpentane(TMPCl)was formed in situ in conjunction with titanium tetrachloride(TiCl_4).The Lewis acidity of TiCl_4 was decreased by the addition of titanium(IV)isopropoxide(Ti(OiPr)_4)to accomplish living polymerization of TBDMES.Hydrolysis of poly(TBDMES)i...     

Hydrolytic Methods for the Quantification of Fructose Equivalents in Herbaceous Biomass

A low, but significant, fraction of the carbohydrate portion of herbaceous biomass may be composed of fructose/fructosyl-containing components (“fructose equivalents”); such carbohydrates include sucrose, fructooligosaccharides, and fructans. Standard methods used for the quantification of structural-carbohydrate-derived neutral monosaccharide equivalents in biomass are not particularly well suited for the quantification of fructose equivalents due to the inherent instability of fructose in conditions commonly used for hemicellulose/cellulose hydrolysis (>80% degradation of fructose standards treated at 4% sulfuric acid, 121°C, 1 h). Alternative time, temperature, and acid concentration combinations for fructan hydrolysis were considered using model fructans (inulin, β-2,1, and levan, β-2,6) and a grass seed straw (tall fescue, Festuca arundinacea) as representative feedstocks. The instability of fructose, relative to glucose and xylose, at higher acid/temperature combinations is demonstrated, all rates of fructose degradation being acid and temperature dependent. Fructans are shown to be completely hydrolyzed at acid concentrations well below that used for the structural carbohydrates, as low as 0.2%, at 121°C for 1 h. Lower temperatures are also shown to be effective, with corresponding adjustments in acid concentration and time. Thus, fructans can be effectively hydrolyzed under conditions where fructose degradation is maintained below 10%. Hydrolysis of the β-2,1 fructans at temperatures ≥50°C, at all conditions consistent with complete hydrolysis, appears to generate difructose dianhydrides. These same compounds were not detected upon hydrolysis of levan, sucrose, or straw components. It is suggested that fructan hydrolysis conditions be chosen such that hydrolysis goes to completion; fructose degradation is minimized, and difructose dianhydride production is accounted for.     

Complexes derived from the general copper(II)/maleamic acid/N,N′,N′′-chelate reaction systems: Synthetic,reactivity, structural and spectroscopic studies

The synthetic investigation of the Cu^II/maleamate(−1) ion (HL⁻)/N,N′,N′′-chelate general reaction system has allowed access to compounds [Cu₂(HL)₂(bppy)₂](ClO₄)₂·H₂O (1·H₂O), [Cu(HL)(bppy)(ClO₄)] (2) and [Cu(HL)(terpy)(H₂O)](ClO₄) (4) (bppy = 2,6-bis(pyrazol-1-yl)pyridine, terpy = 2,2′;6′,2′′-terpyridine). In the absence of externally added hydroxides, compound [Cu₂(L′)₂(bppy)₂](ClO₄)₂ (3) was obtained from MeOH solutions; L′⁻ is the monomethyl maleate(−1) ligand which is formed in situ via the Cu^II-assisted HL⁻ → L′⁻ transformation. In the case of tptz-containing (tptz = 2,4,6-tris(2-pyridyl)-1,3,5-triazine) reaction systems, the Cu^II-assisted hydrolysis of tptz to pyridine-2-carboxamide (L1) afforded complex [Cu(L1)₂(NO₃)₂] (5). The crystal structures of 1–5 are stabilized by intermolecular hydrogen bonding and π–π stacking interactions. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the ligands.     

Rapid controlled hydrolytic degradation of poly(l-lactic acid) by blending with poly(aspartic acid-co-l-lactide)

Although poly(lactic acid) is known as a biodegradable polymer, its hydrolytic degradation is extremely slow, taking years in water and in the human body. In this study the effects of blending oligomeric poly(aspartic acid-co-lactide) (PALs) on the hydrolytic degradation of poly(l-lactic acid) (PLLA) were studied in detail. It was found that the addition of PAL did not accelerate the hydrolysis of the PLLA in air (25 °C, 60% relative humidity), but significantly accelerated it in a phosphate buffer solution. The degradation rate becomes higher for the blends containing PAL with higher molar ratios of lactide to aspartic acid units, [LA]/[Asp], when PLLA/PAL blends prepared with different PALs are compared at the same PAL concentration. TEM results, in which the distribution of PALs with higher [LA]/[Asp] occurs at a smaller scale in blends, imply that higher miscibility of the PAL with PLLA results in higher contact area between the components, thereby accelerating the degradation efficiently.     

Tryst with a molecular and supramolecular oddity: an anti-Fürst-Plattner epoxide opening product as a designer additive for accessing an elusive polymorph

Additive induced polymorphism of a conformationally locked tetraacetate 3 in presence of its diastereomer 4 is described. The ester 3 was specially crafted on a trans-decalin backbone to relegate the O-H?O H-bond donors to the molecular interior and have the peripheral H-bond acceptors in 1,3-syndiaxial relationship. The supramolecular assembly of 3 was destined to evolve along two mutually exclusive pathways, namely one, which employs intermolecular O-H?O H-bonds (pathway 1) and the other that sacrifices these for intramolecular O-H?O H-bonds and settles for a crystal packing dictated by weak intermolecular interactions alone (pathway 2). Exploiting the similarity between the self-assemblies of 4 and the two recently reported dimorphs of 3, the ester 3 has been stimulated to follow the elusive non-hierarchical pathway 2 through preferential inhibition of pathway 1. Interestingly, the inhibitor 4 was obtained serendipitously en route3 via an apparent breakdown of Fürst-Plattner rule.